Ads
related to: cutting logs for lumber
Search results
Results from the WOW.Com Content Network
A method for logs over 19 in (48 cm) Quarter sawing or quartersawing is a woodworking process that produces quarter-sawn or quarter-cut boards in the rip cutting of logs into lumber. The resulting lumber can also be called radially-sawn or simply quartered. There is widespread confusion between the terms rift sawn and quarter sawn with the ...
Log bucking. A crew of log buckers with crosscut saws in 1914. [1] Bucking is the process of cutting a felled and delimbed tree into logs. [2] Significant value can be lost by sub-optimal bucking because logs destined for plywood, lumber, and pulp each have their own value and specifications for length, diameter, and defects.
McGiffert Log Loader in East Texas, US, c.1907. Lumber under snow in Montgomery, Colorado, 1880s. Logging is the process of cutting, processing, and moving trees to a location for transport. It may include skidding, on-site processing, and loading of trees or logs onto trucks [ 1 ] or skeleton cars. In forestry, the term logging is sometimes ...
Sawmill. A sawmill (saw mill, saw-mill) or lumber mill is a facility where logs are cut into lumber. Modern sawmills use a motorized saw to cut logs lengthwise to make long pieces, and crosswise to length depending on standard or custom sizes (dimensional lumber). The "portable" sawmill is simple to operate.
Diagonal- and stepped-cut rift-sawing is intermediate to flat-sawn and radial cut lumber. The angle of the bastard grain may differ along the width of the board or between opposing sides, and enhances the appearance of ray fleck. Flat-sawing is the quickest method, producing the least wood waste and largest possible boards from a log.
Flat sawing. Lumber produced by flat sawing from a log. Plank A has been cut from the middle, and is as wide as the original log. Plank B has been cut closer to the side, and shows slash grain. Flat sawing, flitch sawing or plain sawing is a woodworking process that produces flat-cut or plain-cut boards of lumber. [1]
The tree is turned into logs by removing the limbs (delimbing) and cutting it into logs of optimal length (bucking). The felled tree or logs are moved from the stump to the landing. Ground vehicles such as a skidder or forwarder can pull, carry, or shovel the logs. Cable systems "cars" can pull logs to the landing.
Rip cuts produce lumber of different cuts such as quarter sawn (A), flat or plain sawn (B), or rift sawn (other image). In woodworking, a rip-cut is a type of cut that severs or divides a piece of wood parallel to the grain. The other typical type of cut is a cross-cut, a cut perpendicular to the grain. Unlike cross-cutting, which shears the ...
Ads
related to: cutting logs for lumber