Search results
Results from the WOW.Com Content Network
A network switch (also called switching hub, bridging hub, and, by the IEEE, MAC bridge [1]) is networking hardware that connects devices on a computer network by using packet switching to receive and forward data to the destination device. A network switch is a multiport network bridge that uses MAC addresses to forward data at the data link ...
The Nintendo Switch is a hybrid video game console, consisting of a console unit, a dock, and two Joy-Con controllers. [88] Although it is a hybrid console, Nintendo classifies it as "a home console that you can take with you on the go".
v. t. e. In electrical engineering, a switch is an electrical component that can disconnect or connect the conducting path in an electrical circuit, interrupting the electric current or diverting it from one conductor to another. [1] [2] The most common type of switch is an electromechanical device consisting of one or more sets of movable ...
GTO thyristors suffer from long switch-off times, whereby after the forward current falls, there is a long tail time where residual current continues to flow until all remaining charge from the device is taken away. This restricts the maximum switching frequency to about 1 kHz. It may be noted, however, that the turn-off time of a GTO is ...
Zero speed switch. Zero speed switches ( ZSS) also known as Speed Actuating Sensing Switches [1] are used to detect whether a rotating shaft is turning (even at very slow speeds) [2] in various machines, conveyors, power plants, and in industries involving the production of cement, sugar, textiles, paper, etc. Zero speed switches mainly use ...
Electronic switch. In electronics, an electronic switch is a switch controlled by an active electronic component or device. Without using moving parts, they are called solid state switches, which distinguishes them from mechanical switches. [1]
Switched capacitor. A switched capacitor ( SC) is an electronic circuit that implements a function by moving charges into and out of capacitors when electronic switches are opened and closed. Usually, non-overlapping clock signals are used to control the switches, so that not all switches are closed simultaneously.
Cam switch. Cam switches are mainly used within the low voltage range. On a shaft, switching cams are made of abrasion-resistant conductive material. By rotating the shaft, the contacts are opened or closed by the cams. Often, a plurality of cams are seated on a shaft, which simultaneously switch or switch several pairs of contacts.