Search results
Results from the WOW.Com Content Network
There are anecdotal objections to the use of metric units in carpentry and the building trades, on the basis that it is easier to remember an integer number of inches plus a fraction than a measurement in millimeters, [9] or that foot-inch measurements are more suitable when distances are frequently divided into halves, thirds, and quarters ...
8.4 Input with fractions: 1 + 1 ⁄ 2 inches (38.1 mm) ... → 1 foot 3 inches (380 mm) However, converting metric units into feet and inches with ...
For 6/6 = 1.0 acuity, the size of a letter on the Snellen chart or Landolt C chart is a visual angle of 5 arc minutes (1 arc min = 1/60 of a degree), which is a 43 point font at 20 feet. [10] By the design of a typical optotype (like a Snellen E or a Landolt C), the critical gap that needs to be resolved is 1/5 this value, i.e., 1 arc min.
A 1:5 architectural scale (inches to feet) would be a 1:60 unitless scale (inches to inches) since there are 60 inches in 5 feet. Typical scales used in the United States are: [ 1 ] full scale, with inches, divided into sixteenths of an inch
Equivalent mesh sizes from 5 μm to 25.4 mm also exist. [1] [2] [3] Available sieve sizes are usually regulated by standards. Those in common use are ISO 565:1990 and ISO 3310-1:2000 (international), [4] EN 933-1(European) [5] and ASTM E11:01 (US). EN standards are available with national 'badging'; so they appear as BS EN, FR EN, DE EN, etc.
The result is expressed in inches and is usually (but not always) rounded to a convenient fraction. For instance, a 6.4x4.8 mm sensor has a diagonal of 8.0 mm and therefore an optical format of 8.0*3/2 = 12 mm, which is expressed as 1 ⁄ 2 inch in imperial units. The reason it is expressed in inches is historical, dating back to the early days ...
A graphical or bar scale. A map would also usually give its scale numerically ("1:50,000", for instance, means that one cm on the map represents 50,000cm of real space, which is 500 meters) A bar scale with the nominal scale expressed as "1:600 000", meaning 1 cm on the map corresponds to 600,000 cm=6 km on the ground.
[10] [11] [12]: 60–66 The system of Fournier was based on a different French foot of c. 298 mm. With the usual convention that 1 foot equals 12 inches, 1 inch (pouce) was divided into 12 lines (lignes) and 1 line was further divided into 6 typographic points (points typographiques). One Fournier point is about 0.0135 English inches.