Search results
Results from the WOW.Com Content Network
System identification number. A system identification number ( SID) is broadcast by one or more base stations to identify a cellular network in a certain area (usually contiguous). It is globally unique within AMPS, TDMA or CDMA networks (the first two systems are essentially obsolete). This number sometimes has conflicts (see IFAST ).
Station identification. Station identification ( ident, network ID, channel ID or bumper) is the practice of radio and television stations and networks identifying themselves on-air, typically by means of a call sign or brand name (sometimes known, particularly in the United States, as a "sounder" or "stinger", more generally as a station or ...
A broadcast address is a network address used to transmit to all devices connected to a multiple-access communications network. A message sent to a broadcast address may be received by all network-attached hosts. In contrast, a multicast address is used to address a specific group of devices, and a unicast address is used to address a single ...
Facility ID – used by the FCC in the United States to distinguish broadcast stations without regard to call sign changes; External links. Call sign information for U.S. stations are set out in chapter I of the FCC rules, Title 47 (Telecommunication) of the Code of Federal Regulations (C.F.R.):
Cell Broadcast. Cell Broadcast ( CB) is a method of sending messages to multiple mobile telephone users in a defined area at the same time. It is defined by the ETSI 's GSM committee and 3GPP and is part of the 2G, 3G, 4G LTE (telecommunication) and 5G standards. [1] It is also known as Short Message Service -Cell Broadcast (SMS-CB) or CB SMS.
A network address is an identifier for a node or host on a telecommunications network. Network addresses are designed to be unique identifiers across the network, although some networks allow for local, private addresses, or locally administered addresses that may not be unique. [1] Special network addresses are allocated as broadcast or ...
Base station identity code. The base station identity code (BSIC), is a code used in GSM to uniquely identify a base station. The code is needed because it is possible that mobile stations receive the broadcast channel of more than one base station on the same frequency. This is due to frequency re-use in a cellular network.
An IPv6 network uses an address block that is a contiguous group of IPv6 addresses of a size that is a power of two. The leading set of bits of the addresses are identical for all hosts in a given network, and are called the network's address or routing prefix . Network address ranges are written in CIDR notation.