Close menu

List of International Organization for Standardization standards


Source: http://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards
Updated: 2017-08-31T17:32Z

This is a list of published[Note 1] International Organization for Standardization (ISO) standards and other deliverables.[Note 2] For a complete and up-to-date list of all the ISO standards, see the ISO catalogue.[1]

The standards are protected by copyright and most of them must be purchased. However about 300 of the standards produced by ISO and IEC's Joint Technical Committee 1 (JTC1) have been made freely and publicly available.[2]

ISO 1 – ISO 99

  • ISO 1:2016 Geometrical product specifications (GPS) - Standard reference temperature for the specification of geometrical and dimensional properties
  • ISO 2:1973 Textiles – Designation of the direction of twist in yarns and related products
  • ISO 3:1973 Preferred numbers – Series of preferred numbers
  • ISO 4:1997 Information and documentation – Rules for the abbreviation of title words and titles of publications
  • ISO 5 Photography and graphic technology – Density measurements
  • ISO 6:1993 Photography – Black-and-white pictorial still camera negative film/process systems – Determination of ISO speed
  • ISO 7 Pipe threads where pressure-tight joints are made on the threads
  • ISO 8:1977 Documentation – Presentation of periodicals
  • ISO 9:1995 Information and documentation – Transliteration of Cyrillic characters into Latin characters – Slavic and non-Slavic languages
  • ISO 11:1987 Aircraft – Ground pressure testing connections for pressure cabins
  • ISO 12:1987 Aerospace – Pipelines – Identification
  • ISO 14:1982 Straight-sided splines for cylindrical shafts with internal centering – Dimensions, tolerances and verification
  • ISO 15:2017 Rolling bearings – Radial bearings – Boundary dimensions, general plan
  • ISO 16:1975 Acoustics – Standard tuning frequency (Standard musical pitch)
  • ISO 17:1973 Guide to the use of preferred numbers and of series of preferred numbers
  • ISO 18:1981 Documentation – Contents list of periodicals
  • ISO 21:1985 Shipbuilding – Inland navigation – Cable-lifters for stud-link anchor chains
  • ISO 22:1991 Belt drives – Flat transmission belts and corresponding pulleys – Dimensions and tolerances
  • ISO 23:1993 Cinematography—Camera usage of 35 mm motion-picture film—Specifications
  • ISO 25:1994 Cinematography—Camera usage of 16 mm motion-picture film—Specifications
  • ISO 26:1993 Cinematography—Projector usage of 16 mm motion-picture films for direct front projection—Specifications
  • ISO 28:1976 Cinematography—Camera usage of 8 mm Type R motion-picture film—Specifications
  • ISO 29:1980 Cinematography—Projector usage of 8 mm Type R silent motion-picture film for direct front projection—Specifications [Withdrawn without replacement]
  • ISO 31 Quantities and units [withdrawn: replaced with ISO/IEC 80000]
  • ISO 32:1977 Gas cylinders for medical use—Marking for identification of content
  • ISO 34 Rubber, vulcanized or thermoplastic—Determination of tear strength
    • ISO 34-1:2015 Part 1: Trouser, angle and crescent test pieces
    • ISO 34-2:2015 Part 2: Small (Delft) test pieces
  • ISO 35:2004 Natural rubber latex concentrate—Determination of mechanical stability
  • ISO 36:2017 Rubber, vulcanized or thermoplastic—Determination of adhesion to textile fabrics
  • ISO 37:2011 Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties
  • ISO 41:1980 Shipbuilding—Inland vessels—Covers for deck openings for pumps [withdrawn without replacement]
  • ISO 43:2016 Aircraft—Jacking pads
  • ISO 44:1975 Aerospace—Lever-operated, two-position, ON/OFF switches—Directions of operation
  • ISO 45:1990 Aircraft—Pressure refuelling connections
  • ISO 46:1973 Aircraft—Fuel nozzle grounding plugs and sockets
  • ISO 48:2010 Rubber, vulcanized or thermoplastic—Determination of hardness (hardness between 10 IRHD and 100 IRHD)
  • ISO 49:1994 Malleable cast iron fittings threaded to ISO 7-1
  • ISO 50:1977 Metal pipes—Steel sockets screwed according to ISO 7 [Withdrawn without replacement]
  • ISO 53:1998 Cylindrical gears for general and heavy engineering—Standard basic rack tooth profile
  • ISO 54:1996 Cylindrical gears for general engineering and for heavy engineering—Modules
  • ISO 55:1977 Seedlac—Specification [Withdrawn without replacement]
  • ISO 57:1975 Bleached lac—Specification [Withdrawn without replacement]
  • ISO 60:1977 Plastics—Determination of apparent density of material that can be poured from a specified funnel
  • ISO 61:1976 Plastics—Determination of apparent density of moulding material that cannot be poured from a specified funnel
  • ISO 62:2008 Plastics—Determination of water absorption
  • ISO 63:1975 Flat transmission belts—Lengths [Withdrawn: Replaced with ISO 22]
  • ISO 65:1981 Carbon steel tubes suitable for screwing in accordance with ISO 7-1
  • ISO 67:1981 Muscovite mica blocks, thins and films—Grading by size [Withdrawn without replacement]
  • ISO 68 ISO general-purpose screw threads – Basic profile
    • ISO 68-1:1998 Part 1: Metric screw threads
    • ISO 68-2:1998 Part 2: Inch screw threads
  • ISO 69:1998 Cinematography—16 mm motion-picture and magnetic film—Cutting and perforating dimensions
  • ISO 70:1981 Cinematography—35 mm negative photographic sound record on 35 mm motion-picture film—Position and maximum width dimensions
  • ISO 71:2014 Cinematography—16 mm negative photographic sound record on 16 mm, 35/16 mm and 35/32 mm motion-picture film—Positions and dimensions
  • ISO 74:1976 Cinematography—Image area produced by camera aperture and maximum projectable image area on 8 mm Type R motion-picture film—Positions and dimensions
  • ISO 75 Plastics—Determination of temperature of deflection under load
    • ISO 75-1:2013 Part 1: General test method
    • ISO 75-2:2013 Part 2: Plastics and ebonite
    • ISO 75-3:2004 Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics
  • ISO 76:2006 Rolling bearings—Static load ratings
  • ISO 78 Chemistry — Layouts for standards
    • ISO 78-2:1999 Chemistry—Layouts for standards—Part 2: Methods of chemical analysis
    • ISO 78-3:1983 Chemistry—Layouts for standards—Part 3: Standard for molecular absorption spectrometry [Withdrawn without replacement]
    • ISO 78-4:1983 Layouts for standards—Part 4: Standard for atomic absorption spectrometric analysis [Withdrawn without replacement]
  • ISO/TR 79:2015 Reference materials - Examples of reference materials for qualitative properties
  • ISO 82:1974 Steel—Tensile testing [Withdrawn: replaced with ISO 6892-1]
  • ISO 83:1976 Steel—Charpy impact test (U-notch) [Withdrawn: replaced with ISO 148-1]
  • ISO 86:1974 Steel—Tensile testing of sheet and strip less than 3 mm and not less than 0,5 mm thick [Withdrawn: replaced with ISO 6892-1]
  • ISO 89:1974 Steel—Tensile testing of wire [Withdrawn: replaced with ISO 6892-1]
  • ISO 90 Light gauge metal containers—Definitions and determination of dimensions and capacities
    • ISO 90-1:1997 Part 1: Open-top cans
    • ISO 90-2:1997 Part 2: General use containers
    • ISO 90-3:2000 Part 3: Aerosol cans
  • ISO 91:2017 Petroleum and related products - Temperature and pressure volume correction factors (petroleum measurement tables) and standard reference conditions
    • ISO 91-1:1992 Petroleum measurement tables—Part 1: Tables based on reference temperatures of 15 degrees C and 60 degrees F
    • ISO 91-2:1991 Petroleum measurement tables—Part 2: Tables based on a reference temperature of 20 degrees C
  • ISO 92:1976 Textile machinery and accessories—Spinning machinery—Definition of side (left or right)
  • ISO 93 Textile machinery and accessories—Cylindrical sliver cans
    • ISO 93-1:2006 Part 1: Main dimensions
    • ISO 93-2:2006 Part 2: Spring bottoms
  • ISO 94:1982 Textile machinery and accessories—Spindle gauges for ring-spinning and ring-doubling frames
  • ISO 96 Textile machinery and accessories—Rings and travellers for ring spinning and ring twisting frames
    • ISO 96-1:2016 Part 1: Flange rings T and SF and their travellers
    • ISO 96-2:2009 Part 2: HZ- and J-rings and their travellers
  • ISO 97:1975 Textile machinery and accessories—Rings for spinning, doubling and twisting for ear-shaped travellers [Withdrawn: replaced with ISO 96-2]
  • ISO 98:2001 Textile machinery and accessories—Spinning preparatory and spinning machinery—Main dimensions of coverings for top rollers

ISO 100 – ISO 199

  • ISO 100:1984 Pulleys for flat transmission belts—Crowns [Withdrawn: replaced with ISO 22]
  • ISO 102:1990 Aircraft—Gravity filling orifices
  • ISO 104:2015 Rolling bearings—Thrust bearings—Boundary dimensions, general plan
  • ISO 105 Textiles — Tests for colour fastness
    • ISO 105-A01:2010 Part A01: General principles of testing
    • ISO 105-A02:1993 Part A02: Grey scale for assessing change in colour
    • ISO 105-A03:1993 Part A03: Grey scale for assessing staining
    • ISO 105-A04:1989 Part A04: Method for the instrumental assessment of the degree of staining of adjacent fabrics
    • ISO 105-A05:1996 Part A05: Instrumental assessment of change in colour for determination of grey scale rating
    • ISO 105-A06:1995 Part A06: Instrumental determination of 1/1 standard depth of colour
    • ISO 105-A08:2001 Part A08: Vocabulary used in colour measurement
    • ISO 105-A11:2012 Part A11: Determination of colour fastness grades by digital imaging techniques
    • ISO 105-B01:2014 Part B01: Colour fastness to light: Daylight
    • ISO 105-B02:2014 Part B02: Colour fastness to artificial light: Xenon arc fading lamp test
    • ISO 105-B03:1994 Part B03: Colour fastness to weathering: Outdoor exposure
    • ISO 105-B04:1994 Part B04: Colour fastness to artificial weathering: Xenon arc fading lamp test
    • ISO 105-B05:1993 Part B05: Detection and assessment of photochromism
    • ISO 105-B06:1998 Part B06: Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test
    • ISO 105-B07:2009 Part B07: Colour fastness to light of textiles wetted with artificial perspiration
    • ISO 105-B08:1995 Part B08: Quality control of blue wool reference materials 1 to 7
    • ISO 105-B10:2011 Part B10: Artificial weathering—Exposure to filtered xenon-arc radiation
    • ISO 105-C06:2010 Part C06: Colour fastness to domestic and commercial laundering
    • ISO 105-C07:1999 Part C07: Colour fastness to wet scrubbing of pigment printed textiles
    • ISO 105-C08:2010 Part C08: Colour fastness to domestic and commercial laundering using a non-phosphate reference detergent incorporating a low-temperature bleach activator
    • ISO 105-C09:2001 Part C09: Colour fastness to domestic and commercial laundering—Oxidative bleach response using a non-phosphate reference detergent incorporating a low temperature bleach activator
    • ISO 105-C10:2006 Part C10: Colour fastness to washing with soap or soap and soda
    • ISO 105-C12:2004 Part C12: Colour fastness to industrial laundering
    • ISO 105-D01:2010 Part D01: Colour fastness to drycleaning using perchloroethylene solvent
    • ISO 105-D02:2016 Part D02: Colour fastness to rubbing: Organic solvents
    • ISO 105-E01:2013 Part E01: Colour fastness to water
    • ISO 105-E02:2013 Part E02: Colour fastness to sea water
    • ISO 105-E03:2010 Part E03: Colour fastness to chlorinated water (swimming-pool water)
    • ISO 105-E04:2013 Part E04: Colour fastness to perspiration
    • ISO 105-E05:2010 Part E05: Colour fastness to spotting: Acid
    • ISO 105-E06:2006 Part E06: Colour fastness to spotting: Alkali
    • ISO 105-E07:2010 Part E07: Colour fastness to spotting: Water
    • ISO 105-E08:1994 Part E08: Colour fastness to hot water
    • ISO 105-E09:2010 Part E09: Colour fastness to potting
    • ISO 105-E10:1994 Part E10: Colour fastness to decatizing
    • ISO 105-E11:1994 Part E11: Colour fastness to steaming
    • ISO 105-E12:2010 Part E12: Colour fastness to milling: Alkaline milling
    • ISO 105-E13:1994 Part E13: Colour fastness to acid-felting: Severe
    • ISO 105-E14:1994 Part E14: Colour fastness to acid-felting: Mild
    • ISO 105-E16:2006 Part E16: Colour fastness to water spotting on upholstery fabrics
    • ISO 105-F01:2001 Part F01: Specification for wool adjacent fabric
    • ISO 105-F02:2009 Part F02: Specification for cotton and viscose adjacent fabrics
    • ISO 105-F03:2001 Part F03: Specification for polyamide adjacent fabric
    • ISO 105-F04:2001 Part F04: Specification for polyester adjacent fabric
    • ISO 105-F05:2001 Part F05: Specification for acrylic adjacent fabric
    • ISO 105-F06:2000 Part F06: Specification for silk adjacent fabric
    • ISO 105-F07:2001 Part F07: Specification for secondary acetate adjacent fabric
    • ISO 105-F09:2009 Part F09: Specification for cotton rubbing cloth
    • ISO 105-F10:1989 Part F10: Specification for adjacent fabric: Multifibre
    • ISO 105-G01:2016 Part G01: Colour fastness to nitrogen oxides
    • ISO 105-G02:1993 Part G02: Colour fastness to burnt-gas fumes
    • ISO 105-G03:1993 Part G03: Colour fastness to ozone in the atmosphere
    • ISO 105-G04:2016 Part G04: Colour fastness to oxides of nitrogen in the atmosphere at high humidities
    • ISO 105-J01:1997 Part J01: General principles for measurement of surface colour
    • ISO 105-J02:1997 Part J02: Instrumental assessment of relative whiteness
    • ISO 105-J03:2009 Part J03: Calculation of colour differences
    • ISO 105-J05:2007 Part J05: Method for the instrumental assessment of the colour inconstancy of a specimen with change in illuminant (CMCCON02)
    • ISO 105-N01:1993 Part N01: Colour fastness to bleaching: Hypochlorite
    • ISO 105-N02:1993 Part N02: Colour fastness to bleaching: Peroxide
    • ISO 105-N03:1993 Part N03: Colour fastness to bleaching: Sodium chlorite (mild)
    • ISO 105-N04:1993 Part N04: Colour fastness to bleaching: Sodium chlorite (severe)
    • ISO 105-N05:1993 Part N05: Colour fastness to stoving
    • ISO 105-P01:1993 Part P01: Colour fastness to dry heat (excluding pressing)
    • ISO 105-P02:2002 Part P02: Colour fastness to pleating: Steam pleating
    • ISO 105-S01:1993 Part S01: Colour fastness to vulcanization: Hot air
    • ISO 105-S02:1993 Part S02: Colour fastness to vulcanization: Sulfur monochloride
    • ISO 105-S03:1993 Part S03: Colour fastness to vulcanization: Open steam
    • ISO 105-X01:1993 Part X01: Colour fastness to carbonizing: Aluminium chloride
    • ISO 105-X02:1993 Part X02: Colour fastness to carbonizing: Sulfuric acid
    • ISO 105-X04:1994 Part X04: Colour fastness to mercerizing
    • ISO 105-X05:1994 Part X05: Colour fastness to organic solvents
    • ISO 105-X06:1994 Part X06: Colour fastness to soda boiling
    • ISO 105-X07:1994 Part X07: Colour fastness to cross-dyeing: Wool
    • ISO 105-X08:1994 Part X08: Colour fastness to degumming
    • ISO 105-X09:1993 Part X09: Colour fastness to formaldehyde
    • ISO 105-X10:1993 Part X10: Assessment of migration of textile colours into polyvinyl chloride coatings
    • ISO 105-X11:1994 Part X11: Colour fastness to hot pressing
    • ISO 105-X12:2016 Part X12: Colour fastness to rubbing
    • ISO 105-X13:1994 Part X13: Colour fastness of wool dyes to processes using chemical means for creasing, pleating and setting
    • ISO 105-X14:1994 Part X14: Colour fastness to acid chlorination of wool: Sodium dichloroisocyanurate
    • ISO 105-X16:2016 Part X16: Colour fastness to rubbing—Small areas
    • ISO 105-X18:2007 Part X18: Assessment of the potential to phenolic yellowing of materials
    • ISO 105-Z01:1993 Part Z01: Colour fastness to metals in the dye-bath: Chromium salts
    • ISO 105-Z02:1993 Part Z02: Colour fastness to metals in the dye-bath: Iron and copper
    • ISO 105-Z03:1996 Part Z03: Intercompatibility of basic dyes for acrylic fibres
    • ISO 105-Z04:1995 Part Z04: Dispersibility of disperse dyes
    • ISO 105-Z05:1996 Part Z05: Determination of the dusting behaviour of dyes
    • ISO 105-Z06:1998 Part Z06: Evaluation of dye and pigment migration
    • ISO 105-Z07:1995 Part Z07: Determination of application solubility and solution stability of water-soluble dyes
    • ISO 105-Z08:1995 Part Z08: Determination of solubility and solution stability of reactive dyes in the presence of electrolytes
    • ISO 105-Z09:1995 Part Z09: Determination of cold water solubility of water-soluble dyes
    • ISO 105-Z10:1997 Part Z10: Determination of relative colour strength of dyes in solution
    • ISO 105-Z11:1998 Part Z11: Evaluation of speckiness of colorant dispersions
  • ISO 108:1976 Textile machinery and accessories—Weaving looms—Definition of left and right sides
  • ISO 109:1982 Textile machinery—Working widths of weaving machines
  • ISO 110:1978 Textile machinery and accessories—Cones for yarn winding (cross wound) -- Half angle of the cone 9 degrees 15' [Withdrawn without replacement]
  • ISO 111:1978 Textile machinery and accessories—Cones for yarn winding (cross wound) -- Half angle of the cone 4 degrees 20' [Withdrawn: Replaced with ISO 8489-3]
  • ISO 112:1983 Textile machinery and accessories—Cones for yarn winding (cross wound) -- Half angle of the cone 3 degrees 30' [Withdrawn: Replaced with ISO 8489-2]
  • ISO 113:2010 Rolling bearings—Plummer block housings—Boundary dimensions
  • ISO 114:1980 99.8 Unalloyed magnesium ingots—Chemical composition [Withdrawn: Replaced by ISO 8287]
  • ISO 115:2003 Unalloyed aluminium ingots for remelting—Classification and composition
  • ISO 119:1977 Plastics—Phenol-formaldehyde mouldings—Determination of free phenols—Iodometric method
  • ISO 120:1977 Plastics—Phenol-formaldehyde mouldings—Determination of free ammonia and ammonium compounds—Colorimetric comparison method
  • ISO 121:1980 Magnesium-aluminium-zinc alloy ingots and alloy castings—Chemical composition and mechanical properties of sand cast reference test bars [Withdrawn: replaced by ISO 16220]
  • ISO 123:2001 Rubber latex—Sampling
  • ISO 124:2014 Latex, rubber—Determination of total solids content
  • ISO 125:2011 Natural rubber latex concentrate—Determination of alkalinity
  • ISO 126:2005 Natural rubber latex concentrate—Determination of dry rubber content
  • ISO 127:2012 Rubber, natural latex concentrate—Determination of KOH number
  • ISO 128 Technical drawings—General principles of presentation
  • ISO 129
    • ISO 129-1:2004 Technical drawings—Indication of dimensions and tolerances—Part 1: General principles
    • ISO 129-4:2013 Technical product documentation (TPD)—Indication of dimensions and tolerances—Part 4: Dimensioning of shipbuilding drawings
  • ISO 131:1979 Acoustics—Expression of physical and subjective magnitudes of sound or noise in air [Withdrawn without replacement]
  • ISO 132:2017 Rubber, vulcanized or thermoplastic—Determination of flex cracking and crack growth (De Mattia)
  • ISO 133:1983 Rubber, vulcanized—Determination of crack growth (De Mattia) [Withdrawn: Replaced with ISO 132]
  • ISO 136:1972 Steel—Simple torsion testing of wire [Withdrawn replaced by ISO 7800]
  • ISO 137:2015 Wool—Determination of fibre diameter—Projection microscope method
  • ISO 139:2005 Textiles—Standard atmospheres for conditioning and testing
  • ISO 140 Acoustics—Measurement of sound insulation in buildings and of building elements
    • ISO 140-2:1991 Part 2: Determination, verification and application of precision data [Withdrawn: replaced by ISO 12999-1:2014]
    • ISO 140-4:1998 Part 4: Field measurements of airborne sound insulation between rooms [Withdrawn: replaced by ISO 16283-1:2014]
    • ISO 140-5:1998 Part 5: Field measurements of airborne sound insulation of façade elements and façades [Withdrawn: replaced by ISO 16283-1:2014]
    • ISO 140-7:1998 Part 7: Field measurements of impact sound insulation of floors [Withdrawn: replaced by ISO 16283-1:2014]
    • ISO 140-14:2004 Part 14: Guidelines for special situations in the field [Withdrawn: replaced by ISO 16283-1:2014]
      • ISO 140-14:2004/Cor 1:2007
    • ISO 140-18:2006 Part 18: Laboratory measurement of sound generated by rainfall on building elements [Withdrawn: replaced by ISO 10140-1:2016]
  • ISO 141:1976 Textile machinery and accessories—Pirn winders and cross winders—Definition of left and right sides
  • ISO 142:1976 Textile machinery and accessories—Weaving preparatory machines—Definition of left and right sides
  • ISO 143:1977 Textile machinery and accessories—Weft pirns for automatic looms [Withdrawn without replacement]
  • ISO 144:1973 Steel—Reverse bend testing of wire [Withdrawn: replaced with ISO 7801]
  • ISO 146:1984 Metallic materials—Hardness test—Verification of Vickers hardness testing machines HV 0,2 to HV 100 [Withdrawn replaced with ISO 6507-2]
    • ISO 146-2:1993 Metallic materials—Verification of Vickers hardness testing machines—Part 2: Less than HV 0,2 [Withdrawn replaced with ISO 6507-2]
  • ISO 148 Metallic materials—Charpy pendulum impact test
    • ISO 148-1:2016 Part 1: Test method
    • ISO 148-2:2016 Part 2: Verification of testing machines
    • ISO 148-3:2016 Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines
  • ISO 150:2006 Raw, refined and boiled linseed oil for paints and varnishes—Specifications and methods of test
  • ISO 155:1998 Belt drives—Pulleys—Limiting values for adjustment of centres
  • ISO 156:1982 Metallic materials—Hardness test—Verification of Brinell hardness testing machines [Withdrawn replaced by ISO 6506-2]
  • ISO 157:1996 Coal—Determination of forms of sulfur
  • ISO 160:1980 Asbestos-cement pressure pipes and joints [Withdrawn without replacement]
  • ISO 161 Thermoplastics pipes for the conveyance of fluids—Nominal outside diameters and nominal pressures
    • ISO 161-1:1996 Part 1: Metric series
    • ISO 161-2:1996 Part 2: Inch-based series
  • ISO 162:1985 Cinematography—Head gaps and sound records for three-, four-, or six-track magnetic sound records on 35 mm and single-track on 17,5 mm motion-picture film containing no picture—Positions and width dimensions
  • ISO 171:1980 Plastics—Determination of bulk factor of moulding materials
  • ISO 172:1978 Plastics—Phenol-formaldehyde mouldings—Detection of free ammonia
  • ISO 174:1974 Plastics—Homopolymer and copolymer resins of vinyl chloride—Determination of viscosity number in dilute solution [Withdrawn replaced by ISO 1628-2]
  • ISO 175:2010 Plastics—Methods of test for the determination of the effects of immersion in liquid chemicals
  • ISO 176:2005 Plastics—Determination of loss of plasticizers—Activated carbon method
  • ISO 177:2016 Plastics—Determination of migration of plasticizers
  • ISO 178:2010 Plastics—Determination of flexural properties
  • ISO 179 Plastics—Determination of Charpy impact properties
    • ISO 179-1:2010 Part 1: Non-instrumented impact test
    • ISO 179-2:1997 Part 2: Instrumented impact test
  • ISO 180:2000 Plastics—Determination of Izod impact strength
  • ISO 182 Plastics—Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures
    • ISO 182-1:1990 Part 1: Congo red method
    • ISO 182-2:1990 Part 2: pH method
    • ISO 182-3:1993 Part 3: Conductometric method
    • ISO 182-4:1993 Part 4: Potentiometric method
  • ISO 185:2005 Grey cast irons - Classification
  • ISO 186:2002 Paper and board - Sampling to determine average quality
  • ISO 187:1990 Paper, board and pulps - Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples
  • ISO 188:2011 Rubber, vulcanized or thermoplastic - Accelerated ageing and heat resistance tests
  • ISO 196:1978 Wrought copper and copper alloys - Detection of residual stress - Mercury(I) nitrate test
  • ISO 197 Copper and copper alloys - Terms and definitions
    • ISO 197-1:1983 Part 1: Materials
    • ISO 197-2:1983 Part 2: Unwrought products (Refinery shapes)
    • ISO 197-3:1983 Part 3: Wrought products
    • ISO 197-4:1983 Part 4: Castings
    • ISO 197-5:1980 Part 5: Methods of processing and treatment
  • ISO 199:2014 Rolling bearings - Thrust bearings - Geometrical product specification (GPS) and tolerance values

ISO 200 – ISO 999

  • ISO 204:2009 Metallic materials - Uniaxial creep testing in tension - Method of test
  • ISO 209:2007 Aluminium and aluminium alloys - Chemical composition
  • ISO/TS 211:2014 Essential oils - General rules for labelling and marking of containers
  • ISO 212:2007 Essential oils - Sampling
  • ISO 214:1976 Documentation - Abstracts for publications and documentation
  • ISO 215:1986 Documentation - Presentation of contributions to periodicals and other serials
  • ISO 216:2007 Writing paper and certain classes of printed matter – Trimmed sizes – A and B series, and indication of machine direction
  • ISO 217:2013 Paper - Untrimmed sizes - Designation and tolerances for primary and supplementary ranges, and indication of machine direction
  • ISO 225:2010 Fasteners - Bolts, screws, studs and nuts - Symbols and descriptions of dimensions
  • ISO 226:2003 Acoustics – Normal equal-loudness-level contours
  • ISO 228 Pipe threads where pressure-tight joints are not made on the threads
  • ISO 229:1973 Machine tools - Speeds and feeds
  • ISO 230 Test code for machine tools
    • ISO 230-1:2012 Part 1: Geometric accuracy of machines operating under no-load or quasi-static conditions
    • ISO 230-2:2014 Part 2: Determination of accuracy and repeatability of positioning of numerically controlled axes
    • ISO 230-3:2007 Part 3: Determination of thermal effects
    • ISO 230-4:2005 Part 4: Circular tests for numerically controlled machine tools
    • ISO 230-6:2002 Part 6: Determination of positioning accuracy on body and face diagonals (Diagonal displacement tests)
    • ISO 230-7:2015 Part 7: Geometric accuracy of axes of rotation
    • ISO/TR 230-8:2010 Part 8: Vibrations
    • ISO/TR 230-9:2005 Part 9: Estimation of measurement uncertainty for machine tool tests according to series ISO 230, basic equations
    • ISO 230-10:2016 Part 10: Determination of the measuring performance of probing systems of numerically controlled machine tools
  • ISO 233 Information and documentation – Transliteration of Arabic characters into Latin characters[Note 3]
  • ISO 234 Files and rasps
    • ISO 234-1:1983 Part 1: Dimensions
    • ISO 234-2:1982 Part 2: Characteristics of cut
  • ISO 235:2016 Parallel shank jobber and stub series drills and Morse taper shank drills
  • ISO 236
    • ISO 236-1:1976 Hand reamers
    • ISO 236-2:2013 Reamers - Part 2: Long fluted machine reamers with Morse taper shanks
  • ISO 237:1975 Rotating tools with parallel shanks - Diameters of shanks and sizes of driving squares
  • ISO 238:2016 Reduction sleeves and extension sockets for tools with Morse taper shanks
  • ISO 239:1999 Drill chuck tapers
  • ISO 240:2016 Milling cutters - Interchangeability dimensions for cutter arbors or cutter mandrels
  • ISO 241:1994 Shanks for turning and planing tools - Shapes and dimensions of the section
  • ISO 242:2014 Carbide tips for brazing on turning tools
  • ISO 243:2014 Turning tools with carbide tips - External tools
  • ISO 244:1979 Aircraft - Sealing wire
  • ISO 245:1998 Aerospace - Lockwire - Diameters
  • ISO 246:2007 Rolling bearings - Cylindrical roller bearings, separate thrust collars - Boundary dimensions
  • ISO 247:2006 Rubber - Determination of ash
  • ISO 248 Rubber, raw - Determination of volatile-matter content
    • ISO 248-1:2011 Part 1: Hot-mill method and oven method
    • ISO 248-2:2012 Part 2: Thermogravimetric methods using an automatic analyser with an infrared drying unit
  • ISO 249:2016 Rubber, raw natural - Determination of dirt content
  • ISO 251:2012 Conveyor belts with textile carcass - Widths and lengths
  • ISO 252:2007 Conveyor belts - Adhesion between constitutive elements - Test methods
  • ISO 254:2011 Belt drives - Pulleys - Quality, finish and balance
  • ISO 255:1990 Belt drives - Pulleys for V-belts (system based on datum width) - Geometrical inspection of grooves
  • ISO 257:2004 Pesticides and other agrochemicals - Principles for the selection of common names
  • ISO 259 Information and documentation – Transliteration of Hebrew characters into Latin characters[Note 3]
  • ISO 261:1998 ISO general purpose metric screw threads – General plan
  • ISO 262:1998 ISO general purpose metric screw threads – Selected sizes for screws, bolts and nuts
  • ISO 263:1973 ISO inch screw threads - General plan and selection for screws, bolts and nuts - Diameter range 0,06 to 6&nsbp;in
  • ISO 265 Pipes and fittings of plastics materials - Fittings for domestic and industrial waste pipes - Basic dimensions: Metric series
    • ISO 265-1:1988 Part 1: Unplasticized poly(vinyl chloride) (PVC-U)
  • ISO 266:1997 Acoustics - Preferred frequencies
  • ISO 268:1980 Aircraft - Mechanical and electromechanical indicators - General requirements
  • ISO 269:1985 Correspondence envelopes - Designation and sizes [Withdrawn without replacement]
  • ISO 272:1982 Fasteners - Hexagon products - Widths across flats
  • ISO 273:1979 Fasteners - Clearance holes for bolts and screws
  • ISO 276:2002 Binders for paints and varnishes - Linseed stand oil - Requirements and methods of test
  • ISO 277:2002 Binders for paints and varnishes - Raw tung oil - Requirements and methods of test
  • ISO 279:1998 Essential oils - Determination of relative density at 20 degrees C - Reference method
  • ISO 280:1998 Essential oils - Determination of refractive index
  • ISO 281:2007 Rolling bearings - Dynamic load ratings and rating life
  • ISO 282:1992 Conveyor belts - Sampling
  • ISO 283:2015 Textile conveyor belts - Full thickness tensile strength, elongation at break and elongation at the reference load - Test method
  • ISO 284:2012 Conveyor belts - Electrical conductivity - Specification and test method
  • ISO 286 Geometrical product specifications (GPS) – ISO code system for tolerances on linear sizes
    • ISO 286-1:2010 Part 1: Basis of tolerances, deviations and fits
    • ISO 286-2:2010 Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts
  • ISO 287:2009 Paper and board - Determination of moisture content of a lot - Oven-drying method
  • ISO 289 Rubber, unvulcanized - Determinations using a shearing-disc viscometer
    • ISO 289-1:2015 Part 1: Determination of Mooney viscosity
    • ISO 289-2:2016 Part 2: Determination of pre-vulcanization characteristics
    • ISO 289-3:2015 Part 3: Determination of the Delta Mooney value for non-pigmented, oil-extended emulsion-polymerized SBR
    • ISO 289-4:2003 Part 4: Determination of the Mooney stress-relaxation rate
  • ISO 291:2008 Plastics - Standard atmospheres for conditioning and testing
  • ISO 293:2004 Plastics - Compression moulding of test specimens of thermoplastic materials
  • ISO 294 Plastics - Injection moulding of test specimens of thermoplastic materials
    • ISO 294-1:2017 Part 1: General principles, and moulding of multipurpose and bar test specimens
    • ISO 294-2:1996 Part 2: Small tensile bars
    • ISO 294-3:2002 Part 3: Small plates
    • ISO 294-4:2001 Part 4: Determination of moulding shrinkage
    • ISO 294-5:2011 Part 5: Preparation of standard specimens for investigating anisotropy
  • ISO 295:2004 Plastics - Compression moulding of test specimens of thermosetting materials
  • ISO 296:1991 Machine tools - Self-holding tapers for tool shanks
  • ISO 297:1988 7/24 tapers for tool shanks for manual changing
  • ISO 298:1973 Machine tools - Lathe centres - Sizes for interchangeability
  • ISO 299:1987 Machine tool tables - T-slots and corresponding bolts
  • ISO 302:2015 Pulps - Determination of Kappa number
  • ISO 306:2013 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST)
  • ISO 361 Basic ionizing radiation symbol
  • ISO 428:1983 Wrought copper-aluminium alloys - Chemical composition and forms of wrought products [Withdrawn without replacement]
  • ISO 500 Agricultural tractors – Rear-mounted power take-off types 1, 2 and 3
  • ISO 518:2006 Photography – Camera accessory shoes, with and without electrical contacts, for photoflash lamps and electronic photoflash units – Specification
  • ISO 519:1992 Photography – Hand-held cameras – Flash-connector dimensions
  • ISO 536:2012 Paper and board – Determination of grammage
  • ISO 639 Codes for the representation of names of languages
    • ISO 639-1:2002 Alpha-2 code
    • ISO 639-2:1998 Alpha-3 code
    • ISO 639-3:2007 Alpha-3 code for comprehensive coverage of languages
    • ISO 639-4:2010 General principles of coding of the representation of names of languages and related entities, and application guidelines
    • ISO 639-5:2008 Alpha-3 code for language families and groups
    • ISO 639-6:2009 Alpha-4 code for comprehensive coverage of language variants [Withdrawn, no replacement]
  • ISO/IEC 646:1991 Information technology – ISO 7-bit coded character set for information interchange
  • ISO 657 Hot-rolled steel sections
  • ISO 663:2017 Animal and vegetable fats and oils - Determination of insoluble impurities content
  • ISO 668 Series 1 freight containers – Classification, dimensions and ratings
  • ISO 690 Information and documentation – Guidelines for bibliographic references and citations to information resources
  • ISO 704 Terminology work – Principles and methods
  • ISO 732 Photography – 120-size and 220-size films – Dimensions
  • ISO 760:1978 Determination of water - Karl Fischer method (General method)
  • ISO 764 Horology – Magnetic resistant watches
  • ISO 787 General methods of test for pigments and extenders
    • ISO 787-9:1981 Determination of pH value of an aqueous suspension
  • ISO 838 Paper – Holes for general filing purposes – Specifications
  • ISO 843:1997 Information and documentation – Conversion of Greek characters into Latin characters
  • ISO 860 Terminology work – Harmonization of concepts and terms
  • ISO 898 Mechanical properties of fasteners made of carbon steel and alloy steel[Note 3]
  • ISO 928 Spices and condiments - Determination of total ash
  • ISO 936 Meat and meat products - Determination of total ash
  • ISO 962:1974 Information processing - Implementation of the 7- bit coded character set and its 7- bit and 8-bit extensions on 9- track 12,7 mm (0.5 in) magnetic tape
  • ISO 965 ISO general purpose metric screw threads – Tolerances
  • ISO 999 Information and documentation – Guidelines for the content, organization, and presentation of indexes

ISO 1000 – ISO 4999

  • ISO 1000 SI units and recommendations for the use of their multiples and of certain other units [withdrawn 2009-11-17]
  • ISO 1004 Information processing – Magnetic ink character recognition – Print specifications
  • ISO 1007 Photography – 135-size film and magazine – Specifications
  • ISO 1034:1973 Aircraft - Ground air-conditioning connections
  • ISO 1073 Alphanumeric character sets for optical recognition
    • ISO 1073-1:1976 Part 1: Character set OCR-A - Shapes and dimensions of the printed image
    • ISO 1073-2:1976 Part 2: Character set OCR-B - Shapes and dimensions of the printed image
  • ISO 1101 Geometrical product specifications (GPS) – Geometrical tolerancing – Tolerances of form, orientation, location and run-out
  • ISO 1113:1979 Information processing - Representation of the 7- bit coded character set on punched tape
  • ISO 1182 Reaction to fire tests for products—Non-combustibility test
  • ISO 1217 Displacement compressors—Acceptance tests
  • ISO 1222 Photography – Tripod connections
  • ISO 1268 Fibre-reinforced plastics – Methods of producing test plates
  • ISO 1302:2002 Geometrical Product Specifications (GPS) - Indication of surface texture in technical product documentation
  • ISO 1402 Rubber and plastics hoses and hose assemblies - Hydrostatic testing
  • ISO 1413:2016 Horology - Shock-resistant wrist watches
  • ISO 1538:1984 Programming languages - ALGOL 60
  • ISO/IEC 1539 Information technology – Programming languages – Fortran
    • ISO/IEC 1539-1:2010 Part 1: Base language
    • ISO/IEC 1539-2:2000 Part 2: Varying length character strings
  • ISO 1629 Rubber and latices – Nomenclature
  • ISO 1660:2017 Geometrical product specifications (GPS) - Geometrical tolerancing - Profile tolerancing
  • ISO 1663 Rigid cellular plastics – Determination of water vapour transmission properties
  • ISO 1745 Information processing – Basic mode control procedures for data communication systems
  • ISO 1750 Pesticides and other agrochemicals – Common names
  • ISO 1928 Solid mineral fuels – Determination of gross calorific value by the bomb calorimetric method and calculation of net calorific value
  • ISO/IEC 1989:2014 Information technology - Programming languages, their environments and system software interfaces - Programming language COBOL
  • ISO 2014:1976 Writing of calendar dates in all-numeric form [Withdrawn: replaced by ISO 8601:1988]
  • ISO 2015:1976 Numbering of weeks [Withdrawn: replaced by ISO 8601:1988]
  • ISO/IEC 2022:1994 Information technology – Character code structure and extension techniques
  • ISO 2033:1983 Information processing - Coding of machine readable characters (MICR and OCR)
  • ISO 2047:1975 Information processing - Graphical representations for the control characters of the 7- bit coded character set
  • ISO 2108 Information and documentation – International standard book number (ISBN)
  • ISO 2145 Documentation – Numbering of divisions and subdivisions in written documents
  • ISO 2146:2010 Information and documentation - Registry services for libraries and related organizations
  • ISO 2162 Technical product documentation – Springs
    • ISO 2162-1 Simplified representation
    • ISO 2162-2 Presentation of data for cylindrical helical compression springs
  • ISO 2171 Cereals, pulses and by-products – Determination of ash yield by incineration
  • ISO 2240:2003 Photography – Colour reversal camera films – Determination of ISO speed
  • ISO 2281:1990 Horology - Water-resistant watches [Withdrawn: replaced by ISO 22810:2010]
  • ISO/IEC 2375:2003 Information technology - Procedure for registration of escape sequences and coded character sets
  • ISO 2848:1984 Building construction - Modular coordination - Principles and rules
  • ISO 2533 Standard Atmosphere
  • ISO 2692 Geometrical product specifications (GPS) – Geometrical tolerancing – Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)
  • ISO 2709:2008 Information and documentation – Format for information exchange
  • ISO 2711:1973 Information processing interchange - Representation of ordinal dates
  • ISO 2768 General tolerances
    • ISO 2768-1 Tolerances for linear and angular dimensions without individual tolerance indications
    • ISO 2768-2 Geometrical tolerances for features without individual tolerance indications
  • ISO 2788:1986 Documentation - Guidelines for the establishment and development of monolingual thesauri [Withdrawn: replaced by ISO 25964-1:2011]
  • ISO 2848:1984 Building construction - Modular coordination - Principles and rules
  • ISO 2852 Stainless steel clamp pipe couplings for the food industry
  • ISO 3002 Basic quantities in cutting and grinding
  • ISO 3029:1995 Photography - 126-size cartridges - Dimensions of cartridge, film and backing paper [Withdrawn without replacement]
  • ISO 3082 Iron ores – Sampling and sample preparation procedures
  • ISO 3098 Technical product documentation – Lettering
  • ISO 3103 Tea – Preparation of liquor for use in sensory tests
  • ISO 3166 Codes for the representation of names of countries and their subdivisions
  • ISO 3275:1974 Information processing - Implementation of the 7- bit coded character set and its 7- bit and 8- bit extensions on 3,81 mm magnetic cassette for data interchange
  • ISO 3297 Information and documentation – International standard serial number (ISSN)
  • ISO 3307:1975 Information interchange - Representations of time of the day [Withdrawn: replaced by ISO 8601:1988]
  • ISO 3394 Dimensions of rigid rectangular packages – Transport packages
  • ISO 3506 Mechanical properties of corrosion-resistant stainless steel fasteners
  • ISO 3534 Statistics – Vocabulary and symbols
    • ISO 3534-1 General statistical terms and terms used in probability
    • ISO 3534-2 Applied statistics
    • ISO 3534-3 Design of experiments
    • ISO 3534-4 Survey sampling
  • ISO 3535:1977 Forms design sheet and layout chart
  • ISO 3536 Road vehicles – Safety glazing materials – Vocabulary
  • ISO 3537 Road vehicles – Safety glazing materials – Mechanical tests
  • ISO 3538 Road vehicles – Safety glazing materials – Test methods for optical properties
  • ISO 3591 - Sensory analysis – Apparatus – Wine-tasting glass
  • ISO 3593 Starch — Determination of ash
  • ISO 3601 Fluid power systems – O-rings
    • ISO 3601-1 Inside diameters, cross-sections, tolerances and designation codes
    • ISO 3601-2 Housing dimensions for general applications
    • ISO 3601-3 Quality acceptance criteria
    • ISO 3601-4 Anti-extrusion rings (back-up rings)
    • ISO 3601-5 Suitability of elastomeric materials for industrial applications
  • ISO 3602:1989 Documentation – Romanization of Japanese (kana script)
  • ISO 3632 Spices – Saffron (Crocus sativus L.)[Note 3]
  • ISO 3635:1981 Size designation of clothes – Definitions and body measurement procedure
  • ISO 3676 Packaging – Unit load sizes – Dimensions
  • ISO 3690 Welding and allied processes — Determination of hydrogen content in arc weld metal
  • ISO 3713:1987 Ferroalloys - Sampling and preparation of samples - General rules
  • ISO 3864 Graphical symbols – Safety colours and safety signs
  • ISO 3901 Information and documentation – International Standard Recording Code (ISRC)
  • ISO 3977 Gas turbines – Procurement
  • ISO 4031:1978 Information interchange - Representation of local time differentials [Withdrawn: replaced by ISO 8601:1988]
  • ISO 4074 Natural latex rubber condoms – Requirements and test methods
  • ISO 4139:1979 Ferrosilicon - Determination of aluminium content - Flame atomic absorption spectrometric method
  • ISO 4140:1979 Ferrochromium and ferrosilicochromium - Determination of chromium content - Potentiometric method
  • ISO 4157 Construction drawings – Designation systems
  • ISO 4158:1978 Ferrosilicon, ferrosilicomanganese and ferrosilicochromium - Determination of silicon content - Gravimetric method
  • ISO 4159:1978 Ferromanganese and ferrosilicomanganese - Determination of manganese content - Potentiometric method
  • ISO 4165 Road vehicles — Electrical connections — Double-pole connection
  • ISO 4173:1980 Ferromolybdenum - Determination of molybdenum content - Gravimetric method
  • ISO 4179 Ductile iron pipes and fittings for pressure and non-pressure pipelines – Cement mortar lining
  • ISO 4217 Codes for the representation of currencies and funds
  • ISO 4287:1997 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters
  • ISO 4288:1996 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Rules and procedures for the assessment of surface texture
  • ISO 4291:1985 Methods for the assessement of departure from roundness - Measurement of variations in radius
  • ISO 4314 Surface active agents — Determination of free alkalinity or free acidity — Titrimetric method
  • ISO 4346:1977 Steel wire ropes for general purposes - Lubricants - Basic requirements
  • ISO 4551:1987 Ferroalloys - Sampling and sieve analysis
  • ISO 4552 Ferroalloys - Sampling and sample preparation for chemical analysis
  • ISO 4578 Adhesives — Determination of peel resistance of high-strength adhesive bonds — Floating-roller method
  • ISO 4582 Plastics — Determination of changes in colour and variations in properties after exposure to daylight under glass, natural weathering or laboratory light sources
  • ISO 4587 Adhesives — Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies
  • ISO 4628 Paints and varnishes – Evaluation of degradation of coatings – Designation of quantity and size of defects, and of intensity of uniform changes in appearance
    • ISO 4628-1 General introduction and designation system
    • ISO 4628-2 Assessment of degree of blistering
    • ISO 4628-3 Assessment of degree of rusting
    • ISO 4628-4 Assessment of degree of cracking
    • ISO 4628-5 Assessment of degree of flaking
    • ISO 4628-6 Assessment of degree of chalking by tape method
    • ISO 4628-7 Assessment of degree of chalking by velvet method
    • ISO 4628-8 Assessment of degree of delamination and corrosion around a scribe
    • ISO 4628-10 Assessment of degree of filiform corrosion
  • ISO 4730:2017 Essential oil of Melaleuca, terpinen-4-ol type (Tea Tree oil)
  • ISO/IEC 4873:1991 Information technology – ISO 8-bit code for information interchange – Structure and rules for implementation
  • ISO 4892 Plastics – Methods of exposure to laboratory light sources
  • ISO/IEC 4909:2006 Identification cards - Financial transaction cards - Magnetic stripe data content for track 3

ISO 5000 – ISO 8999

  • ISO 5006:2017 Earth-moving machinery - Operator's field of view - Test method and performance criteria
  • ISO 5127:2017 Information and documentation - Foundation and vocabulary
  • ISO 5167 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full
    • ISO 5167-1 General principles and requirements
    • ISO 5167-2 Orifice plates
    • ISO 5167-3 Nozzles and Venturi nozzles
    • ISO 5167-4 Venturi tubes
  • ISO 5211:2017 Industrial valves - Part-turn actuator attachments
  • ISO/IEC 5218 Information technology – Codes for the representation of human sexes
  • ISO 5426:1983 Extension of the Latin alphabet coded character set for bibliographic information interchange
    • ISO 5426-2:1996 Information and documentation - Extension of the Latin alphabet coded character set for bibliographic information interchange - Part 2: Latin characters used in minor European languages and obsolete typography
  • ISO 5427:1984 Extension of the Cyrillic alphabet coded character set for bibliographic information interchange
  • ISO 5428:1984 Greek alphabet coded character set for bibliographic information interchange
  • ISO 5445:1980 Ferrosilicon - Specification and conditions of delivery
  • ISO 5446:2017 Ferromanganese - Specification and conditions of delivery
  • ISO 5447:1980 Ferrosilicomanganese - Specification and conditions of delivery
  • ISO 5448:1981 Ferrochromium - Specification and conditions of delivery
  • ISO 5449:1980 Ferrosilicochromium - Specification and conditions of delivery
  • ISO 5450:1980 Ferrotungsten - Specification and conditions of delivery
  • ISO 5451:1980 Ferrovanadium - Specification and conditions of delivery
  • ISO 5452:1980 Ferromolybdenum - Specification and conditions of delivery
  • ISO 5453:1980 Ferroniobium - Specification and conditions of delivery
  • ISO 5454:1980 Ferrotitanium - Specification and conditions of delivery
  • ISO 5455 Technical drawings – Scales
  • ISO 5457 Technical product documentation – Sizes and layout of drawing sheets
  • ISO 5458 Geometrical Product Specifications (GPS) – Geometrical tolerancing – Positional tolerancing
  • ISO 5459 Geometrical product specifications (GPS) – Geometrical tolerancing – Datums and datum systems
  • ISO 5660 Reaction-to-fire tests – Heat release, smoke production and mass loss rate
    • ISO 5660-1 Heat release rate (cone calorimeter method)
    • ISO 5660-2 Smoke production rate (dynamic measurement)
    • ISO/TS 5660-3 Guidance on measurement
  • ISO 5659 Plastics - Smoke generation
    • ISO 5659-1:1996 Part 1: Guidance on optical-density testing [Withdrawn: replaced by ISO 5659-2:2012]
    • ISO 5659-2:2017 Part 2: Determination of optical density by a single-chamber test
    • ISO/TR 5659-3:1999 Part 3: Determination of optical density by a dynamic-flow method [Withdrawn, no replacement]
  • ISO 5725 Accuracy (trueness and precision) of measurement methods and results
  • ISO 5775 Bicycle tires and rims
  • ISO 5776 Graphic technology - Symbols for text correction
  • ISO 5800:2001 Photography – Colour negative films for still photography – Determination of ISO speed
  • ISO 5806:1984 Information processing - Specification of single-hit decision tables
  • ISO 5807:1985 Information processing - Documentation symbols and conventions for data, program and system flowcharts, program network charts and system resources charts
  • ISO 5893 Rubber and plastics test equipment – Tensile, flexural and compression types (constant rate of traverse) – Specification
  • ISO 5964 Documentation – Guidelines for the establishment and development of multilingual thesauri
  • ISO 5971:1981 Size designation of clothes – Pantyhose
  • ISO 5993 Sodium hydroxide for industrial use—Determination of mercury content—Flameless atomic absorption spectrometric method
  • ISO 6093:1985 Information processing - Representation of numerical values in character strings for information interchange
  • ISO 6107-4:1993 Water quality—Vocabulary
  • ISO 6160:1979 Programming languages - PL/1
  • ISO 6166 Securities and related financial instruments – International securities identification numbering system (ISIN)
  • ISO 6194 Rotary-shaft lip-type seals incorporating elastomeric sealing elements
    • ISO 6194-5 Identification of visual imperfections
  • ISO 6336 Calculation of load capacity of spur and helical gears
  • ISO 6344 Coated abrasives – Grain size analysis
  • ISO 6346 Freight containers – Coding, identification and marking
  • ISO 6352:1985 Ferronickel - Determination of nickel content - Dimethylglyoxime gravimetric method
  • ISO 6357 Documentation – Spine titles on books and other publications
  • ISO 6385:2016 Ergonomics principles in the design of work systems
  • ISO 6425:1996 Divers' watches
  • ISO/IEC 6429:1992 Information technology – Control functions for coded character sets
  • ISO 6438:1983 Documentation – African coded character set for bibliographic information interchange
  • ISO 6467:1980 Ferrovanadium - Determination of vanadium content - Potentiometric method
  • ISO 6501:1988 Ferronickel - Specification and delivery requirements
  • ISO/IEC 6522:1992 Information technology - Programming languages - PL/1 general purpose subset
  • ISO/IEC 6523 Information technology – Structure for the identification of organizations and organization parts
  • ISO 6579 Microbiology of food and animal feeding stuffs – Horizontal method for the detection of Salmonella spp.
  • ISO 6586:1980 Data processing - Implementation of the ISO 7- bit and 8- bit coded character sets on punched cards
  • ISO 6594 Cast iron drainage pipes and fittings – Spigot series
  • ISO 6630:1986 Documentation - Bibliographic control characters
  • ISO 6709 Standard representation of geographic point location by coordinates
  • ISO 6780 Flat pallets for intercontinental materials handling — Principal dimensions and tolerances
  • ISO 6861:1996 Information and documentation - Glagolitic alphabet coded character set for bibliographic information interchange
  • ISO 6862:1996 Information and documentation - Mathematical coded character set for bibliographic information interchange
  • ISO 6883:2017 Animal and vegetable fats and oils - Determination of conventional mass per volume (litre weight in air)
  • ISO 6887 Microbiology of the food chain - Preparation of test samples, initial suspension and decimal dilutions for microbiological examination
    • ISO 6887-1:2017 Part 1: General rules for the preparation of the initial suspension and decimal dilutions
    • ISO 6887-2:2017 Part 2: Specific rules for the preparation of meat and meat products
    • ISO 6887-3:2017 Part 3: Specific rules for the preparation of fish and fishery products
    • ISO 6887-4:2017 Part 4: Specific rules for the preparation of miscellaneous products
    • ISO 6887-5:2010 Microbiology of food and animal feeding stuffs - Preparation of test samples, initial suspension and decimal dilutions for microbiological examination - Part 5: Specific rules for the preparation of milk and milk products
    • ISO 6887-6:2013 Microbiology of food and animal feed - Preparation of test samples, initial suspension and decimal dilutions for microbiological examination - Part 6: Specific rules for the preparation of samples taken at the primary production stage
  • ISO 6892 Metallic materials – Tensile testing
    • ISO 6892-1 Method of test at room temperature
    • ISO 6892-2 Method of test at elevated temperature
    • ISO 6892-3 Method of test at low temperature
    • ISO 6892-4 Method of test in liquid helium
  • ISO 6936:1988 Information processing - Conversion between the two coded character sets of ISO 646 and ISO 6937-2 and the CCITT international telegraph alphabet No. 2 (ITA 2)
  • ISO/IEC 6937:2001 Information technology - Coded graphic character set for text communication - Latin alphabet
  • ISO 6946 Building components and building elements – Thermal resistance and thermal transmittance – Calculation method
  • ISO 7001 Graphical symbols – Public information symbols
  • ISO 7002 Agricultural food products – Layout for a standard method of sampling from a lot
  • ISO 7029:2017 Acoustics - Statistical distribution of hearing thresholds related to age and gender
  • ISO 7087:1984 Ferroalloys - Experimental methods for the evaluation of the quality variation and methods for checking the precision of sampling
  • ISO 7098:2015 Information and documentation – Romanization of Chinese
  • ISO 7185:1990 Information technology - Programming languages - Pascal
  • ISO 7200 Technical product documentation – Data fields in title blocks and document headers
  • ISO 7240 Fire detection and alarm systems
  • ISO 7347:1987 Ferroalloys - Experimental methods for checking the bias of sampling and sample preparation
  • ISO/IEC 7350:1991 Information technology - Registration of repertoires of graphic characters from ISO/IEC 10367
  • ISO 7372 Trade data interchange
  • ISO 7373:1987 Ferroalloys - Experimental methods for checking the precision of sample division
  • ISO/IEC 7498 Information technology -- Open Systems Interconnection — Basic Reference Model[Note 3]
    • ISO/IEC 7498-1 Information technology—Open Systems Interconnection—Basic Reference Model: The Basic Model
    • ISO 7498-2 Information processing systems—Open Systems Interconnection—Basic Reference Model—Part 2: Security Architecture
    • ISO/IEC 7498-3 Information technology—Open Systems Interconnection—Basic Reference Model: Naming and addressing
  • ISO/IEC 7501 Identification cards – Machine readable travel documents
  • ISO 7520:1985 Ferronickel - Determination of cobalt content - Flame atomic absorption spectrometric method
  • ISO 7524:1985 Nickel, ferronickel and nickel alloys - Determination of carbon content - Infra-red absorption method after induction furnace combustion
  • ISO 7526:1985 Nickel, ferronickel and nickel alloys - Determination of sulfur content - Infra-red absorption method after induction furnace combustion
  • ISO 7527:1985 Nickel, ferronickel and nickel alloys - Determination of sulfur content - Iodimetric titration method after induction furnace combustion
  • ISO 7692:1983 Ferrotitanium - Determination of titanium content - Titrimetric method
  • ISO 7693:1984 Ferrotungsten - Determination of tungsten content - Cinchonine gravimetric method
  • ISO 7736 Road vehicles – Car radio for front installation – Installation space including connections
  • ISO/IEC 7810 Identification cards – Physical characteristics
  • ISO/IEC 7811 Identification cards – Recording technique
  • ISO/IEC 7812 Identification cards – Identification of issuers
  • ISO/IEC 7813 Information technology – Identification cards – Financial transaction cards
  • ISO/IEC 7816 Identification cards – Integrated circuit cards[Note 3]
  • ISO/IEC 7942 Information technology – Computer graphics and image processing – Graphical Kernel System (GKS)
  • ISO 8000 Data quality
  • ISO 8015:2011 Geometrical product specifications (GPS) – Fundamentals – Concepts, principles and rules
  • ISO 8041:2005 Human response to vibration - Measuring instrumentation
    • ISO 8041-1:2017 Part 1: General purpose vibration meters
  • ISO 8049:2016 Ferronickel shot - Sampling for analysis
  • ISO 8050:1988 Ferronickel ingots or pieces - Sampling for analysis
  • ISO 8090 Cycles – Terminology
  • ISO 8178 Reciprocating internal combustion engines - Exhaust emission measurement
  • ISO 8180 Ductile iron pipelines – Polyethylene sleeving for site application
  • ISO/IEC 8211:1994 Information technology - Specification for a data descriptive file for information interchange
  • ISO 8217:2017 Petroleum products - Fuels (class F) - Specifications of marine fuels
  • ISO 8343:1985 Ferronickel - Determination of silicon content - Gravimetric method
  • ISO 8373 Manipulating industrial robots – Vocabulary
  • ISO 8485:1989 Programming languages - APL
  • ISO 8501 Preparation of steel substrates before application of paints and related products – Visual assessment of surface cleanliness
  • ISO 8559:1989 Garment construction and anthropometric surveys – Body dimensions [Withdrawn: replaced by ISO 8559-1:2017]
  • ISO 8559 Size designation of clothes
    • ISO 8559-1:2017 Part 1: Anthropometric definitions for body measurement
    • ISO 8559-2:2017 Part 2: Primary and secondary dimension indicators
  • ISO 8571 Information processing systems - Open Systems Interconnection - File Transfer, Access and Management
    • ISO 8571-1:1988 Part 1: General introduction
    • ISO 8571-2:1988 Part 2: Virtual Filestore Definition
    • ISO 8571-3:1988 Part 3: File Service Definition
    • ISO 8571-4:1988 Part 4: File Protocol Specification
    • ISO/IEC 8571-5:1990 Part 5: Protocol Implementation Conformance Statement Proforma
  • ISO 8573 Compressed air
    • ISO 8573-1:2010 Contaminants and purity classes
    • ISO 8573-2:2007 Test methods for oil aerosol content
    • ISO 8573-3:1999 Test methods for measurement of humidity
    • ISO 8573-4:2001 Test methods for solid particle content
    • ISO 8573-5:2001 Test methods for oil vapour and organic solvent content
    • ISO 8573-6:2003 Test methods for gaseous contaminant content
    • ISO 8573-7:2003 Test method for viable microbiological contaminant content
    • ISO 8573-8:2004 Test methods for solid particle content by mass concentration
    • ISO 8573-9:2004 Test methods for liquid water content
  • ISO 8583 Financial transaction card originated messages – Interchange message specifications
    • ISO 8583-1 Messages, data elements and code values
    • ISO 8583-2 Application and registration procedures for Institution Identification Codes (IIC)
    • ISO 8583-3 Maintenance procedures for messages, data elements and code values
  • ISO 8601 Data elements and interchange formats – Information interchange – Representation of dates and times
  • ISO/IEC 8613 Information technology – Open Document Architecture (ODA) and interchange format
  • ISO/IEC 8631:1989 Information technology - Program constructs and conventions for their representation
  • ISO/IEC 8632 Information technology – Computer graphics – Metafile for the storage and transfer of picture description information
    • ISO/IEC 8632-1:1999 Part 1: Functional specification
    • ISO/IEC 8632-2:1992 Part 2: Character encoding [withdrawn 2001-06-21]
    • ISO/IEC 8632-3:1999 Part 3: Binary encoding
    • ISO/IEC 8632-4:1999 Part 4: Clear text encoding
  • ISO 8651 Information technology – Computer graphics – Graphical Kernel System (GKS) language bindings[Note 3]
    • ISO 8651-1:1988 Part 1: FORTRAN
    • ISO 8651-2:1988 Part 2: Pascal
    • ISO 8651-3:1988 Part 3: Ada
    • ISO/IEC 8651-4:1995 Part 4: C
  • ISO/IEC 8652:2012 Information technology – Programming languages – Ada
  • ISO 8653:1986 JewelleryRing-sizes – Definition, measurement and designation
  • ISO 8691 Petroleum products – Low levels of vanadium in liquid fuels – Determination by flameless atomic absorption spectrometry after ashing
  • ISO 8785:1998 Geometrical Product Specification (GPS) - Surface imperfections - Terms, definitions and parameters
  • ISO 8790:1987 Information processing systems - Computer system configuration diagram symbols and conventions
  • ISO 8805 Information processing systems – Computer graphics – Graphical Kernel System for Three Dimensions (GKS-3D) functional description
  • ISO/IEEC 8806 Information technology – Computer graphics – Graphical Kernel System for Three Dimensions (GKS-3D) language bindings
    • ISO/IEEC 8806-4 Part 4: C
  • ISO 8807:1989 Information processing systems – Open Systems Interconnection – LOTOS – A formal description technique based on the temporal ordering of observational behaviour
  • ISO/IEC 8824 Information technology – Abstract Syntax Notation One (ASN.1)
  • ISO/IEC 8825 Information technology – ASN.1 encoding rules
  • ISO/IEC 8859 Information technology – 8-bit single-byte coded graphic character sets
  • ISO 8879 Information processing – Text and office systems – Standard Generalized Markup Language (SGML)
  • ISO 8936:2017 Awnings for leisure accommodation vehicles - Requirements and test methods
  • ISO 8954 Ferroalloys - Vocabulary
    • ISO 8954-1:1990 Part 1: Materials
    • ISO 8954-2:1990 Part 2: Sampling and sample preparation
    • ISO 8954-3:1990 Part 3: Sieve analysis
  • ISO 8957:1996 Information and documentation - Hebrew alphabet coded character sets for bibliographic information interchange

ISO 9000 – ISO 9999

  • ISO 9000 Quality management systems – Fundamentals and vocabulary
  • ISO 9001 Quality management systems – Requirements
  • ISO 9004 Managing for the sustained success of an organization – A quality management approach
  • ISO 9022 Optics and optical instruments -- Environmental test methods
    • ISO 9022-1:2016 Definitions, extent of testing
    • ISO 9022-2:2015 Cold, heat and humidity
    • ISO 9022-3:2015 Mechanical stress
    • ISO 9022-4:2014 Salt mist
    • ISO 9022-5:1994 Combined cold, low air pressure [Withdrawn: replaced by ISO 9022-23:2016]
    • ISO 9022-6:2015 Dust
    • ISO 9022-23:2016 Low pressure combined with cold, ambient temperature and dry or damp heat
  • ISO 9036:1987 Information processing - Arabic 7-bit coded character set for information interchange
  • ISO 9050 Glass in building – Determination of light transmittance, solar direct transmittance, total solar energy transmittance, ultraviolet transmittance and related glazing factors
  • ISO 9069 Information processing – SGML support facilities – SGML Document Interchange Format (SDIF)
  • ISO/IEC 9075 Information technology – Database languages – SQL
  • ISO/IEC 9126 Software engineering – Product quality
  • ISO 9141 Road vehicles – Diagnostic systems[Note 3]
    • ISO 9141-2 CARB requirements for interchange of digital information
    • ISO 9141-3 Verification of the communication between vehicle and OBD II scan tool
  • ISO 9223 Corrosion of metals and alloys - Corrosivity of atmospheres - Classification, determination and estimation
  • ISO 9224 Corrosion of metals and alloys - Corrosivity of atmospheres - Guiding values for the corrosivity categories
  • ISO 9225 Corrosion of metals and alloys - Corrosivity of atmospheres - Measurement of environmental parameters affecting corrosivity of atmospheres
  • ISO 9226 Corrosion of metals and alloys - Corrosivity of atmospheres - Determination of corrosion rate of standard specimens for the evaluation of corrosivity
  • ISO 9227:2017 Corrosion tests in artificial atmospheres -- Salt spray tests
  • ISO 9241 Ergonomics of human-system interaction
  • ISO/IEC 9281 Information technology - Picture coding methods
    • ISO/IEC 9281-1:1990 Part 1: Identification
    • ISO/IEC 9281-2:1990 Part 2: Procedure for registration
  • ISO/IEC 9282 Information processing - Coded representation of pictures
    • ISO/IEC 9282-1:1988 Part 1: Encoding principles for picture representation in a 7-bit or 8-bit environment
  • ISO/IEC 9293 Information technology – Volume and file structure of disk cartridges for information interchange
  • ISO 9362 Banking – Banking telecommunication messages – Business identifier code (BIC)
  • ISO 9407 Shoe sizes – Mondopoint system of sizing and marking
  • ISO/IEC 9496:2003 CHILL - The ITU-T programming language
  • ISO 9506 Industrial automation systems - Manufacturing Message Specification
  • ISO/IEC 9529 Information processing systems - Data interchange on 90 mm (3,5 in) flexible disk cartridges using modified frequency modulation recording at 15 916 ftprad, on 80 tracks on each side
    • ISO/IEC 9529-1:1989 Part 1: Dimensional, physical and magnetic characteristics
    • ISO/IEC 9529-2:1989 Part 2: Track format
  • ISO/IEC 9541 Information technology – Font information interchange
    • ISO/IEC 9541-1:1991 Architecture
    • ISO/IEC 9541-2:1991 Interchange Format
    • ISO/IEC 9541-3:1994 Glyph shape representation
    • ISO/IEC 9541-4:2009 Harmonization to Open Font Format
  • ISO/TR 9547:1988 Programming language processors - Test methods - Guidelines for their development and acceptability
  • ISO 9564 Financial services – Personal Identification Number (PIN) management and security
  • ISO/IEC 9579 Information technology – Remote database access for SQL with security enhancement
  • ISO/IEC 9592 Information technology – Computer graphics and image processing – Programmer's Hierarchical Interactive Graphics System (PHIGS)
  • ISO/IEC 9593 Information technology – Computer graphics – Programmer's Hierarchical Interactive Graphics System (PHIGS) language bindings[Note 3]
  • ISO/IEC 9594 Information technology – Open Systems Interconnection – The Directory
  • ISO/IEC 9636 Information technology - Computer graphics - Interfacing techniques for dialogues with graphical devices (CGI) - Functional specification
    • ISO/IEC 9636-1:1991 Overview, profiles, and conformance
    • ISO/IEC 9636-2:1991 Control
    • ISO/IEC 9636-3:1991 Output
    • ISO/IEC 9636-4:1991 Segments
    • ISO/IEC 9636-5:1991 Input and echoing
    • ISO/IEC 9636-6:1991 Raster
  • ISO/IEC 9638 Information technology - Computer graphics - Interfacing techniques for dialogues with graphical devices (CGI) - Language bindings
    • ISO/IEC 9638-3:1994 Part 3: Ada
  • ISO/IEC 9646 Information technology—Open Systems InterconnectionConformance testing methodology and framework
    • ISO/IEC 9646-1:1994 Part 1: General concepts
    • ISO/IEC 9646-2:1994 Part 2: Abstract Test Suite specification
    • ISO/IEC 9646-3:1998 Part 3: The Tree and Tabular Combined Notation (TTCN)
    • ISO/IEC 9646-4:1994 Part 4: Test realization
    • ISO/IEC 9646-5:1994 Part 5: Requirements on test laboratories and clients for the conformance assessment process
    • ISO/IEC 9646-6:1994 Part 6: Protocol profile test specification
    • ISO/IEC 9646-7:1995 Part 7: Implementation Conformance Statements
  • ISO 9660 Information processing – Volume and file structure of CD-ROM for information interchange
  • ISO 9712 Non-destructive testing - Qualification and certification of NDT personnel
  • ISO/IEC 9796 Information technology – Security techniques – Digital signature schemes giving message recovery
  • ISO/IEC 9797 Information technology – Security techniques – Message Authentication Codes (MACs)
    • ISO/IEC 9797-1:2011 Mechanisms using a block cipher
    • ISO/IEC 9797-2:2011 Mechanisms using a dedicated hash-function
    • ISO/IEC 9797-3:2011 Part 3: Mechanisms using a universal hash-function
  • ISO/IEC 9798 Information technology – Security techniques – Entity authentication
  • ISO/IEC 9834 Information technology – Open Systems Interconnection – Procedures for the operation of OSI Registration Authorities
  • ISO 9869 Thermal insulation – Building elements – In-situ measurements of thermal resistance and thermal transmittance
  • ISO 9873:2017 Dentistry - Intra-oral mirrors
  • ISO 9897:1997 Freight containers - Container equipment data exchange (CEDEX) - General communication codes
  • ISO/IEC 9899:2011 Programming languages – C
  • ISO/IEC/IEEE 9945:2009 Information technology – Portable Operating System Interface (POSIX®) Base Specifications, Issue 7
  • ISO 9984:1996 Information and documentation – Transliteration of Georgian characters into Latin characters
  • ISO 9985:1996 Information and documentation – Transliteration of Armenian characters into Latin characters
  • ISO 9992 Financial transaction cards – Messages between the integrated circuit card and the card accepting device
  • ISO/IEC 9995 Information technology – Keyboard layouts for text and office systems
  • ISO 9999 Assistive products for persons with disability – Classification and terminology

ISO 10000 – ISO 10999

  • ISO 10001:2007 Quality management – Customer satisfaction – Guidelines for codes of conduct for organizations
  • ISO 10002:2014 Quality management – Customer satisfaction – Guidelines for complaints handling in organizations
  • ISO 10003:2007 Quality management – Customer satisfaction – Guidelines for dispute resolution external to organizations
  • ISO 10004:2008 Quality management – Customer satisfaction – Guidelines for monitoring and measuring
  • ISO 10005:2005 Quality management systems – Guidelines for quality plans
  • ISO 10006:2003 Quality management systems – Guidelines for quality management in projects
  • ISO 10007:2003 Quality management systems – Guidelines for configuration management
  • ISO 10012:2003 Measurement management systems – Requirements for measurement processes and measuring equipment
  • ISO/TR 10013:2001 Guidelines for quality management system documentation
  • ISO 10014:2006 Quality management – Guidelines for realizing financial and economic benefits
  • ISO 10015:1999 Quality management – Guidelines for training
  • ISO/TR 10017:2003 Guidance on statistical techniques for ISO 9001:2000
  • ISO 10018:2012 Quality management – Guidelines on people involvement and competence
  • ISO 10019:2005 Guidelines for the selection of quality management system consultants and use of their services
  • ISO/IEC 10021 Information technology – Message Handling Systems (MHS)
  • ISO/IEC 10026 Information technology – Open Systems Interconnection
  • ISO/IEC TR 10034:1990 Guidelines for the preparation of conformity clauses in programming language standards
  • ISO 10077 Thermal performance of windows, doors and shutters – Calculation of thermal transmittance
  • ISO/IEC 10089 Information technology – 130 mm rewritable optical disk cartridge for information interchange
  • ISO/IEC 10116 Information technology – Security techniques – Modes of operation for an n-bit block cipher
  • ISO/IEC 10118 Information technology – Security techniques – Hash-functions
  • ISO 10160 Information and documentation – Open Systems Interconnection – Interlibrary Loan Application Service Definition
  • ISO 10161 Information and documentation – Open Systems Interconnection – Interlibrary Loan Application Protocol Specification
  • ISO/IEC 10164 Information technology – Open Systems Interconnection – Systems Management
  • ISO/IEC TR 10176:2003 Information technology - Guidelines for the preparation of programming language standards
  • ISO/IEC 10179:1996 Information technology – Processing languages – Document Style Semantics and Specification Language (DSSSL)
  • ISO/IEC TR 10182:2016 Information technology - Programming languages, their environments and system software interfaces - Guidelines for language bindings
  • ISO/IEC 10206:1991 Information technology – Programming languages – Extended Pascal
  • ISO 10211 Thermal bridges in building construction – Heat flows and surface temperatures – Detailed calculations
  • ISO 10218 Robots and robotic devices – Safety requirements for industrial robots
  • ISO 10273:2017 Microbiology of the food chain - Horizontal method for the detection of pathogenic Yersinia enterocolitica
  • ISO/IEC 10279:1991 Information technology – Programming languages – Full BASIC
  • ISO 10303 Industrial automation systems and integration – Product data representation and exchange
  • ISO/IEC 10367:1991 Information technology - Standardized coded graphic character sets for use in 8-bit codes
  • ISO 10380 Pipework — Corrugated metal hoses and hose assemblies
  • ISO 10383 Securities and related financial instruments – Codes for exchanges and market identification (MIC)
  • ISO 10386:1994 Ferroboron - Specification and conditions of delivery
  • ISO 10387:1994 Metal chrome - Specification and conditions of delivery
  • ISO 11400:1992 Nickel, ferronickel and nickel alloys - Determination of phosphorus content - Phosphovanadomolybdate molecular absorption spectrometric method
  • ISO 10456 Building materials and products – Hygrothermal properties – Tabulated design values and procedures for determining declared and design thermal values
  • ISO 10487 Passenger cars – Connections for car radios[Note 3]
  • ISO/IEC 10514 Information technology - Programming languages
    • ISO/IEC 10514-1:1996 Part 1: Modula-2, Base Language
    • ISO/IEC 10514-2:1998 Part 2: Generics Modula-2
    • ISO/IEC 10514-3:1998 Part 3: Object Oriented Modula-2
  • ISO/IEC 10538:1991 Information technology - Control functions for text communication
  • ISO 10555 Sterile, single-use intravascular catheters
  • ISO 10579 Geometrical product specifications (GPS) – Dimensioning and tolerancing – Non-rigid parts
  • ISO 10585:1996 Information and documentation - Armenian alphabet coded character set for bibliographic information interchange
  • ISO 10586:1996 Information and documentation - Georgian alphabet coded character set for bibliographic information interchange
  • ISO 10628 Flow diagrams for process plants
  • ISO/IEC 10646:2014 Information technology – Universal Coded Character Set (UCS)
  • ISO 10664 Hexalobular internal driving feature for bolts and screws – Torx screw head
  • ISO 10668 Brand valuation -- Requirements for monetary brand valuation
  • ISO 10754:1996 Information and documentation - Extension of the Cyrillic alphabet coded character set for non-Slavic languages for bibliographic information interchange
  • ISO/IEC 10746 Information technology -- Open Distributed Processing -- Reference model
    • ISO/IEC 10746-1:1998 Overview
    • ISO/IEC 10746-2:2009 Foundations
    • ISO/IEC 10746-3:2009 Architecture
    • ISO/IEC 10746-4:1998 Architectural semantics
  • ISO 10816 Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts
    • ISO 10816-1:1995 Part 1: General guidelines
    • ISO 10816-2:2009 Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min
    • ISO 10816-3:2009 Part 3: Industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15 000 r/min when measured in situ
    • ISO 10816-4:2009 Part 4: Gas turbine sets with fluid-film bearings
    • ISO 10816-5:2000 Part 5: Machine sets in hydraulic power generating and pumping plants
    • ISO 10816-6:1995 Part 6: Reciprocating machines with power ratings above 100 kW
    • ISO 10816-7:2009 Part 7: Rotodynamic pumps for industrial applications, including measurements on rotating shafts
    • ISO 10816-8:2014 Part 8: Reciprocating compressor systems
  • ISO 11822:1996 Information and documentation - Extension of the Arabic alphabet coded character set for bibliographic information interchange
  • ISO/IEC 10918 Information technology - Digital compression and coding of continuous-tone still images
    • ISO/IEC 10918-1:1994 Requirements and guidelines
    • ISO/IEC 10918-2:1995 Compliance testing
    • ISO/IEC 10918-3:1997 Extensions
    • ISO/IEC 10918-4:1999 Registration of JPEG profiles, SPIFF profiles, SPIFF tags, SPIFF colour spaces, APPn markers, SPIFF compression types and Registration Authorities (REGAUT)
    • ISO/IEC 10918-5:2013 JPEG File Interchange Format (JFIF)
    • ISO/IEC 10918-6:2013 Application to printing systems
  • ISO 10957 Information and documentation – International standard music number (ISMN)
  • ISO 10962 Securities and related financial instruments – Classification of Financial Instruments (CFI code)
  • ISO/IEC 10967 Information technology - Language independent arithmetic
    • ISO/IEC 10967-1:2012 Part 1: Integer and floating point arithmetic
    • ISO/IEC 10967-2:2001 Part 2: Elementary numerical functions
    • ISO/IEC 10967-3:2006 Part 3: Complex integer and floating point arithmetic and complex elementary numerical functions
  • ISO 10993 Biological evaluation of medical devices

ISO 11000 – ISO 11999

  • ISO 11014:2009 Safety data sheet for chemical products - Content and order of sections
  • ISO/IEC TR 11017:1998 Information technology - Framework for internationalization
  • ISO 11064 Ergonomic design of control centres
    • ISO 11064-1:2000 Principles for the design of control centres
    • ISO 11064-2:2000 Principles for the arrangement of control suites
    • ISO 11064-3:1999 Control room layout ISO 11064-3:1999/Cor 1:2002
    • ISO 11064-4:2013 Layout and dimensions of workstations
    • ISO 11064-5:2008 Displays and controls
    • ISO 11064-6:2005 Environmental requirements for control centres
    • ISO 11064-7:2006 Principles for the evaluation of control centres
  • ISO 11120 Gas cylinders -- Refillable seamless steel tubes of water capacity between 150 l and 3000 l -- Design, construction and testing
  • ISO 11290 Microbiology of the food chain - Horizontal method for the detection and enumeration of Listeria monocytogenes and of Listeria spp.
    • ISO 11290-1:2017 Part 1: Detection method
    • ISO 11290-2:2017 Part 2: Enumeration method
  • ISO 11135:2014 Sterilization of health-care products—Ethylene oxide—Requirements for the development, validation and routine control of a sterilization process for medical devices
  • ISO 11137 Sterilization of health care products – Radiation
  • ISO 11138 Sterilization of health care products - Biological indicators
    • ISO 11138-1:2017 Part 1: General requirements
    • ISO 11138-2:2017 Part 2: Biological indicators for ethylene oxide sterilization processes
    • ISO 11138-3:2017 Part 3: Biological indicators for moist heat sterilization processes
    • ISO 11138-4:2017 Part 4: Biological indicators for dry heat sterilization processes
    • ISO 11138-5:2017 Part 5: Biological indicators for low-temperature steam and formaldehyde sterilization processes
  • ISO 11170:2003 Hydraulic fluid power – Filter elements – Sequence of tests for verifying performance characteristics
  • ISO 11171:2010 Hydraulic fluid power – Calibration of automatic particle counters for liquids
  • ISO/IEC 11172 Information technology – Coding of moving pictures and associated audio for digital storage media at up to about 1,5 Mbit/s
  • ISO/IEC 11179 Information technology – Metadata registries (MDR)
  • ISO 11357 Plastics – Differential scanning calorimetry (DSC)
    • ISO 11357-1:2009 General principles
    • ISO 11357-2:2013 Determination of glass transition temperature and glass transition step height
    • ISO 11357-3:2011 Determination of temperature and enthalpy of melting and crystallization
    • ISO 11357-4:2005 Determination of specific heat capacity
    • ISO 11357-5:2013 Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
    • ISO 11357-6:2008 Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
    • ISO 11357-7:2002 Determination of crystallization kinetics
  • ISO/IEC 11404:2007 Information technology – General-Purpose Datatypes (GPD)
  • ISO/IEC 11411:1995 Information technology - Representation for human communication of state transition of software
  • ISO 11446:2004 Road vehicles – Connectors for the electrical connection of towing and towed vehicles – 13-pole connectors for vehicles with 12 V nominal supply voltage
  • ISO 11469:2000 Plastics – Generic identification and marking of plastics products
  • ISO/IEC 11544:1993 Information technology - Coded representation of picture and audio information - Progressive bi-level image compression
  • ISO/IEC 11578:1996 Information technologyOpen Systems InterconnectionRemote procedure call (RPC)
  • ISO 11609:2017 Dentistry - Dentifrices - Requirements, test methods and marking
  • ISO 11731:2017 Water quality - Enumeration of Legionella
  • ISO/IEC 11756:1999 Information technology - Programming languages - M
  • ISO 11783 Tractors and machinery for agriculture and forestry – Serial control and communications data network
  • ISO/IEC 11801 Information technology – Generic cabling for customer premises
  • ISO 11898 Road vehicles – Controller area network (CAN)
  • ISO 11940:1998 Information and documentation - Transliteration of Thai
    • ISO 11940-2:2007 Information and documentation - Transliteration of Thai characters into Latin characters - Part 2: Simplified transcription of Thai language

ISO 12000 – ISO 12999

  • ISO 12006 Building construction – Organization of information about construction works
  • ISO 12085:1996 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Motif parameters
  • ISO/IEC 12088-4:1995 Information technology - Computer graphics and image processing - Image processing and interchange - Application program interface language bindings
  • ISO 12100 Safety of machinery – General principles for design – Risk assessment and risk reduction
  • ISO 12180 Geometrical product specifications (GPS) - Cylindricity
    • ISO 12180-1:2011 Part 1: Vocabulary and parameters of cylindrical form
    • ISO 12180-2:2011 Part 2: Specification operators
  • ISO 12181 Geometrical product specifications (GPS) - Roundness
    • ISO 12181-1:2011 Part 1: Vocabulary and parameters of roundness
    • ISO 12181-2:2011 Part 2: Specification operators
  • ISO/IEC TR 12182:2015 Systems and software engineering - Framework for categorization of IT systems and software, and guide for applying it
  • ISO/IEC 12207 Systems and software engineering – Software life cycle processes
  • ISO 12639 Graphic technology – Prepress digital data exchange – Tag image file format for image technology (TIFF/IT)
  • ISO 12641 Graphic technology – Prepress digital data exchange – Colour targets for input scanner calibration
  • ISO 12780 Geometrical product specifications (GPS) - Straightness
    • ISO 12780-1:2011 Part 1: Vocabulary and parameters of straightness
    • ISO 12780-2:2011 Part 2: Specification operators
  • ISO 12781 Geometrical product specifications (GPS) - Flatness
    • ISO 12781-1:2011 Part 1: Vocabulary and parameters of flatness
    • ISO 12781-2:2011 Part 2: Specification operators
  • ISO/TS 12805:2011 Nanotechnologies – Materials specifications – Guidance on specifying nano-objects
  • ISO/TR 12859:2009 Intelligent transport systems – System architecture – Privacy aspects in ITS standards and systems
  • ISO 12944 Paints and varnishes – Corrosion protection of steel structures by protective paint systems

ISO 13000 – ISO 13999

  • ISO 13007 Ceramic tiles – Grouts and adhesives
    • ISO 13007-1:2014 Terms, definitions and specifications for adhesives
    • ISO 13007-2:2010 Test methods for adhesives
    • ISO 13007-3:2010 Terms, definitions and specifications for grouts
    • ISO 13007-4:2013 Test methods for grouts
  • ISO/TR 13121:2011 Nanotechnologies – Nanomaterial risk evaluation
  • ISO/IEC 13210:1999 Information technology - Requirements and Guidelines for Test Methods Specifications and Test Method Implementations for Measuring Conformance to POSIX Standards
  • ISO/IEC 13211 Information technology - Programming languages - Prolog
    • ISO/IEC 13211-1:1995 Part 1: General core
    • ISO/IEC 13211-2:2000 Part 2: Modules
  • ISO/IEC 13235 Information technology - Open Distributed Processing - Trading function
    • ISO/IEC 13235-1:1998 Specification
    • ISO/IEC 13235-3:1998 Part 3: Provision of Trading Function using OSI Directory service
  • ISO 13239 Information technology – Telecommunications and information exchange between systems – High-level data link control (HDLC) procedures
  • ISO/IEC 13244:1998 Information technology - Open Distributed Management Architecture
  • ISO/IEC 13249 Information technology – Database languages – SQL multimedia and application
    • ISO/IEC 13249-1:2016 Part 1: Framework
    • ISO/IEC 13249-2:2003 Part 2: Full-Text
    • ISO/IEC 13249-3:2016 Part 3: Spatial
    • ISO/IEC 13249-5:2003 Part 5: Still image
    • ISO/IEC 13249-6:2006 Part 6: Data mining
    • ISO/IEC TS 13249-7:2013 Part 7: History
  • ISO/IEC 13250 Information technology – Topic Maps[Note 3]
  • ISO 13320:2009 Particle size analysis - Laser diffraction methods
  • ISO/IEC 13346 Information technology – Volume and file structure of write-once and rewritable media using non-sequential recording for information interchange
  • ISO 13370 Thermal performance of buildings – Heat transfer via the ground – Calculation methods
  • ISO 13399 Cutting tool data representation and exchange
    • ISO 13399-1:2006 Part 1: Overview, fundamental principles and general information model
    • ISO/TS 13399-2:2014 Part 2: Reference dictionary for the cutting items
    • ISO/TS 13399-3:2014 Part 3: Reference dictionary for tool items
    • ISO/TS 13399-4:2014 Part 4: Reference dictionary for adaptive items
    • ISO/TS 13399-5:2014 Part 5: Reference dictionary for assembly items
    • ISO/TS 13399-50:2013 Part 50: Reference dictionary for reference systems and common concepts
    • ISO/TS 13399-60:2014 Part 60: Reference dictionary for connection systems
    • ISO/TS 13399-70:2016 Part 70: Graphical data layout - Layer setting for tool layout
    • ISO/TS 13399-71:2016 Part 71: Graphical data layout - Creation of documents for standardized data exchange: Graphical product information
    • ISO/TS 13399-72:2016 Part 72: Creation of documents for the standardized data exchange - Definition of properties for drawing header and their XML-data exchange
    • ISO/TS 13399-80:2017 Part 80: Creation and exchange of 3D models - Overview and principles
    • ISO/TS 13399-100:2008 Part 100: Definitions, principles and methods for reference dictionaries
    • ISO/TS 13399-150:2008 Part 150: Usage guidelines
    • ISO/TS 13399-201:2014 Part 201: Creation and exchange of 3D models - Regular inserts
    • ISO/TS 13399-202:2015 Part 202: Creation and exchange of 3D models - Irregular inserts
    • ISO/TS 13399-203:2015 Part 203: Creation and exchange of 3D models - Replaceable inserts for drilling
    • ISO/TS 13399-204:2016 Part 204: Creation and exchange of 3D models - Inserts for reaming
    • ISO/TS 13399-301:2013 Part 301: Concept for the design of 3D models based on properties according to ISO/TS 13399-3: Modelling of thread-cutting taps, thread-forming taps and thread-cutting dies
    • ISO/TS 13399-302:2013 Part 302: Concept for the design of 3D models based on properties according to ISO/TS 13399-3: Modelling of solid drills and countersinking tools
    • ISO/TS 13399-303:2016 Part 303: Creation and exchange of 3D models - Solid end mills
    • ISO/TS 13399-304:2016 Part 304: Creation and exchange of 3D models - Solid milling cutters with arbor hole
    • ISO/TS 13399-305:2017 Part 305: Creation and exchange of 3D models - Modular tooling systems with adjustable cartridges for boring
    • ISO/TS 13399-307:2016 Part 307: Creation and exchange of 3D models - End mills for indexable inserts
    • ISO/TS 13399-308:2016 Part 308: Creation and exchange of 3D models - Milling cutters with arbor hole for indexable inserts
    • ISO/TS 13399-309:2016 Part 309: Creation and exchange of 3D models - Tool holders for indexable inserts
    • ISO/TS 13399-310:2017 Part 310: Creation and exchange of 3D models - Turning tools with carbide tips
    • ISO/TS 13399-311:2016 Part 311: Creation and exchange of 3D models - Solid reamers
    • ISO/TS 13399-312:2016 Part 312: Creation and exchange of 3D models - Reamers for indexable inserts
    • ISO/TS 13399-401:2016 Part 401: Creation and exchange of 3D models - Converting, extending and reducing adaptive items
    • ISO/TS 13399-405:2016 Part 405: Creation and exchange of 3D models - Collets
  • ISO 13406-2:2001 Ergonomic requirements for work with visual displays based on flat panels – Part 2: Ergonomic requirements for flat panel displays [withdrawn 2008-11-14]
  • ISO 13450 Photography – 110-size cartridge, film and backing paper – Dimensions
  • ISO 13482:2014 Robots and robotic devices – Safety requirements for personal care robots
  • ISO 13485:2003 Medical devices – Quality management systems – Requirements for regulatory purposes
  • ISO/IEC 13490 Information technology – Volume and file structure of read-only and write-once compact disk media for information interchange
  • ISO 13565 Geometrical Product Specifications (GPS) - Surface texture: Profile method; Surfaces having stratified functional properties
    • ISO 13565-1:1996 Part 1: Filtering and general measurement conditions
    • ISO 13565-2:1996 Part 2: Height characterization using the linear material ratio curve
    • ISO 13565-3:1998 Part 3: Height characterization using the material probability curve
  • ISO 13567 Technical product documentation – Organization and naming of layers for CAD
  • ISO/IEC 13568:2002 Information Technology – Z formal specification notation – Syntax, type system and semantics
  • ISO 13577 Industrial furnaces and associated processing equipment - Safety
    • ISO 13577-1:2016 Part 1: General requirements
    • ISO 13577-2:2014 Part 2: Combustion and fuel handling systems
    • ISO 13577-3:2016 Part 3: Generation and use of protective and reactive atmosphere gases
    • ISO 13577-4:2014 Part 4: Protective systems
  • ISO 13579 Industrial furnaces and associated processing equipment - Method of measuring energy balance and calculating efficiency
    • ISO 13579-1:2013 General methodology
    • ISO 13579-2:2013 Reheating furnaces for steel
    • ISO 13579-3:2013 Batch-type aluminium melting furnaces
    • ISO 13579-4:2013 Furnaces with protective or reactive atmosphere
  • ISO 13586:2000 Plastics - Determination of fracture toughness (GIC and KIC) -- Linear elastic fracture mechanics (LEFM) approach
  • ISO 13616 Financial services – International bank account number (IBAN)
  • ISO 13628 Petroleum and natural gas industries – Design and operation of subsea production systems
    • ISO 13628-1:2005 Part 1: General requirements and recommendations
    • ISO 13628-2:2006 Part 2: Unbonded flexible pipe systems for subsea and marine applications
    • ISO 13628-3:2000 Part 3: Through flowline (TFL) systems
    • ISO 13628-4:2010 Part 4: Subsea wellhead and tree equipment
    • ISO 13628-5:2009 Part 5: Subsea umbilicals
    • ISO 13628-6:2006 Part 6: Subsea production control systems
    • ISO 13628-7:2005 Part 7: Completion/workover riser systems
    • ISO 13628-8:2002 Part 8: Remotely Operated Vehicle (ROV) interfaces on subsea production systems
    • ISO 13628-9:2000 Part 9: Remotely Operated Tool (ROT) intervention systems
    • ISO 13628-10:2005 Part 10: Specification for bonded flexible pipe
    • ISO 13628-11:2007 Part 11: Flexible pipe systems for subsea and marine applications
    • ISO 13628-15:2011 Part 15: Subsea structures and manifolds
  • ISO 13702 Petroleum and natural gas industries -- Control and mitigation of fires and explosions on offshore production installations -- Requirements and guidelines
  • ISO 13715 Technical drawings—Edges of undefined shape—Vocabulary and indications
  • ISO/IEC 13719 Information technology - Portable Common Tool Environment (PCTE)
    • ISO/IEC 13719-1:1998 Part 1: Abstract specification
    • ISO/IEC 13719-2:1998 Part 2: C programming language binding
    • ISO/IEC 13719-3:1998 Part 3: Part 3: Ada programming language binding
    • ISO/IEC 13719-4:1998 Part 4: IDL binding (Interface Definition Language)
  • ISO/IEC 13751:2001 Information technology - Programming languages, their environments and system software interfaces - Programming language Extended APL
  • ISO/IEC 13800:1996 Information technology - Procedure for the registration of identifiers and attributes for volume and file structure
  • ISO/IEC 13816:2007 Information technology - Programming languages, their environments and system software interfaces - Programming language ISLISP
  • ISO/IEC 13817 Information technology - Programming languages, their environments and system software interfaces - Vienna Development Method - Specification Language
    • ISO/IEC 13817-1:1996 Part 1: Base language
  • ISO/IEC 13818 Information technology – Generic coding of moving pictures and associated audio information
  • ISO 13837 Road vehicles – Safety glazing materials – Method for the determination of solar transmittance
  • ISO 13849 Safety of machinery – Safety related parts of control systems
  • ISO/IEC 13886:1996 Information technology - Language-Independent Procedure Calling (LIPC)

ISO 14000 – ISO 14999

  • ISO 14000 Environmental management systems [This is a set of standards, rather than a single standard.]
  • ISO 14001 Environmental management systems – Requirements with guidance for use
  • ISO 14004 Environmental management systems – General guidelines on principles, systems and support techniques
  • ISO 14031 Environmental management - Environmental performance evaluation – Guidelines
  • ISO 14050 Environmental management – Vocabulary
  • ISO 14051 Environmental management – Material flow cost accounting - General framework
  • ISO 14064 Greenhouse gases
  • ISO/TR 14073:2017 Environmental management - Water footprint - Illustrative examples on how to apply ISO 14046
  • ISO/IEC 14102:2008 Information technology - Guideline for the evaluation and selection of CASE tools
  • ISO/IEC 14143 Information technology - Software measurement - Functional size measurement
    • ISO/IEC 14143-1:2007 Part 1: Definition of concepts
    • ISO/IEC 14143-2:2011 Part 2: Conformity evaluation of software size measurement methods to ISO/IEC 14143-1
    • ISO/IEC TR 14143-3:2003 Part 3: Verification of functional size measurement methods
    • ISO/IEC TR 14143-4:2002 Part 4: Reference model
    • ISO/IEC TR 14143-5:2004 Part 5: Determination of functional domains for use with functional size measurement
    • ISO/IEC 14143-6:2012 Part 6: Guide for use of ISO/IEC 14143 series and related International Standards
  • ISO 14155:2011 Clinical investigation of medical devices for human subjects – Good clinical practice
  • ISO 14223 Radiofrequency [sic] identification of animals – Advanced transponders
  • ISO 14224 Petroleum, petrochemical and natural gas industries - Collection and exchange of reliability and maintenance data for equipment
  • ISO 14230 Road vehicles – Diagnostic systems – Keyword Protocol 2000
  • ISO/IEC TR 14252:1996 Information technology - Guide to the POSIX Open System Environment (OSE) [Withdrawn without replacement]
  • ISO 14253 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment
    • ISO 14253-1:2013 Part 1: Decision rules for proving conformity or nonconformity with specifications
    • ISO 14253-2:2011 Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification
    • ISO 14253-3:2011 Part 3: Guidelines for achieving agreements on measurement uncertainty statements
    • ISO 14253-5:2015 Part 5: Uncertainty in verification testing of indicating measuring instruments
    • ISO/TR 14253-6:2012 Part 6: Generalized decision rules for the acceptance and rejection of instruments and workpieces
  • ISO 14362 Textiles - Methods for determination of certain aromatic amines derived from azo colorants
    • ISO 14362-1:2017 Part 1: Detection of the use of certain azo colorants accessible with and without extracting the fibres
    • ISO 14362-3:2017 Part 3: Detection of the use of certain azo colorants, which may release 4-aminoazobenzene
  • ISO/IEC TR 14369:2014 Information technology - Programming languages, their environments and system software interfaces - Guidelines for the preparation of Language-Independent Service Specifications (LISS)
  • ISO 14405-1 Geometrical product specifications (GPS) – Dimensional tolerancing – Part 1: Linear sizes
  • ISO 14406:2010 Geometrical product specifications (GPS) - Extraction
  • ISO/IEC 14443 Identification cards – Contactless integrated circuit cards – Proximity cards
  • ISO/IEC 14462 - Open-EDI Reference Model
  • ISO/IEC TR 14471:2007 Information technology - Software engineering - Guidelines for the adoption of CASE tools
  • ISO/IEC 14492:2001 Information technology - Lossy/lossless coding of bi-level images
  • ISO/IEC 14495 Information technology - Lossless and near-lossless compression of continuous-tone still images
    • ISO/IEC 14495-1:1999 Baseline
    • ISO/IEC 14495-2:2003 Extensions
  • ISO/IEC 14496 Information technology – Coding of audio-visual objects
  • ISO/IEC 14515 Information technology - Portable Operating System Interface (POSIX®) - Test methods for measuring conformance to POSIX
    • ISO/IEC 14515-1:2000 Part 1: System interfaces
  • ISO/IEC 14519:2001 Information technology - POSIX Ada Language Interfaces - Binding for System Application Program Interface (API)
  • ISO/IEC 14568:1997 Information technology - DXL: Diagram eXchange Language for tree-structured charts
  • ISO/IEC 14598 Software engineering - Product evaluation[Note 3]
    • ISO/IEC 14598-5:1998 Part 5: Process for evaluators
    • ISO/IEC 14598-6:2001 Part 6: Documentation of evaluation modules
  • ISO 14638:2015 Geometrical product specifications (GPS) - Matrix model
  • ISO 14641 Electronic archiving
    • ISO 14641-1:2012 Specifications concerning the design and the operation of an information system for electronic information preservation
  • ISO 14644 Cleanrooms and associated controlled environments
  • ISO/IEC 14651:2016 Information technology - International string ordering and comparison - Method for comparing character strings and description of the common template tailorable ordering
  • ISO 14698 Cleanrooms and associated controlled environments – Biocontamination control
    • ISO 14698-1:2003 General principles and methods
    • ISO 14698-2:2003 Evaluation and interpretation of biocontamination data
  • ISO/IEC 14750:1999 Information technology – Open Distributed Processing – Interface Definition Language
  • ISO/IEC 14752:2000 Information technology - Open Distributed Processing - Protocol support for computational interactions
  • ISO/IEC 14753:1999 Information technology - Open Distributed Processing - Interface references and binding
  • ISO/IEC 14755 Information technology – Input methods to enter characters from the repertoire of ISO/IEC 10646 with a keyboard or other input device
  • ISO/IEC 14756:1999 Information technology - Measurement and rating of performance of computer-based software systems
  • ISO/IEC 14764:2006 Software Engineering - Software Life Cycle Processes - Maintenance
  • ISO/IEC 14769:2001 Information technology - Open Distributed Processing - Type Repository Function
  • ISO/IEC 14771:1999 Information technology - Open Distributed Processing - Naming framework
  • ISO/IEC 14772 Information technology - Computer graphics and image processing - The Virtual Reality Modeling Language (VRML)[Note 3]
    • ISO/IEC 14772-1:1997 Part 1: Functional specification and UTF-8 encoding
    • ISO/IEC 14772-2:2004 Part 2: External authoring interface (EAI)
  • ISO 14801 Dentistry – Implants – Dynamic fatigue test for endosseous dental implants
  • ISO/IEC 14834:1996 Information technology - Distributed Transaction Processing - The XA Specification
  • ISO 14855 Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions – Method by analysis of evolved carbon dioxide
    • ISO 14855-1:2012 General method
    • ISO 14855-2:2007 Gravimetric measurement of carbon dioxide evolved in a laboratory-scale test
  • ISO/IEC 14863:1996 Information technology - System-Independent Data Format (SIDF)
  • ISO/IEC 14882:2014 Programming Languages – C++
  • ISO 14915 Software ergonomics for multimedia user interfaces
    • ISO 14915-1:2002 Design principles and framework
    • ISO 14915-2:2003 Multimedia navigation and control
    • ISO 14915-3:2002 Media selection and combination
  • ISO 14917:2017 Thermal spraying - Terminology, classification
  • ISO 14971:2007 Medical devices – Application of risk management to medical devices
  • ISO/IEC 14977:1996 Information technology – Syntactic metalanguage – Extended BNF

ISO 15000 – ISO 15999

  • ISO/TS 15000 Electronic business eXtensible Markup Language ebXML
  • ISO 15022 Securities – Scheme for messages (Data Field Dictionary)
  • ISO/IEC 15026 Systems and software engineering -- Systems and software assurance
    • ISO/IEC 15026-1:2013 Part 1: Concepts and vocabulary
    • ISO/IEC 15026-2:2011 Part 2: Assurance case
    • ISO/IEC 15026-3:2015 Part 3: System integrity levels
    • ISO/IEC 15026-4:2012 Part 4: Assurance in the life cycle
  • ISO 15082 Road vehicles – Tests for rigid plastic safety glazing materials
  • ISO 15099 Thermal performance of windows, doors and shading devices – Detailed calculations
  • ISO 15112 Natural gas – Energy determination
  • ISO 15118 Road vehicles - Vehicle to grid communication interface
  • ISO/IEC 15145:1997 Information technology - Programming languages - FORTH
  • ISO 15189 Medical laboratories – Particular requirements for quality and competence
  • ISO 15216 Microbiology of the food chain - Horizontal method for determination of hepatitis A virus and norovirus using real-time RT-PCR
    • ISO 15216-1:2017 Microbiology of the food chain - Horizontal method for determination of hepatitis A virus and norovirus using real-time RT-PCR - Part 1: Method for quantification
    • ISO/TS 15216-2:2013 Microbiology of food and animal feed - Horizontal method for determination of hepatitis A virus and norovirus in food using real-time RT-PCR - Part 2: Method for qualitative detection
  • ISO 15223 Medical devices – Symbols to be used with medical device labels, labelling, and information to be supplied
  • ISO/IEC/IEEE 15288:2015 Systems and software engineering – System life cycle processes
  • ISO/IEC/IEEE 15289:2017 Systems and software engineering – Content of life-cycle information items (documentation)
  • ISO/IEC 15291:1999 Information technology – Programming languages – Ada Semantic Interface Specification (ASIS)
  • ISO 15403 Natural gas – Natural gas for use as a compressed fuel for vehicles
    • ISO 15403-1:2006 Part 1: Designation of the quality
    • ISO/TR 15403-2:2006 Part 2: Specification of the quality
  • ISO/IEC 15408 Information technology – Security techniques – Evaluation criteria for IT security
  • ISO/IEC 15414:2015 Information technology - Open data processing - Reference Model - Enterprise Language
  • ISO/IEC 15434 Information technology – Automatic identification and data capture techniques – Syntax for high-capacity ADC media
  • ISO/IEC 15437:2001 Information technology - Enhancements to LOTOS (E-LOTOS)
  • ISO/IEC 15444 Information technology – JPEG 2000 image coding system
    • ISO/IEC 15444-1:2016 Core coding system
    • ISO/IEC 15444-2:2004 Extensions
    • ISO/IEC 15444-3:2007 Motion JPEG 2000
    • ISO/IEC 15444-4:2004 Conformance testing
    • ISO/IEC 15444-5:2015 Reference software
    • ISO/IEC 15444-6:2013 Part 6: Compound image file format
    • ISO/IEC 15444-8:2007 Secure JPEG 2000
    • ISO/IEC 15444-9:2005 Interactivity tools, APIs and protocols
    • ISO/IEC 15444-10:2011 Extensions for three-dimensional data
    • ISO/IEC 15444-11:2007 Wireless
    • ISO/IEC 15444-13:2008 An entry level JPEG 2000 encoder
    • ISO/IEC 15444-14:2013 Part 14: XML representation and reference
  • ISO/IEC 15445:2000 Information technology – Document description and processing languages – HyperText Markup Language (HTML)
  • ISO/IEC 15474 Information technology - CDIF framework
    • ISO/IEC 15474-1:2002 Part 1: Overview
    • ISO/IEC 15474-2:2002 Part 2: Modelling and extensibility
  • ISO/IEC 15475 Information technology - CDIF transfer format
    • ISO/IEC 15475-1:2002 Part 1: General rules for syntaxes and encodings
    • ISO/IEC 15475-2:2002 Part 2: Syntax SYNTAX.1
    • ISO/IEC 15475-3:2002 Part 3: Encoding ENCODING.1
  • ISO/IEC 15476 Information technology - CDIF semantic metamodel
    • ISO/IEC 15476-1:2002 Part 1: Foundation
    • ISO/IEC 15476-2:2002 Part 2: Common
    • ISO/IEC 15476-3:2006 Part 3: Data definitions
    • ISO/IEC 15476-4:2005 Part 4: Data models
    • ISO/IEC 15476-6:2006 Part 6: State/event models
  • ISO 15489 Information and documentation – Records management
    • ISO 15489-1:2016 Part 1: Concepts and principles
    • ISO/TR 15489-2:2001 Part 2: Guidelines [Withdrawn, no replacement]
  • ISO/IEC 15504 Information technology – Process assessment
  • ISO 15511:2011 Information and documentation - International standard identifier for libraries and related organizations (ISIL)
  • ISO 15614 Specification and qualification of welding procedures for metallic materials – Welding procedure test
  • ISO 15686 Buildings and constructed assets – Service life planning
  • ISO/IEC 15693 Identification cards – Contactless integrated circuit cards – Vicinity cards
  • ISO 15706 Information and documentation – International Standard Audiovisual Number (ISAN)
  • ISO 15707 Information and documentation – International Standard Musical Work Code (ISWC)
  • ISO 15783:2002 Seal-less rotodynamic pumps – Class II – Specification
  • ISO 15836 Information and documentation – The Dublin Core metadata element set
  • ISO/IEC 15851:1999 Information technology - Communication protocol - Open MUMPS Interconnect
  • ISO/IEC 15852:1999 Information technology - Programming languages - M Windowing API
  • ISO/IEC 15897:2011 Information technology - User interfaces - Procedures for the registration of cultural elements
  • ISO/IEC 15909 Systems and software engineering - High-level Petri nets
    • ISO/IEC 15909-1:2004 Part 1: Concepts, definitions and graphical notation
    • ISO/IEC 15909-2:2011 Part 2: Transfer format
  • ISO 15919:2001 Information and documentation - Transliteration of Devanagari and related Indic scripts into Latin characters
  • ISO 15924:2004 Information and documentation – Codes for the representation of names of scripts
  • ISO 15926 - Integration of Life-cycle Data for Process Plants including Oil and Gas Production Facilities
  • ISO 15930 Graphic technology – Prepress digital data exchange using PDF[Note 3]
  • ISO/IEC/IEEE 15939:2017 Systems and software engineering - Measurement process
  • ISO/IEC 15940:2013 Systems and software engineering - Software Engineering Environment Services
  • ISO/IEC TR 15942:2000 Information technology - Programming languages - Guide for the use of the Ada programming language in high integrity systems
  • ISO/IEC 15944 - Business Agreement Semantic Descriptive Techniques
  • ISO/IEC 15948 Information technology – Computer graphics and image processing – Portable Network Graphics (PNG): Functional specification
  • ISO 15970 Natural gas – Measurement of properties – Volumetric properties: density, pressure, temperature and compression factor
  • ISO 15971:2008 Natural gas – Measurement of properties – Calorific value and Wobbe index
  • ISO 15985:2004 Plastics – Determination of the ultimate anaerobic biodegradation and disintegration under high-solids anaerobic-digestion conditions – Method by analysis of released biogas

ISO 16000 – ISO 16999

  • ISO/IEC 16085:2006 Systems and software engineering - Life cycle processes - Risk management
  • ISO 16134 Earthquake- and subsidence-resistant design of ductile iron pipelines
  • ISO 16232 Road vehicles – Cleanliness of components of fluid circuits
    • ISO 16232-1:2007 Part 1: Vocabulary
    • ISO 16232-2:2007 Part 2: Method of extraction of contaminants by agitation
    • ISO 16232-3:2007 Part 3: Method of extraction of contaminants by pressure rinsing
    • ISO 16232-4:2007 Part 4: Method of extraction of contaminants by ultrasonic techniques
    • ISO 16232-5:2007 Part 5: Method of extraction of contaminants on functional test bench
    • ISO 16232-6:2007 Part 6: Particle mass determination by gravimetric analysis
    • ISO 16232-7:2007 Part 7: Particle sizing and counting by microscopic analysis
    • ISO 16232-8:2007 Part 8: Particle nature determination by microscopic analysis
    • ISO 16232-9:2007 Part 10: Particle sizing and counting by automatic light extinction particle counter
    • ISO 16232-10:2007 Part 10: Expression of results
  • ISO/IEC 16262:2011 Information technology – Programming languages, their environments and system software interfaces – ECMAScript language specification
  • ISO/IEC/IEEE 16326:2009 Systems and software engineering - Life cycle processes - Project management
  • ISO/IEC 16350:2015 Information technology - Systems and software engineering - Application management
  • ISO 16355 Applications of statistical and related methods to new technology and product development process
    • ISO 16355-1:2015 Part 1: General principles and perspectives of Quality Function Deployment (QFD)
    • ISO 16355-2:2017 Part 2: Non-quantitative approaches for the acquisition of voice of customer and voice of stakeholder
    • ISO 16355-4:2017 Part 4: Analysis of non-quantitative and quantitative Voice of Customer and Voice of Stakeholder
    • ISO 16355-5:2017 Part 5: Solution strategy
    • ISO/TR 16355-8:2017 Part 8: Guidelines for commercialization and life cycle
  • ISO/IEC 16485:2000 Information technology - Mixed Raster Content (MRC)
  • ISO/IEC 16500 Information technology – Generic digital audio-visual systems
  • ISO/IEC 16509:1999 Information technology - Year 2000 terminology
  • ISO 16549 Textiles – Unevenness of textile strands – Capacitance method
  • ISO 16610 Geometrical product specifications (GPS) – Filtration
  • ISO 16750 Road vehicles – Environmental conditions and testing for electrical and electronic equipment
  • ISO 16792 Technical product documentation - Digital product definition data practices
  • ISO/TS 16949 Quality management systems – Particular requirements for the application of ISO 9001:2008 for automotive production and relevant service part organizations
  • ISO/TR 16982:2002 Ergonomics of human-system interaction – Usability methods supporting human-centred design

ISO 17000 – ISO 17999

  • ISO/IEC 17020:2012 Conformity assessment—Requirements for the operation of various types of bodies performing inspection
  • ISO/IEC 17021:2011 Conformity assessment—Requirements for bodies providing audit and certification of management systems
    • ISO/IEC 17021-1:2015 Part 1: Requirements
    • ISO/IEC 17021-2:2016 Part 2: Competence requirements for auditing and certification of environmental management systems
    • ISO/IEC 17021-3:2017 Part 3: Competence requirements for auditing and certification of quality management systems
    • ISO/IEC TS 17021-4:2013 Part 4: Competence requirements for auditing and certification of event sustainability management systems
    • ISO/IEC TS 17021-5:2014 Part 5: Competence requirements for auditing and certification of asset management systems
    • ISO/IEC TS 17021-6:2014 Part 6: Competence requirements for auditing and certification of business continuity management systems
    • ISO/IEC TS 17021-7:2014 Part 7: Competence requirements for auditing and certification of road traffic safety management systems
    • ISO/IEC TS 17021-9:2016 Part 9: Competence requirements for auditing and certification of anti-bribery management systems
  • ISO/IEC TS 17022:2012 Conformity assessment—Requirements and recommendations for content of a third-party audit report on management systems
  • ISO/IEC TS 17023:2013 Conformity assessment—Guidelines for determining the duration of management system certification audits
  • ISO/IEC 17024:2003 Conformity assessment – General requirements for bodies operating certification of persons
  • ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories
  • ISO/IEC 17050:2004 Conformity assessment — Supplier's declaration of conformity
    • ISO/IEC 17050-1:2004 Part 1: General requirements
    • ISO/IEC 17050-2:2004 Part 2: Supporting documentation
  • ISO/IEC 17065:2012 Conformity assessment—Requirements for bodies certifying products, processes and services
  • ISO 17075 Leather - Chemical determination of chromium(VI) content in leather
    • ISO 17075-1:2017 Part 1: Colorimetric method
    • ISO 17075-2:2017 Part 2: Chromatographic method
  • ISO 17088:2012 Specifications for compostable plastics
  • ISO 17100:2015 Translation services—Requirements for translation services
  • ISO 17202 Textiles – Determination of twist in single spun yarns – Untwist/retwist method
  • ISO 17316:2015 Information and documentation - International standard link identifier (ISLI)
  • ISO 17442:2012 Financial services - Legal Entity Identifier (LEI)
  • ISO 17450 Geometrical product specifications (GPS) - General concepts
    • ISO 17450-1:2011 Part 1: Model for geometrical specification and verification
    • ISO 17450-2:2012 Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities
    • ISO 17450-3:2016 Part 3: Toleranced features
  • ISO/PAS 17506 Industrial automation systems and integration – COLLADA digital asset schema specification for 3D visualization of industrial data
  • ISO 17772 Energy performance of buildings - Indoor environmental quality
    • ISO 17772-1:2017 Part 1: Indoor environmental input parameters for the design and assessment of energy performance of buildings
  • ISO 17776 Petroleum and natural gas industries – Offshore production installations – Guidelines on tools and techniques for hazard identification and risk assessment
  • ISO 17799 - Code of Practice for Information Security Management (superseded by ISO/IEC 27002)
  • ISO/TS 17863:2013 Geometrical product specification (GPS) - Tolerancing of moveable assemblies
  • ISO 17894 Ships and marine technology – Computer applications – General principles for the development and use of programmable electronic systems in marine applications
  • ISO/IEC 17960:2015 Information technology - Programming languages, their environments and system software interfaces - Code signing for source code
  • ISO/IEC TS 17961:2013 Information technology - Programming languages, their environments and system software interfaces - C secure coding rules
  • ISO/IEC 17998:2012 Information technology - SOA Governance Framework

ISO 18000 – ISO 18999

  • ISO/IEC 18000 Information technology – Radio frequency identification for item management
    • ISO/IEC 18000-1 Reference architecture and definition of parameters to be standardized
    • ISO/IEC 18000-2 Parameters for air interface communications below 135 kHz
    • ISO/IEC 18000-3 Parameters for air interface communications at 13,56 MHz
    • ISO/IEC 18000-4 Parameters for air interface communications at 2,45 GHz
    • ISO/IEC 18000-6 Parameters for air interface communications at 860 MHz to 960 MHz
    • ISO/IEC 18000-7 Parameters for active air interface communications at 433 MHz
  • ISO/IEC 18004 Information technology – Automatic identification and data capture techniques – QR Code 2005 bar code symbology specification
  • ISO/IEC 18009:1999 Information technology – Programming languages – Ada: Conformity assessment of a language processor
  • ISO/IEC 18013 Information technology – Personal identification – ISO-compliant driving license
    • ISO/IEC 18013-1:2005 Physical characteristics and basic data set
    • ISO/IEC 18013-2:2008 Machine-readable technologies
    • ISO/IEC 18013-3:2009 Access control, authentication and integrity validation
  • ISO/IEC 18014 Information technology – Security techniques – Time-stamping services
  • ISO/IEC TR 18015:2006 Information technology - Programming languages, their environments and system software interfaces - Technical Report on C++ Performance
  • ISO/IEC TR 18018:2010 Information technology - Systems and software engineering - Guide for configuration management tool capabilities
  • ISO/IEC 18023 Information technology – SEDRIS
  • ISO/IEC 18024-4:2006 Information technology – SEDRIS language bindings – Part 4: C
  • ISO/IEC 18025:2005 Information technology – Environmental Data Coding Specification (EDCS)
  • ISO/IEC 18026 Information technology – Spatial Reference Model (SRM)
  • ISO/IEC 18033 Information technology – Security techniques – Encryption algorithms
    • ISO/IEC 18033-1:2015 Part 1: General
    • ISO/IEC 18033-2:2006 Part 2: Asymmetric ciphers
    • ISO/IEC 18033-3:2010 Part 3: Block ciphers
    • ISO/IEC 18033-4:2011 Part 4: Stream ciphers
    • ISO/IEC 18033-5:2015 Part 5: Identity-based ciphers
  • ISO/IEC TR 18037:2008 Programming languages - C - Extensions to support embedded processors
  • ISO/IEC 18041-4:2016 Information technology – Computer graphics, image processing and environmental data representation – Environmental Data Coding Specification (EDCS) language bindings – Part 4: C
  • ISO/IEC 18042-4:2006 Information technology – Computer graphics and image processing – Spatial Reference Model (SRM) language bindings – Part 4: C
  • ISO/IEC 18092 Information technology – Telecommunications and information exchange between systems – Near Field Communication – Interface and Protocol (NFCIP-1)
  • ISO 18117:2009 Surface chemical analysis – Handling of specimens prior to analysis
  • ISO 18118:2004 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
  • ISO/TS 18152 Ergonomics of human-system interaction – Specification for the process assessment of human-system issues
  • ISO 18185 Freight containers – Electronic seals
  • ISO 18245 Retail financial services – Merchant category codes
  • ISO 18295 Customer contact centres
    • ISO 18295-1:2017 Part 1: Requirements for customer contact centres
    • ISO 18295-2:2017 Part 2: Requirements for clients using the services of customer contact centres
  • ISO 18391:2016 Geometrical product specifications (GPS) - Population specification
  • ISO/IEC 18450:2013 Information technology - Telecommunications and information exchange between systems - Web Services Description Language (WSDL) for CSTA Phase III
  • ISO 18465:2017 Microbiology of the food chain - Quantitative determination of emetic toxin (cereulide) using LC-MS/MS
  • ISO/IEC 18477 Information technology - Scalable compression and coding of continuous-tone still images
    • ISO/IEC 18477-1:2015 Part 1: Scalable compression and coding of continuous-tone still images
    • ISO/IEC 18477-2:2016 Part 2: Coding of high dynamic range images
    • ISO/IEC 18477-3:2015 Part 3: Box file format
    • ISO/IEC 18477-6:2016 Part 6: IDR Integer Coding
    • ISO/IEC 18477-7:2017 Part 7: HDR Floating-Point Coding
    • ISO/IEC 18477-8:2016 Part 8: Lossless and near-lossless coding
    • ISO/IEC 18477-9:2016 Part 9: Alpha channel coding
  • ISO/IEC TS 18508:2015 Information technology - Additional Parallel Features in Fortran
  • ISO/TR 18529:2000 Ergonomics – Ergonomics of human-system interaction – Human-centred lifecycle process descriptions
  • ISO 18541 Road vehicles – Standardized access to automotive repair and maintenance information (RMI)
  • ISO 18587:2017 Translation services - Post-editing of machine translation output - Requirements
  • ISO 18601:2013 Packaging and the environment - General requirements for the use of ISO standards in the field of packaging and the environment
  • ISO 18602:2013 Packaging and the environment—Optimization of the packaging system
  • ISO 18603:2013 Packaging and the environment—Reuse
  • ISO 18604:2013 Packaging and the environment—Material recycling
  • ISO 18605:2013 Packaging and the environment—Energy recovery
  • ISO 18606:2013 Packaging and the environment—Organic recycling
  • ISO/IEC TS 18661 Information technology - Programming languages, their environments, and system software interfaces - Floating-point extensions for C
    • ISO/IEC TS 18661-1:2014 Part 1: Binary floating-point arithmetic
    • ISO/IEC TS 18661-2:2015 Part 2: Decimal floating-point arithmetic
    • ISO/IEC TS 18661-3:2015 Part 3: Interchange and extended types
    • ISO/IEC TS 18661-4:2015 Part 4: Supplementary functions
    • ISO/IEC TS 18661-5:2016 Part 5: Supplementary attributes
  • ISO 18629 Industrial automation systems and integration – Process specification language
  • ISO/IEC TS 18822:2015 Programming languages - C++ - File System Technical Specification

ISO 19000 – ISO 19999

  • ISO 19005 Document management – Electronic document file format for long-term preservation
  • ISO 19011:2011 Guidelines for auditing management systems
  • ISO/IEC TR 19075 Information technology - Database languages - SQL Technical Reports
    • ISO/IEC TR 19075-1:2011 Part 1: XQuery Regular Expression Support in SQL
    • ISO/IEC TR 19075-2:2015 Part 2: SQL Support for Time-Related Information
    • ISO/IEC TR 19075-3:2015 Part 3: SQL Embedded in Programs using the JavaTM programming language
    • ISO/IEC TR 19075-4:2015 Part 4: SQL with Routines and types using the JavaTM programming language
    • ISO/IEC TR 19075-5:2016 Part 5: Row Pattern Recognition in SQL
    • ISO/IEC TR 19075-6:2017 Part 6: SQL support for JavaScript Object Notation (JSON)
    • ISO/IEC TR 19075-7:2017 Part 7: Polymorphic table functions in SQL
  • ISO 19092:2008 Financial services – Biometrics – Security framework
  • ISO 19101 Geographic information – Reference model
  • ISO/TS 19103:2015 Geographic information – Conceptual schema language
  • ISO/TS 19104:2016 Geographic information – Terminology
  • ISO 19105:2000 Geographic information – Conformance and testing
  • ISO 19106:2004 Geographic information – Profiles
  • ISO 19107:2003 Geographic information – Spatial schema
  • ISO 19108:2002 Geographic information – Temporal schema
  • ISO 19109:2015 Geographic information – Rules for application schema
  • ISO 19110:2016 Geographic information – Methodology for feature cataloguing
  • ISO 19111:2007 Geographic information – Spatial referencing by coordinates
  • ISO 19112:2003 Geographic information – Spatial referencing by geographic identifiers
  • ISO 19113:2002 Geographic information – Quality principles [Withdrawn: replaced by ISO 19157:2013]
  • ISO 19114:2003 Geographic information – Quality evaluation procedures [Withdrawn: replaced by ISO 19157:2013]
  • ISO 19115 Geographic information – Metadata
  • ISO 19116:2004 Geographic information – Positioning services
  • ISO 19117:2012 Geographic information – Portrayal
  • ISO 19118:2011 Geographic information – Encoding
  • ISO 19119:2016 Geographic information – Services
  • ISO/TR 19120:2001 Geographic information – Functional standards
  • ISO/TR 19121:2000 Geographic information – Imagery and gridded data
  • ISO/TR 19122:2004 Geographic information / Geomatics – Qualification and certification of personnel
  • ISO 19123:2005 Geographic information – Schema for coverage geometry and functions
  • ISO 19125 Geographic information – Simple feature access
  • ISO 19126:2009 Geographic information – Feature concept dictionaries and registers
  • ISO/TS 19127:2005 Geographic information – Geodetic codes and parameters
  • ISO 19128:2005 Geographic information – Web map server interface
  • ISO/TS 19129:2009 Geographic information – Imagery, gridded and coverage data framework
  • ISO/TS 19130:2010 Geographic information – Imagery sensor models for geopositioning
  • ISO 19131:2007 Geographic information – Data product specifications
  • ISO 19132:2007 Geographic information – Location-based services – Reference model
  • ISO 19133:2005 Geographic information – Location-based services – Tracking and navigation
  • ISO 19134:2007 Geographic information – Location-based services – Multimodal routing and navigation
  • ISO 19135 Geographic information – Procedures for item registration
  • ISO 19136:2007 Geographic information – Geography Markup Language (GML)
  • ISO 19137:2007 Geographic information – Core profile of the spatial schema
  • ISO/TS 19138:2006 Geographic information – Data quality measures [Withdrawn: replaced by ISO 19157:2013]
  • ISO/TS 19139:2007 Geographic information – Metadata – XML schema implementation
  • ISO 19141:2008 Geographic information – Schema for moving features
  • ISO 19142:2010 Geographic information – Web Feature Service
  • ISO 19143:2010 Geographic information – Filter encoding
  • ISO 19144 Geographic information – Classification systems
  • ISO 19145:2013 Geographic information – Registry of representations of geographic point location
  • ISO 19146:2010 Geographic information – Cross-domain vocabularies
  • ISO 19147:2015 Geographic information – Transfer Nodes
  • ISO 19148:2012 Geographic information – Linear referencing
  • ISO 19149:2011 Geographic information – Rights expression language for geographic information - GeoREL
  • ISO 19156 Geographic information - Observations and measurements
  • ISO 19204:2017 Soil quality - Procedure for site-specific ecological risk assessment of soil contamination (soil quality TRIAD approach)
  • ISO/IEC TS 19217:2015 Information technology - Programming languages - C++ Extensions for concepts
  • ISO 19439 Enterprise integration – Framework for enterprise modelling
  • ISO 19440 Enterprise integration – Constructs for enterprise modelling
  • ISO 19467:2017 Thermal performance of windows and doors - Determination of solar heat gain coefficient using solar simulator
  • ISO/IEC 19500 Information technology - Object Management Group - Common Object Request Broker Architecture (CORBA)
    • ISO/IEC 19500-1:2012 Part 1: Interfaces
    • ISO/IEC 19500-2:2012 Part 2: Interoperability
    • ISO/IEC 19500-3:2012 Part 3: Components
  • ISO/IEC 19501 Information technology – Open Distributed Processing – Unified Modeling Language (UML) Version 1.4.2
  • ISO/IEC 19502 Information technology – Meta Object Facility (MOF)
  • ISO/IEC 19503 Information technology – XML Metadata Interchange (XMI)
  • ISO/IEC 19505 Information technology - Object Management Group Unified Modeling Language (OMG UML)
    • ISO/IEC 19505-1:2012 Part 1: Infrastructure
    • ISO/IEC 19505-2:2012 Part 2: Superstructure
  • ISO/IEC 19506:2012 Information technology -- Object Management Group Architecture-Driven Modernization (ADM) - Knowledge Discovery Meta-Model (KDM)
  • ISO/IEC 19507:2012 Information technology - Object Management Group Object Constraint Language (OCL)
  • ISO/IEC 19514:2017 Information technology - Object management group systems modeling language (OMG SysML)
  • ISO/IEC TR 19566 Information technology - JPEG Systems
    • ISO/IEC TR 19566-1:2016 Part 1: Packaging of information using codestreams and file formats
    • ISO/IEC TR 19566-2:2016 Part 2: Transport mechanisms and packaging
  • ISO/IEC TS 19568:2017 Programming Languages - C++ Extensions for Library Fundamentals
  • ISO/IEC TS 19570:2015 Programming Languages - Technical Specification for C++ Extensions for Parallelism
  • ISO/IEC TS 19571:2016 Programming Languages - Technical specification for C++ extensions for concurrency
  • ISO 19600 Compliance management systems - Guidelines
  • ISO/IEC 19678:2015 Information Technology - BIOS Protection Guidelines
  • ISO/IEC 19752 Information technology – Method for the determination of toner cartridge yield for monochromatic electrophotographic printers and multi-function devices that contain printer components
  • ISO/IEC TR 19755:2003 Information technology - Programming languages, their environments and system software interfaces - Object finalization for programming language COBOL
  • ISO/IEC 19756:2011 Information technology - Topic Maps - Constraint Language (TMCL)
  • ISO/IEC 19757 Information technology – Document Schema Definition Languages (DSDL)
  • ISO/IEC TR 19758:2003 Information technology - Document description and processing languages - DSSSL library for complex compositions
  • ISO/IEC TR 19759:2015 Software Engineering - Guide to the software engineering body of knowledge (SWEBOK)
  • ISO/IEC 19761:2011 Software engineering - COSMIC: a functional size measurement method
  • ISO/IEC TR 19768:2007 Information technology - Programming languages - Technical Report on C++ Library Extensions
  • ISO/IEC 19770 Information technology – Software asset management
  • ISO/IEC 19785 Information technology – Common Biometric Exchange Formats Framework
  • ISO/IEC 19788 Information technology – Learning, education and training – Metadata for learning resources
  • ISO/IEC 19790 Information technology – Security techniques – Security requirements for cryptographic modules
  • ISO/IEC 19793 Information technology - Open Distributed Processing—Use of UML for ODP system specifications
  • ISO/IEC 19794 Information technology – Biometric data interchange formats
    • ISO/IEC 19794-1:2011 Framework
    • ISO/IEC 19794-2:2005 Finger minutiae data
    • ISO/IEC 19794-3:2006 Finger pattern spectral data
    • ISO/IEC 19794-4:2005 Finger image data
    • ISO/IEC 19794-5:2005 Face image data
    • ISO/IEC 19794-6:2005 Iris image data
    • ISO/IEC 19794-7:2007 Signature/sign time series data
    • ISO/IEC 19794-8:2006 Finger pattern skeletal data
    • ISO/IEC 19794-9:2007 Vascular image data
    • ISO/IEC 19794-10:2007 Hand geometry silhouette data
  • ISO/IEC TS 19841:2015 Technical Specification for C++ Extensions for Transactional Memory
  • ISO 19993 Timber structures—Glued laminated timber—Face and edge joint cleavage test

ISO 20000 – ISO 20999

  • ISO/IEC 20000 Information technology – Service management
  • ISO 20022 Financial services – UNIversal Financial Industry message scheme
  • ISO 20072 Aerosol drug delivery device design verification—Requirements and test methods
  • ISO/IEC 20246:2017 Software and systems engineering - Work product reviews
  • ISO 20252 Market, opinion and social research — Vocabulary and service requirements
  • ISO/TS 20282 Usability of consumer products and products for public use
  • ISO 20400:2017 Sustainable procurement - Guidance
  • ISO 20519:2017 Ships and marine technology - Specification for bunkering of liquefied natural gas fuelled vessels
  • ISO 20653 Road vehicles - Degrees of protection (IP-Code) - Protection of electrical equipment against foreign objects, water and access
  • ISO 20669:2017 Non-destructive testing - Pulsed eddy current testing of ferromagnetic metallic components
  • ISO 20700 Guidelines for management consultancy services
  • ISO/IEC 20741:2017 Systems and software engineering - Guideline for the evaluation and selection of software engineering tools
  • ISO 20815 Petroleum, petrochemical and natural gas industries - Production assurance and reliability management
  • ISO/IEC 20926:2009 Software and systems engineering - Software measurement - IFPUG functional size measurement method 2009
  • ISO/IEC TR 20943 Information technology – Procedures for achieving metadata registry content consistency
    • ISO/IEC TR 20943-1:2003 Data elements
    • ISO/IEC TR 20943-3:2004 Value domains
  • ISO/IEC 20968:2002 Software engineering - Mk II Function Point Analysis - Counting Practices Manual
  • ISO/IEC 20970:2002 Information technology - Programming languages, their environments and system software interfaces - JEFF file format

ISO 21000 – ISO 21999

  • ISO/IEC 21000 Information technology – Multimedia framework (MPEG-21)
  • ISO 21047:2009 Information and documentation - International Standard Text Code (ISTC)
  • ISO 21298:2017 Health informatics - Functional and structural roles
  • ISO/IEC 21481 Information technology – Telecommunications and information exchange between systems – Near Field Communication Interface and Protocol -2 (NFCIP-2)
  • ISO 21482 Ionizing-radiation warning – Supplementary symbol
  • ISO 21500 Guidance on project management
  • ISO 21505:2017 Project, programme and portfolio management - Guidance on governance
  • ISO 21528 Microbiology of the food chain - Horizontal method for the detection and enumeration of Enterobacteriaceae
    • ISO 21528-1:2017 Part 1: Detection of Enterobacteriaceae
    • ISO 21528-2:2017 Part 2: Colony-count technique
  • ISO 21748:2017 Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty evaluation

ISO 22000 – ISO 22999

  • ISO 22000:2005 Food safety management systems – Requirements for any organization in the food chain
  • ISO/TS 22002 Prerequisite programmes on food safety
    • ISO/TS 22002-1:2009 Part 1: Food manufacturing
    • ISO/TS 22002-2:2013 Part 2: Catering
    • ISO/TS 22002-3:2011 Part 3: Farming
    • ISO/TS 22002-4:2013 Part 4: Food packaging manufacturing
    • ISO/TS 22002-6:2016 Part 6: Feed and animal food production
  • ISO/TS 22003:2013 Food safety management systems – Requirements for bodies providing audit and certification of food safety management systems
  • ISO 22004:2014 Food safety management systems – Guidance on the application of ISO 22000
  • ISO 22005:2007 Traceability in the feed and food chain – General principles and basic requirements for system design and implementation
  • ISO 22006:2009 Quality management systems - Guidelines for the application of ISO 9001:2008 to crop production)
  • ISO 22093 Industrial automation systems and integration – Physical device control – Dimensional Measuring Interface Standard (DMIS)
  • ISO 22222 Personal financial planning -- Requirements for personal financial planners
  • ISO 22241 Diesel engines – NOx reduction agent AUS 32
    • ISO 22241-1 Quality requirements
    • ISO 22241-2 Test methods
    • ISO 22241-3 Handling, transportation and storing
  • ISO/IEC TR 22250 Information technology – Document description and processing languages – Regular Language Description for XML (RELAX)
    • ISO/IEC TR 22250-1:2002 RELAX Core
  • ISO 22301:2012 Societal security – Business continuity management systems – Requirements
  • ISO 22316:2017 Security and resilience - Organizational resilience -- Principles and attributes
  • ISO 22319:2017 Security and resilience - Community resilience - Guidelines for planning the involvement of spontaneous volunteers
  • ISO/PAS 22399:2007 Societal security – Guideline for incident preparedness and operational continuity management
  • ISO 22412:2017 Particle size analysis - Dynamic light scattering (DLS)
  • ISO 22432:2011 Geometrical product specifications (GPS) - Features utilized in specification and verification
  • ISO/IEC 22537:2006 Information technology - ECMAScript for XML (E4X) specification
  • ISO 22716:2007 Cosmetics – Good Manufacturing Practices (GMP) – Guidelines on Good Manufacturing Practices
  • ISO 22964:2017 Microbiology of the food chain - Horizontal method for the detection of Cronobacter spp.

ISO 23000 – ISO 23999

  • ISO/IEC 23000 Information technology - Multimedia application format (MPEG-A)
  • ISO/IEC 23001 Information technology – MPEG systems technologies
    • ISO/IEC 23001-1:2006 Part 1: Binary MPEG format for XML
    • ISO/IEC 23001-2:2008 Part 2: Fragment request units
    • ISO/IEC 23001-3:2008 Part 3: XML IPMP messages
    • ISO/IEC 23001-4:2017 Part 4: Codec configuration representation
    • ISO/IEC 23001-5:2008 Part 5: Bitstream Syntax Description Language (BSDL)
    • ISO/IEC 23001-7:2016 Part 7: Common encryption in ISO base media file format
    • ISO/IEC 23001-8:2016 Part 8: Coding-independent code points
    • ISO/IEC 23001-9:2016 Part 9: Common encryption of MPEG-2 transport streams
    • ISO/IEC 23001-10:2015 Part 10: Carriage of timed metadata metrics of media in ISO base media file format
    • ISO/IEC 23001-12:2015 Part 12: Sample Variants in the ISO base media file format
  • ISO/IEC 23002 Information technology – MPEG video technologies
  • ISO/IEC 23003 Information technology – MPEG audio technologies
  • ISO/IEC 23008 Information technology - High efficiency coding and media delivery in heterogeneous environments
  • ISO/IEC/IEEE 23026:2015 Systems and software engineering - Engineering and management of websites for systems, software, and services information
  • ISO/IEC 23270:2006 Information technology – Programming languages – C#
  • ISO/IEC 23271:2012 Information technology – Common Language Infrastructure (CLI)
  • ISO/IEC TR 23272:2011 Information technology - Common Language Infrastructure (CLI) - Information Derived from Partition IV XML File
  • ISO/IEC 23360 Linux Standard Base (LSB) core specification 3.1
    • ISO/IEC 23360-1 Generic specification
    • ISO/IEC 23360-2 Specification for IA32 architecture
    • ISO/IEC 23360-3 Specification for IA64 architecture
    • ISO/IEC 23360-4 Specification for AMD64 architecture
    • ISO/IEC 23360-5 Specification for PPC32 architecture
    • ISO/IEC 23360-6 Specification for PPC64 architecture
    • ISO/IEC 23360-7 Specification for S390 architecture
    • ISO/IEC 23360-8 Specification for S390X architecture
  • ISO 23733 Textiles – Chenille yarns – Test method for the determination of linear density
  • ISO 23950 Information and documentation – Information retrieval (Z39.50) – Application service definition and protocol specification

ISO 24000 – ISO 24999

  • ISO 24517 Document management - Engineering document format using PDF
    • ISO 24517-1:2008 Part 1: Use of PDF 1.6 (PDF/E-1)
  • ISO/IEC 24570:2005 Software engineering - NESMA functional size measurement method version 2.1 - Definitions and counting guidelines for the application of Function Point Analysis
  • ISO 24613:2008 Language resource management - Lexical markup framework (LMF)
  • ISO 24614 Language resource management - Word segmentation of written texts
    • ISO 24614-1:2010 Part 1: Basic concepts and general principles
    • ISO 24614-2:2011 Part 2: Word segmentation for Chinese, Japanese and Korean
  • ISO 24624:2016 Language resource management - Transcription of spoken language
  • ISO/IEC 24707:2007 Information technology – Common Logic (CL): a framework for a family of logic-based languages
  • ISO/IEC TR 24715:2006 Information technology - Programming languages, their environments and system software interfaces - Technical Report on the Conflicts between the ISO/IEC 9945 (POSIX) and the Linux Standard Base (ISO/IEC 23360)
  • ISO/IEC TR 24716:2007 Information technology - Programming languages, their environment and system software interfaces - Native COBOL Syntax for XML Support
  • ISO/IEC TR 24717:2009 Information technology - Programming languages, their environments and system software interfaces - Collection classes for programming language COBOL
  • ISO/IEC TR 24718:2005 Information technology - Programming languages - Guide for the use of the Ada Ravenscar Profile in high integrity systems
  • ISO/IEC 24727 Identification cards – Integrated circuit card programming interfaces
    • ISO/IEC 24727-1 Architecture
    • ISO/IEC 24727-2 Generic card interface
    • ISO/IEC 24727-3 Application interface
    • ISO/IEC 24727-4 Application programming interface (API) administration
    • ISO/IEC 24727-5 Testing procedures
    • ISO/IEC 24727-6 Registration authority procedures for the authentication protocols for interoperability
  • ISO/IEC TR 24731 Information technology - Programming languages, their environments and system software interfaces - Extensions to the C library
    • ISO/IEC TR 24731-1:2007 Part 1: Bounds-checking interfaces
    • ISO/IEC TR 24731-2:2010 Part 2: Dynamic Allocation Functions
  • ISO/IEC TR 24732:2009 Information technology - Programming languages, their environments and system software interfaces - Extension for the programming language C to support decimal floating-point arithmetic
  • ISO/IEC TR 24733:2011 Information technology - Programming languages, their environments and system software interfaces - Extensions for the programming language C++ to support decimal floating-point arithmetic
  • ISO/IEC 24744:2014 Software Engineering – Metamodel for Development Methodologies
  • ISO/IEC 24747:2009 Information technology - Programming languages, their environments and system software interfaces - Extensions to the C Library to support mathematical special functions
  • ISO/IEC 24748 Systems and software engineering - Life cycle management
    • ISO/IEC TS 24748-1:2016 Part 1: Guidelines for life cycle
    • ISO/IEC TR 24748-2:2011 Part 2: Guide to the application of ISO/IEC 15288 (System life cycle processes)
    • ISO/IEC TR 24748-3:2011 Part 3: Guide to the application of ISO/IEC 12207 (Software life cycle processes)
    • ISO/IEC/IEEE 24748-4:2016 Part 4: Systems engineering planning
    • ISO/IEC/IEEE 24748-5:2017 Part 5: Software development planning
    • ISO/IEC TS 24748-6:2016 Part 6: System integration engineering
  • ISO/IEC 24762:2008 Information technology – Security techniques – Guidelines for information and communications technology disaster recovery services
  • ISO/IEC/IEEE 24765:2010 Systems and software engineering - Vocabulary
  • ISO/IEC TR 24766:2009 Information technology - Systems and software engineering - Guide for requirements engineering tool capabilities
  • ISO/IEC TR 24772:2013 Information technology - Programming languages - Guidance to avoiding vulnerabilities in programming languages through language selection and use
  • ISO/IEC 24773:2008 Software engineering - Certification of software engineering professionals - Comparison framework
  • ISO/IEC TR 24774:2010 Systems and software engineering - Life cycle management - Guidelines for process description
  • ISO/IEC 24800 Information technology - JPSearch
    • ISO/IEC 24800-2:2011 Part 2: Registration, identification and management of schema and ontology
    • ISO/IEC 24800-3:2010 Part 3: Query format
    • ISO/IEC 24800-4:2010 Part 4: File format for metadata embedded in image data (JPEG and JPEG 2000)
    • ISO/IEC 24800-5:2011 Part 5: Data interchange format between image repositories
    • ISO/IEC 24800-6:2012 Part 6: Reference software
  • ISO 24803:2017 Recreational diving services - Requirements for recreational diving providers

ISO 25000 – ISO 25999

  • ISO/IEC 25000:2014 Systems and software engineering - Systems and software Quality Requirements and Evaluation (SQuaRE) - Guide to SQuaRE
  • ISO/IEC 25001:2014 Systems and software engineering - Systems and software Quality Requirements and Evaluation (SQuaRE) - Planning and management
  • ISO/IEC 25010:2011 Systems and software engineering - Systems and software Quality Requirements and Evaluation (SQuaRE) - System and software quality models
  • ISO/IEC TS 25011:2017 Information technology - Systems and software quality requirements and evaluation (SQuaRE) - Service quality models
  • ISO/IEC 25012:2008 Software engineering - Software product Quality Requirements and Evaluation (SQuaRE) - Data quality model
  • ISO/IEC 25020:2007 Software engineering - Software product Quality Requirements and Evaluation (SQuaRE) - Measurement reference model and guide
  • ISO/IEC 25021:2012 Systems and software engineering - Systems and software Quality Requirements and Evaluation (SQuaRE) - Quality measure elements
  • ISO/IEC 25022:2016 Systems and software engineering - Systems and software quality requirements and evaluation (SQuaRE) - Measurement of quality in use
  • ISO/IEC 25023:2016 Systems and software engineering - Systems and software Quality Requirements and Evaluation (SQuaRE) - Measurement of system and software product quality
  • ISO/IEC 25024:2015 Systems and software engineering - Systems and software Quality Requirements and Evaluation (SQuaRE) - Measurement of data quality
  • ISO/IEC 25030:2007 Software engineering - Software product Quality Requirements and Evaluation (SQuaRE) - Quality requirements
  • ISO/IEC 25040:2011 Systems and software engineering - Systems and software Quality Requirements and Evaluation (SQuaRE) - Evaluation process
  • ISO/IEC 25041:2012 Systems and software engineering - Systems and software Quality Requirements and Evaluation (SQuaRE) - Evaluation guide for developers, acquirers and independent evaluators
  • ISO/IEC 25045:2010 Systems and software engineering - Systems and software Quality Requirements and Evaluation (SQuaRE) - Evaluation module for recoverability
  • ISO/IEC 25051:2014 Software engineering - Systems and software Quality Requirements and Evaluation (SQuaRE) - Requirements for quality of Ready to Use Software Product (RUSP) and instructions for testing
  • ISO/IEC TR 25060:2010 Systems and software engineering - Systems and software product Quality Requirements and Evaluation (SQuaRE) - Common Industry Format (CIF) for usability: General framework for usability-related information
  • ISO/IEC 25062:2006 Software engineering - Software product Quality Requirements and Evaluation (SQuaRE) - Common Industry Format (CIF) for usability test reports
  • ISO/IEC 25063:2014 Systems and software engineering - Systems and software product Quality Requirements and Evaluation (SQuaRE) - Common Industry Format (CIF) for usability: Context of use description
  • ISO/IEC 25064:2013 Systems and software engineering - Software product Quality Requirements and Evaluation (SQuaRE) - Common Industry Format (CIF) for usability: User needs report
  • ISO/IEC 25066:2016 Systems and software engineering - Systems and software Quality Requirements and Evaluation (SQuaRE) - Common Industry Format (CIF) for Usability -- Evaluation Report
  • ISO 25178 Geometrical product specifications (GPS) – Surface texture: Areal
  • ISO 25237:2017 Health informatics - Pseudonymization
  • ISO 25378:2011 Geometrical product specifications (GPS) - Characteristics and conditions -- Definitions
  • ISO/IEC 25436:2006 Information technology - Eiffel: Analysis, Design and Programming Language
  • ISO/IEC TR 25438:2006 Information technology - Common Language Infrastructure (CLI) - Technical Report: Common Generics
  • ISO 25539 Cardiovascular implants - Endovascular devices
    • ISO 25539-1:2017 Part 1: Endovascular prostheses
    • ISO 25539-2:2012 Part 2: Vascular stents
    • ISO 25539-3:2011 Part 3: Vena cava filters
  • ISO 25964 Information and documentation - Thesauri and interoperability with other vocabularies

ISO 26000 – ISO 26999

  • ISO 26000 Guidance on social responsibility
  • ISO/IEC 26300 Information technology – Open Document Format for Office Applications (OpenDocument) v1.0
  • ISO 26324:2012 Information and documentation - Digital object identifier system
  • ISO/IEC/IEEE 26511:2011 Systems and software engineering - Requirements for managers of user documentation
  • ISO/IEC/IEEE 26512:2011 Systems and software engineering - Requirements for acquirers and suppliers of user documentation
  • ISO/IEC 26513:2009 Systems and software engineering - Requirements for testers and reviewers of user documentation
  • ISO/IEC 26514:2008 Systems and software engineering - Requirements for designers and developers of user documentation
  • ISO/IEC/IEEE 26515:2011 Systems and software engineering - Developing user documentation in an agile environment
  • ISO/IEC/IEEE 26531:2015 Systems and software engineering - Content management for product life-cycle, user and service management documentation
  • ISO/IEC 26550:2015 Software and systems engineering - Reference model for product line engineering and management
  • ISO/IEC 26551:2016 Software and systems engineering - Tools and methods for product line requirements engineering
  • ISO/IEC 26555:2015 Software and systems engineering - Tools and methods for product line technical management
  • ISO/IEC 26557:2016 Software and systems engineering - Methods and tools for variability mechanisms in software and systems product line
  • ISO/IEC 26558:2017 Software and systems engineering - Methods and tools for variability modelling in software and systems product line
  • ISO/IEC 26559:2017 Software and systems engineering - Methods and tools for variability traceability in software and systems product line

ISO 27000 – ISO 27999

  • ISO/IEC 27000 Information technology – Security techniques – Information security management systems – Overview and vocabulary
  • ISO/IEC 27001 Information technology – Security techniques – Information security management systems – Requirements
  • ISO/IEC 27002 Information technology – Security techniques – Code of practice for information security management
  • ISO/IEC 27003 Information technology – Security techniques – Information security management system implementation guidance
  • ISO/IEC 27004 Information technology – Security techniques – Information security management – Measurement
  • ISO/IEC 27005 Information technology – Security techniques – Information security risk management
  • ISO/IEC 27006 Information technology – Security techniques – Requirements for bodies providing audit and certification of information security management systems
  • ISO/IEC 27011 Information technology – Security techniques – Information security management guidelines for telecommunications organizations based on ISO/IEC 27002
  • ISO/IEC 27037:2012 Information technology – Security techniques – Guidelines for identification, collection, acquisition and preservation of digital evidence
  • ISO/TS 27687:2008 Nanotechnologies – Terminology and definitions for nano-objects – Nanoparticle, nanofibre and nanoplate
  • ISO 27729:2012 Information and documentation - International standard name identifier (ISNI)
  • ISO 27799:2008 Health informatics—Information security management in health using ISO/IEC 27002

ISO 28000 – ISO 28999

  • ISO 28000 Specification for security management systems for the supply chain
  • ISO 28001:2007 Security management systems for the supply chain – Best practices for implementing supply chain security, assessments and plans – Requirements and guidance
  • ISO 28003 Security management systems for the supply chain – Requirements for bodies providing audit and certification of supply chain security management systems
  • ISO 28004 Security management systems for the supply chain – Guidelines for the implementation of ISO 28000
  • ISO/PAS 28007:2012 Ships and marine technology—Guidelines for Private Maritime Security Companies (PMSC) providing privately contracted armed security personnel (PCASP) on board ships (and pro forma contract) [Withdrawn: replaced by ISO 28007-1:2015]
  • ISO 28007 Ships and marine technology - Guidelines for Private Maritime Security Companies (PMSC) providing privately contracted armed security personnel (PCASP) on board ships (and pro forma contract)
    • ISO 28007-1:2015 Part 1: General
  • ISO 28300:2008 Petroleum, petrochemical and natural gas industries – Venting of atmospheric and low-pressure storage tanks

ISO 29000 – ISO 29999

  • ISO/IEC 29110 Systems and software engineering - Lifecycle profiles for Very Small Entities (VSEs)[Note 3]
    • ISO/IEC TR 29110-1:2016 Part 1: Overview
    • ISO/IEC 29110-2-1:2015 Part 2-1: Framework and taxonomy
    • ISO/IEC TR 29110-2-2:2016 Part 2-2: Guide for the development of domain-specific profiles
    • ISO/IEC TR 29110-3-1:2015 Part 3-1: Assessment guide
    • ISO/IEC 29110-3-3:2016 Part 3-3: Certification requirements for conformity assessments of VSE profiles using process assessment and maturity models
    • ISO/IEC TR 29110-3-4:2015 Part 3-4: Autonomy-based improvement method
    • ISO/IEC 29110-4-1:2011 Part 4-1: Profile specifications: Generic profile group
    • ISO/IEC TR 29110-5-1-1:2012 Part 5-1-1: Management and engineering guide: Generic profile group: Entry profile
    • ISO/IEC TR 29110-5-1-2:2011 Part 5-1-2: Management and engineering guide: Generic profile group: Basic profile
    • ISO/IEC TR 29110-5-1-3:2017 Part 5-1-3: Software engineering - Management and engineering guide: Generic profile group - Intermediate profile
    • ISO/IEC TR 29110-5-2-1:2016 Part 5-2-1: Organizational management guidelines
    • ISO/IEC TR 29110-5-6-1:2015 Part 5-6-1: Systems engineering - Management and engineering guide: Generic profile group: Entry profile
    • ISO/IEC TR 29110-5-6-2:2014 Part 5-6-2: Systems engineering - Management and engineering guide: Generic profile group: Basic profile
  • ISO/IEC TS 29113:2012 Information technology - Further interoperability of Fortran with C
  • ISO/IEC 29119 Software and systems engineering – Software testing
  • ISO/IEC 29124:2010 Information technology - Programming languages, their environments and system software interfaces - Extensions to the C++ Library to support mathematical special functions
  • ISO/IEC 29134:2017 Information technology - Security techniques - Guidelines for privacy impact assessment
  • ISO/IEC/IEEE 29148:2011 Systems and software engineering - Life cycle processes - Requirements engineering
  • ISO/IEC TR 29154:2013 Software engineering - Guide for the application of ISO/IEC 24773:2008 (Certification of software engineering professionals - Comparison framework)
  • ISO/IEC 29155 Systems and software engineering - Information technology project performance benchmarking framework
    • ISO/IEC 29155-1:2011 Part 1: Concepts and definitions
    • ISO/IEC 29155-2:2013 Part 2: Requirements for benchmarking
    • ISO/IEC 29155-3:2015 Part 3: Guidance for reporting
    • ISO/IEC 29155-4:2016 Part 4: Guidance for data collection and maintenance
  • ISO/IEC TR 29166:2011 Information technology - Document description and processing languages - Guidelines for translation between ISO/IEC 26300 and ISO/IEC 29500 document formats
  • ISO/IEC 29168 Information technology - Open systems interconnection
    • ISO/IEC 29168-1:2011 Part 1: Object identifier resolution system
    • ISO/IEC 29168-2:2011 Part 2: Procedures for the object identifier resolution system operational agency
  • ISO/IEC 29169:2016 Information technology - Process assessment - Application of conformity assessment methodology to the assessment to process quality characteristics and organizational maturity
  • ISO/IEC 29170 Information technology - Advanced image coding and evaluation
    • ISO/IEC 29170-2:2015 Part 2: Evaluation procedure for nearly lossless coding
  • ISO/IEC 29199 Information technology - JPEG XR image coding system
    • ISO/IEC TR 29199-1:2011 Part 1: System architecture
    • ISO/IEC 29199-2:2012 Part 2: Image coding specification
    • ISO/IEC 29199-3:2010 Part 3: Motion JPEG XR
    • ISO/IEC 29199-4:2010 Part 4: Conformance testing
    • ISO/IEC 29199-5:2012 Part 5: Reference software
  • ISO/IEC 29500 Information technology – Document description and processing languages – Office Open XML File Formats
    • ISO/IEC 29500-1:2016 Part 1: Fundamentals and Markup Language Reference
    • ISO/IEC 29500-2:2012 Part 2: Open Packaging Conventions
    • ISO/IEC 29500-3:2015 Part 3: Markup Compatibility and Extensibility
    • ISO/IEC 29500-4:2016 Part 4: Transitional Migration Features
  • ISO/IEC 29881:2010 Information technology - Systems and software engineering - FiSMA 1.1 functional size measurement method

ISO 30000 – ISO 39999

  • ISO 30000:2009 Ships and marine technology – Ship recycling management systems – Specifications for management systems for safe and environmentally sound ship recycling facilities
  • ISO/IEC TS 30103:2015 Software and Systems Engineering - Lifecycle Processes - Framework for Product Quality Achievement
  • ISO/IEC 30105 Information technology - IT Enabled Services-Business Process Outsourcing (ITES-BPO) lifecycle processes
    • ISO/IEC 30105-1:2016 Part 1: Process reference model (PRM)
    • ISO/IEC 30105-2:2016 Part 2: Process assessment model (PAM)
    • ISO/IEC 30105-3:2016 Part 3: Measurement framework (MF) and organization maturity model (OMM)
    • ISO/IEC 30105-4:2016 Part 4: Terms and concepts
    • ISO/IEC 30105-5:2016 Part 5: Guidelines
  • ISO/IEC TR 30114 Information technology - Extensions of Office Open XML file formats
    • ISO/IEC TR 30114-1:2016 Part 1: Guidelines
  • ISO/IEC 30121:2015 Information technology - Governance of digital forensic risk framework
  • ISO/IEC 30130:2016 Software engineering - Capabilities of software testing tools
  • ISO/IEC TS 30135 Information technology - Digital publishing - EPUB3
    • ISO/IEC TS 30135-1:2014 Part 1: EPUB3 Overview
    • ISO/IEC TS 30135-2:2014 Part 2: Publications
    • ISO/IEC TS 30135-3:2014 Part 3: Content Documents
    • ISO/IEC TS 30135-4:2014 Part 4: Open Container Format
    • ISO/IEC TS 30135-5:2014 Part 5: Media Overlay
    • ISO/IEC TS 30135-6:2014 Part 6: EPUB Canonical Fragment Identifier
    • ISO/IEC TS 30135-7:2014 Part 7: EPUB3 Fixed-Layout Documents
  • ISO/IEC 30170:2012 Information technology – Programming languages – Ruby
  • ISO/IEC 30182:2017 Smart city concept model - Guidance for establishing a model for data interoperability
  • ISO 31000:2009 Risk management – Principles and guidelines
  • ISO/IEC 31010:2009 Risk management - Risk assessment techniques
  • ISO/IEC/IEEE 31320 Information technology - Modeling Languages
    • ISO/IEC/IEEE 31320-1:2012 Part 1: Syntax and Semantics for IDEF0
    • ISO/IEC/IEEE 31320-2:2012 Part 2: Syntax and Semantics for IDEF1X97 (IDEFobject)
  • ISO 32000 Document management – Portable document format
  • ISO/IEC 33001:2015 Information technology - Process assessment - Concepts and terminology
  • ISO/IEC 33002:2015 Information technology - Process assessment - Requirements for performing process assessment
  • ISO/IEC 33003:2015 Information technology - Process assessment - Requirements for process measurement frameworks
  • ISO/IEC 33004:2015 Information technology - Process assessment - Requirements for process reference, process assessment and maturity models
  • ISO/IEC TR 33014:2013 Information technology - Process assessment - Guide for process improvement
  • ISO/IEC 33020:2015 Information technology - Process assessment - Process measurement framework for assessment of process capability
  • ISO/IEC TS 33030:2017 Information technology - Process assessment - An exemplar documented assessment process
  • ISO/IEC TS 33052:2016 Information technology - Process reference model (PRM) for information security management
  • ISO/IEC 33063:2015 Information technology - Process assessment - Process assessment model for software testing
  • ISO/IEC TS 33072:2016 Information technology - Process assessment - Process capability assessment model for information security management
  • ISO 37001 Anti-bribery management systems
  • ISO 37120 Sustainable development of communities - Indicators for city services and quality of life
  • ISO/IEC 38500:2008 Corporate governance of information technology
  • ISO 39001:2012 Road traffic safety (RTS) management systems - Requirements with guidance for use

ISO 40000 – ISO 49999

  • ISO/IEC 40210:2011 Information technology - W3C SOAP Version 1.2 Part 1: Messaging Framework (Second Edition)
  • ISO/IEC 40220:2011 Information technology - W3C SOAP Version 1.2 Part 2: Adjuncts (Second Edition)
  • ISO/IEC 40230:2011 Information technology - W3C SOAP Message Transmission Optimization Mechanism
  • ISO/IEC 40240:2011 Information technology - W3C Web Services Addressing 1.0 - Core
  • ISO/IEC 40250:2011 Information technology - W3C Web Services Addressing 1.0 - SOAP Binding
  • ISO/IEC 40260:2011 Information technology - W3C Web Services Addressing 1.0 - Metadata
  • ISO/IEC 40270:2011 Information technology - W3C Web Services Policy 1.5 - Framework
  • ISO/IEC 40280:2011 Information technology - W3C Web Services Policy 1.5 - Attachment
  • ISO/IEC 40500:2012 Information technology – W3C Web Content Accessibility Guidelines (WCAG) 2.0
  • ISO/DIS 45001.2 Occupational health and safety management systems - Requirements with guidance for use [Under development]
  • ISO 41012:2017 Facility management - Guidance on strategic sourcing and the development of agreements
  • ISO/TR 41013:2017 Facility management - Scope, key concepts and benefits
  • ISO/IEC 42010:2011 Systems and software engineering – Architecture description
  • ISO 44001:2017 Collaborative business relationship management systems — Requirements and framework

ISO 50000 - ISO 59999

  • ISO 50001:2011 Energy management systems – Requirements with guidance for use
  • ISO 50002:2014 Energy audits – Requirements with guidance for use
  • ISO 50003:2014 Energy management systems – Requirements for bodies providing audit and certification of energy management systems
  • ISO 50004:2014 Energy management systems – Guidance for the implementation, maintenance and improvement of an energy management system
  • ISO 50006:2014 Energy management systems – Measuring energy performance using energy baselines (EnB) and energy performance indicators (EnPI) – General principles and guidance
  • ISO 50015:2014 Energy management systems – Measurement and verification of energy performance of organizations—General principles and guidance
  • ISO 50047:2016 Energy savings – Determination of energy savings in organizations
  • ISO 55000:2014 Asset management – Overview, principles and terminology
  • ISO 55001:2014 Asset management – Management systems – Requirements
  • ISO 55002:2014 Asset management – Management systems – Guidelines for the application of ISO 55001

ISO 60000 - ISO 69999

  • ISO/IEC/IEEE 60559:2011 Information technology - Microprocessor Systems - Floating-Point arithmetic

ISO 80000 - ISO 89999

  • ISO/IEC 80000 Quantities and units
  • IEC/TR 80002 Medical device software
    • IEC/TR 80002-1:2009 Part 1: Guidance on the application of ISO 14971 to medical device software
    • ISO/TR 80002-2:2017 Part 2: Validation of software for medical device quality systems
    • IEC/TR 80002-3:2014 Part 3: Process reference model of medical device software life cycle processes (IEC 62304)
  • ISO/TS 80004 Nanotechnologies – Vocabulary
    • ISO/TS 80004-1 Core terms
    • ISO/TS 80004-3 Carbon nano-objects
    • ISO/TS 80004-4 Nanostructured materials
    • ISO/TS 80004-5 Nano/bio interface
    • ISO/TS 80004-7 Diagnostics and therapeutics for healthcare

ISO 90000 - ISO 99999

  • ISO/IEC 90003:2014 Software engineering - Guidelines for the application of ISO 9001:2008 to computer software
  • ISO/IEC TR 90005:2008 Systems engineering - Guidelines for the application of ISO 9001 to system life cycle processes
  • ISO/IEC TR 90006:2013 Information technology - Guidelines for the application of ISO 9001:2008 to IT service management and its integration with ISO/IEC 20000-1:2011

See also

Notes

  1. ^ This list generally excludes draft versions.
  2. ^ ISO deliverables include "specifications" (ISO/PAS, ISO/TS), "reports" (ISO/TR), etc, which are not referred to by ISO as "standards".
  3. ^ a b c d e f g h i j k l m n o The exact wording of this title varies between parts. This is the wording of the most recently published part.

References

External links

Text is available under the Creative Commons Attribution-ShareAlike License; additional terms may apply. By using this site, you agree to the Terms of Use and Privacy Policy. Wikipedia is a registered trademark of the Wikimedia Foundation, Inc., a non-profit organization.

Also On Wow

    Advertisement

    Trending Now