WOW.com Web Search

Search results

1. Results from the WOW.Com Content Network

2. ISO 5775 - Wikipedia

   en.wikipedia.org/wiki/ISO_5775

   ISO 5775. ISO 5775 is an international standard for labeling the size of bicycle tires and rims. The system used was originally developed by the European Tyre and Rim Technical Organisation (ETRTO). It is designed to make tire sizing consistent and clear. It replaces overlapping informal systems that ambiguously distinguished between sizes.

3. Bicycle tire - Wikipedia

   en.wikipedia.org/wiki/Bicycle_tire

   Fatbike tires of 100 to 130 mm (4 to 5 inches) width are typically mounted on 65 to 100 mm rims. Forces and moments generated. Bicycle tires generate forces and moments between the wheel rim and the pavement that can affect bicycle performance, stability, and handling. Vertical force

4. Gear inches - Wikipedia

   en.wikipedia.org/wiki/Gear_inches

   For example, consider a 700c × 23 mm tire, which has a nominal cross-section of 23 mm. 700c wheels have a rim diameter of 622 mm. Hence the wheel diameter is (2 × 23 mm) + 622 mm = 668 mm which is equal to 26.3 inches (rounded to 1 decimal place). 26 inch mountain bicycle wheels have a rim diameter of 559 mm. This ignores factors that ...

5. Tire code - Wikipedia

   en.wikipedia.org/wiki/Tire_code

   Load index. The load index on a passenger-car tire is a numerical code stipulating the maximum load (mass, or weight) each tire can carry. For load range "B" tires, ETRTO (ISO-Metric) standards specify the load index rating at an inflation pressure of 36 psi (250 kPa) (table below), while P-Metric standards measure the load capacity at an inflation pressure of 35 psi (240 kPa).

6. 29er (bicycle) - Wikipedia

   en.wikipedia.org/wiki/29er_(bicycle)

   29er rims have an interior diameter of 622 millimetres (24.5 in) and the average 29″ mountain bike tire is (in ISO notation) 59-622 – corresponding to an outside diameter of about 29.15 inches (740 mm). The typical 26″ MTB tire has a rim diameter of 559 millimetres (22.0 in) and an outside tire diameter of about 26 inches (660 mm).

7. Bicycle gearing - Wikipedia

   en.wikipedia.org/wiki/Bicycle_gearing

   A 700c "standard" wheel has a 622 mm rim diameter. The final wheel diameter depends on the specific tire but will be approximately 622 mm plus twice the tire width. Front/rear measurement only considers the sizes of a chainring and a rear sprocket. Gear inches and metres of development also take the size of the rear wheel into account.