Ads
related to: phone line wire diagramtemu.com has been visited by 1M+ users in the past month
Search results
Results from the WOW.Com Content Network
A telephone line or telephone circuit (or just line or circuit industrywide) is a single-user circuit on a telephone communication system. It is designed to reproduce speech of a quality that is understandable. [1] It is the physical wire or other signaling medium connecting the user's telephone apparatus to the telecommunications network, and ...
When used for plain old telephone service (POTS), the first wire is known as the tip or A-leg (U.K.) conductor, and is usually connected to the positive side of a direct current (DC) circuit, while the second wire is known as the ring lead or B-leg (U.K.), and is connected to the negative side of the circuit. Neither of these two sides of the ...
Tip and ring are the two conductors or sides of a telephone line. Their names are derived from the telephone plugs used for connecting telephone calls in manual switchboards. One side of the line is connected to the metal tip of the plug, and the second is connected to a metal ring behind the tip, separated and insulated from the tip by a non ...
A telephone jack and a telephone plug are electrical connectors for connecting a telephone set or other telecommunications apparatus to the telephone wiring inside a building, establishing a connection to a telephone network. The plug is inserted into its counterpart, the jack, which is commonly affixed to a wall or baseboard.
Category 3 cable, commonly known as Cat 3 or station wire, and less commonly known as VG or voice-grade [1] (as, for example, in 100BaseVG ), is an unshielded twisted pair (UTP) cable used in telephone wiring. It is part of a family of standards defined jointly by the Electronic Industries Alliance (EIA) and the Telecommunications Industry ...
A telephone switch is the switching equipment of an exchange. A wire center is the area served by a particular switch or central office. A concentrator is a device that concentrates traffic, be it remote or co-located with the switch. An off-hook condition represents a circuit that is in use, e.g., when a telephone call is in progress.
A split-50 M-type 66 block with bridging clips attached. A 110 punch-down block. A punch-down block (also punchdown block, punch block, punchblock, quick-connect block and other variations) is a type of electrical connection often used in telephony. It is named because the solid copper wires are "punched down" into short open-ended slots which ...
Four-position, four-contact (4P4C) plug, used for connecting a telephone handset and base. Six-position, six-contact (6P6C) jack, which could be wired as RJ11, RJ14, or RJ25. A registered jack ( RJ) is a standardized telecommunication network interface for connecting voice and data equipment to a computer service provided by a local exchange ...
Ads
related to: phone line wire diagramtemu.com has been visited by 1M+ users in the past month