Search results
Results from the WOW.Com Content Network
Cable with shielding is known as shielded twisted pair (STP) and without as unshielded twisted pair (UTP). Explanation [ edit ] A twisted pair can be used as a balanced line , which as part of a balanced circuit can greatly reduce the effect of noise currents induced on the line by coupling of electric or magnetic fields.
Duplex (telecommunications) A duplex communication system is a point-to-point system composed of two or more connected parties or devices that can communicate with one another in both directions. Duplex systems are employed in many communications networks, either to allow for simultaneous communication in both directions between two connected ...
RG-59/U is a specific type of coaxial cable, often used for low-power video and RF signal connections. The cable has a characteristic impedance of 75 ohms, and a capacitance of around 20pF/ft (60pF/m). [1] The 75 ohm impedance matches a dipole antenna in free space. RG (for radio guide) was originally a unit indicator for bulk radio frequency ...
Category 4 cable ( Cat 4) is a cable that consists of eight copper wires arranged in four unshielded twisted pairs (UTP) supporting signals up to 20 MHz. [1] It is used in telephone networks which can transmit voice and data up to 16 Mbit /s. [2] For a brief period it was used for some Token Ring, [3] 10BASE-T, and 100BASE-T4 networks, but was ...
International standard ISO/IEC 11801 Information technology — Generic cabling for customer premises specifies general-purpose telecommunication cabling systems ( structured cabling) that are suitable for a wide range of applications (analogue and ISDN telephony, various data communication standards, building control systems, factory automation ).
Ethernet over twisted-pair technologies use twisted-pair cables for the physical layer of an Ethernet computer network. They are a subset of all Ethernet physical layers . Early Ethernet used various grades of coaxial cable, but in 1984, StarLAN showed the potential of simple unshielded twisted pair. This led to the development of 10BASE-T and ...
Category 5 cable is used in structured cabling for computer networks such as Ethernet over twisted pair. The cable standard prescribes performance parameters for frequencies up to 100 MHz and is suitable for 10BASE-T, 100BASE-TX (Fast Ethernet), 1000BASE-T (Gigabit Ethernet), and 2.5GBASE-T. 10BASE-T and 100BASE-TX Ethernet connections require ...
ANSI/TIA-568 is a technical standard for commercial building cabling for telecommunications products and services. The title of the standard is Commercial Building Telecommunications Cabling Standard and is published by the Telecommunications Industry Association (TIA), a body accredited by the American National Standards Institute (ANSI).