Close menu


Updated: 2017-02-21T17:08Z

In chemistry, a mixture is a material made up of two or more different substances which are mixed but are not combined chemically. A mixture refers to the physical combination of two or more substances in which the identities are retained and are mixed in the form of solutions, suspensions, and colloids.[1][2]

Mixtures are the one product of a mechanical blending or mixing of chemical substances such as elements and compounds, without chemical bonding or other chemical change, so that each ingredient substance retains its own chemical properties and makeup.[3] Despite that there are no chemical changes to its constituents, the physical properties of a mixture, such as its melting point, may differ from those of the components. Some mixtures can be separated into their components by physical (mechanical or thermal) means. Azeotropes are one kind of mixture that usually pose considerable difficulties regarding the separation processes required to obtain their constituents (physical or chemical processes or, even a blend of them).[4][5][6]

Types of mixture

Mixtures can be either homogeneous or heterogeneous. A homogeneous mixture is a type of mixture in which the composition is uniform and every part of the solution has the same properties. Examples of homogenous mixture is Alloys, Alcohol in water, etc... A heterogeneous mixture is a type of mixture in which the components can be seen, as there are two or more phases present. One example of a mixture is air. Air is a homogeneous mixture of the gaseous substances nitrogen, oxygen, and smaller amounts of other substances. Salt, sugar, and many other substances dissolve in water to form homogeneous mixtures. A homogeneous mixture in which there is both a solute and solvent present is also a solution. Mixtures can have any amounts of ingredients.

The following table shows the main properties of the three families of mixtures.

HomogeneityHomogeneousVisually homogeneous

but microscopically heterogeneous

Particle size< 1 nm1 nm – 1 μm> 1 μm
Physically stableYesYesNeeds stabilizing agents
Exhibits Tyndall effectNoYesYes
Separates by centrifugationNoYesYes
Separates by decantationNoNoYes

The following table shows examples of the three types of mixtures.

Dispersion medium (Mixture phase)Dissolved or dispersed phaseSolutionColloidSuspension (Coarse dispersion)
GasGasGas mixture: air (oxygen and other gases in nitrogen)NoneNone
LiquidNoneLiquid aerosol:[7]
fog, mist, vapor, hair sprays
SolidNoneSolid aerosol:[7]
smoke, cloud, air particulates
oxygen in water
Liquid foam:
whipped cream, shaving cream
Sea foam, Beer head
alcoholic beverages
milk, mayonnaise, hand cream
sugar in water
Liquid sol:
pigmented ink, blood
mud (soil, clay or silt particles are suspended in water), chalk powder suspended in water
hydrogen in metals
Solid foam:
aerogel, styrofoam, pumice
dry sponge
amalgam (mercury in gold), hexane in paraffin wax
agar, gelatin, silicagel, opal
Wet sponge
alloys, plasticizers in plastics
Solid sol:
cranberry glass
Clay, Silt, Sand, Gravel, Granite

Physics and chemistry

A heterogeneous mixture is a mixture of two or more chemical substances (elements or compounds). Examples are: mixtures of sand and water or sand and iron filings, a conglomerate rock, water and oil, a portion salad, trail mix, and concrete (not cement). A mixture of powdered silver metal and powdered gold metal would represent a heterogeneous mixture of two elements.

Making a distinction between homogeneous and heterogeneous mixtures is a matter of the scale of sampling. On a coarse enough scale, any mixture can be said to be homogeneous, if the entire article is allowed to count as a "sample" of it. On a fine enough scale, any mixture can be said to be heterogeneous, because a sample could be as small as a single molecule. In practical terms, if the property of interest of the mixture is the same regardless of which sample of it is taken for the examination used, the mixture is homogeneous.

Gy's sampling theory quantitavely defines the heterogeneity of a particle as:[8]

h_i = \frac{(c_i - c_\text{batch})m_i}{c_\text{batch} m_\text{aver}} .

where h_i, c_i, c_\text{batch}, m_i, and m_\text{aver} are respectively: the heterogeneity of the ith particle of the population, the mass concentration of the property of interest in the ith particle of the population, the mass concentration of the property of interest in the population, the mass of the ith particle in the population, and the average mass of a particle in the population.

During sampling of heterogeneous mixtures of particles, the variance of the sampling error is generally non-zero.

Pierre Gy derived, from the Poisson sampling model, the following formula for the variance of the sampling error in the mass concentration in a sample:

V = \frac{1}{(\sum_{i=1}^N q_i m_i)^2} \sum_{i=1}^N q_i(1-q_i) m_{i}^{2} \left(a_i - \frac{\sum_{j=1}^N q_j a_j m_j}{\sum_{j=1}^N q_j m_j}\right)^2 .

in which V is the variance of the sampling error, N is the number of particles in the population (before the sample was taken), q i is the probability of including the ith particle of the population in the sample (i.e. the first-order inclusion probability of the ith particle), m i is the mass of the ith particle of the population and a i is the mass concentration of the property of interest in the ith particle of the population.

The above equation for the variance of the sampling error is an approximation based on a linearization of the mass concentration in a sample.

In the theory of Gy, correct sampling is defined as a sampling scenario in which all particles have the same probability of being included in the sample. This implies that q i no longer depends on i, and can therefore be replaced by the symbol q. Gy's equation for the variance of the sampling error becomes:

V = \frac{1-q}{q M_\text{batch}^2} \sum_{i=1}^N m_{i}^{2} \left(a_i - a_\text{batch} \right)^2 .

where abatch is that concentration of the property of interest in the population from which the sample is to be drawn and Mbatch is the mass of the population from which the sample is to be drawn.


  1. ^ Whitten K.W., Gailey K. D. and Davis R. E. (1992). General chemistry, 4th Ed. Philadelphia: Saunders College Publishing. ISBN 0-03-072373-6. 
  2. ^ Petrucci R. H., Harwood W. S., Herring F. G. (2002). General Chemistry, 8th Ed. New York: Prentice-Hall. ISBN 0-13-014329-4. 
  3. ^ De Paula, Julio; Atkins, P. W. Atkins' Physical Chemistry (7th ed.). ISBN 0-19-879285-9. 
  4. ^ Alberts B.; et al. (2002). Molecular Biology of the Cell, 4th Ed. Garland Science. ISBN 0-8153-4072-9. 
  5. ^ Laidler K. J. (1978). Physical chemistry with biological applications. Benjamin/Cummings. Menlo Park. ISBN 0-8053-5680-0. 
  6. ^ Weast R. C., Ed. (1990). CRC Handbook of chemistry and physics. Boca Raton: Chemical Rubber Publishing Company. ISBN 0-8493-0470-9. 
  7. ^ a b Everett, D. H. (23 July 1971). Manual of Symbols and Terminology for Physicochemical Quantities and Units. Appendix II Definitions, Terminology and Symbols in Colloid and Surface Chemistry. Part I (PDF) (Report). London: International Union of Pure and Applied Chemistry: Division of Physical Chemistry. Retrieved 28 October 2016. 
  8. ^ Gy, P (1979). Sampling of Particulate Materials: Theory and Practice. Amsterdam: Elsevier. 

IUPAC, Compendium of Chemical Terminology, 2nd ed. (the "Gold Book") (1997). Online corrected version:  (2006–) "mixture".

Text is available under the Creative Commons Attribution-ShareAlike License; additional terms may apply. By using this site, you agree to the Terms of Use and Privacy Policy. Wikipedia is a registered trademark of the Wikimedia Foundation, Inc., a non-profit organization.

Also On Wow


    Trending Now