Ads
related to: mm to inches calculator convertertemu.com has been visited by 1M+ users in the past month
Search results
Results from the WOW.Com Content Network
Conversion of the LPI to the DPI is done by simple multiplication: 150 LPI x 2 = 300 DPI Conversion between Lines per inch and Lines per cm. Countries using the metric system tend to use lines per centimeter (L/cm). In order to convert between L/in and L/cm the following formulas can be used: Lines per inch to lines per cm: L/cm = 0.394 x L/in
Conversion of units is the conversion of the unit of measurement in which a quantity is expressed, typically through a multiplicative conversion factor that changes the unit without changing the quantity. This is also often loosely taken to include replacement of a quantity with a corresponding quantity that describes the same physical property ...
For instance the same angle of 0.1 mrad will subtend 10 mm at 100 meters, 20 mm at 200 meters, etc., or similarly 0.39 inches at 100 m, 0.78 inches at 200 m, etc. Subtensions in mrad based optics are particularly useful together with target sizes and shooting distances in metric units. The most common scope adjustment increment in mrad based ...
A circular mil is a unit of area, equal to the area of a circle with a diameter of one mil (one thousandth of an inch or 0.0254 mm). It corresponds to approximately 5.067 × 10−4 mm2. It is a unit intended for referring to the area of a wire with a circular cross section. As the definition of the unit contains π, it is easy to calculate area ...
Gear inches is an imperial measure corresponding to the diameter in inches of the drive wheel of a penny-farthing bicycle with equivalent ( direct-drive) gearing. A commonly used metric alternative is known as metres of development or rollout distance, which specifies how many metres a bicycle travels per revolution of the crank.
In the table below conversions from mrad to metric values are exact (e.g. 0.1 mrad equals exactly 10 mm at 100 metres), while conversions of minutes of arc to both metric and imperial values are approximate. Comparison of minute of arc (MOA) and milliradian (mrad).
Imperial/U.S. The basic unit of length in the imperial and U.S. customary systems is the yard, defined as exactly 0.9144 m by international treaty in 1959. [2] [5] Common imperial units and U.S. customary units of length include: [6] thou or mil ( 1⁄1000 of an inch) inch ( 25.4 mm) foot (12 inches, 0.3048 m) yard (3 feet, 0.9144 m)
The metric system is a decimal -based system of measurement. The current international standard for the metric system is the International System of Units (Système international d'unités or SI), in which all units can be expressed in terms of seven base units: the metre, kilogram, second, ampere, kelvin, mole, and candela .
Ads
related to: mm to inches calculator convertertemu.com has been visited by 1M+ users in the past month