Ads
related to: bicycle tire size conversion chart mm to inches printable chart colorsamazon.com has been visited by 1M+ users in the past month
Search results
Results from the WOW.Com Content Network
ISO 5775. ISO 5775 is an international standard for labeling the size of bicycle tires and rims. The system used was originally developed by the European Tyre and Rim Technical Organisation (ETRTO). It is designed to make tire sizing consistent and clear. It replaces overlapping informal systems that ambiguously distinguished between sizes.
Bicycle tire. A clincher bicycle tire mounted on a wheel. A cross section of a clincher tire with a puncture-preventing layer (in blue) between the casing and the tread. An inner tube rolled up for storage or to be carried as a spare. A bicycle tire is a tire that fits on the wheel of a bicycle or similar vehicle.
For bicycles with 700c wheels, some cyclists quote gear inches based on a nominal wheel diameter of 27 inches, corresponding to the old British tire size of 27 x 1 + 1 ⁄ 4" (ETRTO 630). Strictly speaking, the rolling diameter of a 700c wheel may be significantly higher or lower than 27", depending on the tire size, e.g. nearly 27.5" for a ...
A 700c "standard" wheel has a 622 mm rim diameter. The final wheel diameter depends on the specific tire but will be approximately 622 mm plus twice the tire width. Front/rear measurement only considers the sizes of a chainring and a rear sprocket. Gear inches and metres of development also take the size of the rear wheel into account.
Load index. The load index on a passenger-car tire is a numerical code stipulating the maximum load (mass, or weight) each tire can carry. For load range "B" tires, ETRTO (ISO-Metric) standards specify the load index rating at an inflation pressure of 36 psi (250 kPa) (table below), while P-Metric standards measure the load capacity at an inflation pressure of 35 psi (240 kPa).
Off-roading tires may use a different measurement scheme: Tread width × Outside diameter, followed by wheel size (all in inches) – for example 31×10.50R15 (787 mm × 267 mm R380 in metric designation). The size of the wheel, however, is denoted as 8.5 in × 20.0 in (220 mm × 510 mm).
Ads
related to: bicycle tire size conversion chart mm to inches printable chart colorsamazon.com has been visited by 1M+ users in the past month