WOW.com Web Search

Search results

1. Results from the WOW.Com Content Network

2. Forced-air gas - Wikipedia

   en.wikipedia.org/wiki/Forced-air_gas

   Gas-fired forced-air furnaces have a burner in the furnace fueled by natural gas. A blower forces cold air through a heat exchanger and then through duct-work that distributes the hot air through the building. [2] Each room has an outlet from the duct system, often mounted in the floor or low on the wall – some rooms will also have an opening ...

3. Steelmaking - Wikipedia

   en.wikipedia.org/wiki/Steelmaking

   Steel mill with two arc furnaces. Steelmaking is the process of producing steel from iron ore and/or scrap.In steelmaking, impurities such as nitrogen, silicon, phosphorus, sulfur, and excess carbon (the most important impurity) are removed from the sourced iron, and alloying elements such as manganese, nickel, chromium, carbon, and vanadium are added to produce different grades of steel.

4. Bessemer process - Wikipedia

   en.wikipedia.org/wiki/Bessemer_process

   Bessemer process. The Bessemer process was the first inexpensive industrial process for the mass production of steel from molten pig iron before the development of the open hearth furnace. The key principle is removal of impurities from the iron by oxidation with air being blown through the molten iron. The oxidation also raises the temperature ...

5. Coke (fuel) - Wikipedia

   en.wikipedia.org/wiki/Coke_(fuel)

   Coke is a grey, hard, and porous coal-based fuel with a high carbon content. It is made by heating coal or oil in the absence of air. Coke is an important industrial product, used mainly in iron ore smelting, but also as a fuel in stoves and forges. The unqualified term "coke" usually refers to the product derived from low-ash and low-sulphur ...

6. Industrial furnace - Wikipedia

   en.wikipedia.org/wiki/Industrial_furnace

   An industrial furnace, also known as a direct heater or a direct fired heater, is a device used to provide heat for an industrial process, typically higher than 400 degrees Celsius. [1] They are used to provide heat for a process or can serve as reactor which provides heats of reaction. Furnace designs vary as to its function, heating duty ...

7. Recuperator - Wikipedia

   en.wikipedia.org/wiki/Recuperator

   Recuperator. A recuperator is a special purpose counter-flow energy recovery heat exchanger positioned within the supply and exhaust air streams of an air handling system, or in the exhaust gases of an industrial process, in order to recover the waste heat. Generally, they are used to extract heat from the exhaust and use it to preheat air ...