Search results
Results from the WOW.Com Content Network
Mobile phones. Within Australia, mobile phone numbers begin with 04 or 05 – the Australian national trunk code 0, plus the mobile indicator 4 or 5 – followed by eight digits. This is generally written as 04XX XXX XXX within Australia, or as +61 4XX XXX XXX for an international audience.
All telephone numbers in Iran have 11 digits (initial 0 and ten digits). The first two or three digits after the zero are the area code. The possibilities are: (0xx) xxxx xxxx (for landlines), 09xx xxx xxxx (for cellphones) and 099xx xxx xxx (for MVNO). When making a call within the same landline area code, initial 0 plus the area code must be ...
E.164 is an international standard (ITU-T Recommendation), titled The international public telecommunication numbering plan, that defines a numbering plan for the worldwide public switched telephone network (PSTN) and some other data networks. E.164 defines a general format for international telephone numbers.
The final codes changed to eight digits were the Queensland (070), (071), (076), (077) and (079) codes, which all changed to (07) 4yxx xxxx on 10 November 1997. In almost all cases, the former area code was incorporated into the new subscriber number: Canberra numbers went from (06) 2xx xxxx to (02) 62xx xxxx, numbers in the Northern Territory ...
Overview. The mobile country code consists of three decimal digits and the mobile network code consists of two or three decimal digits (for example: MNC of 001 is not the same as MNC of 01). The first digit of the mobile country code identifies the geographic region as follows (the digits 1 and 8 are not used): An MCC is used in combination ...
268 7xx. 10. NANP member. Argentina. +54. 9/15. 10. All carriers: Claro, Movistar, Personal, Tuenti. 15 before the local number but after long distance area code for national calls (0 11 15 xxxx-xxxx) and 9 placed after the international access code excluding the 15 for international calls (+54 9 11 xxxx-xxxx).
A telephone number serves as an address for switching telephone calls using a system of destination code routing. [1] Telephone numbers are entered or dialed by a calling party on the originating telephone set, which transmits the sequence of digits in the process of signaling to a telephone exchange. The exchange completes the call either to ...
This is a list of international dialing prefixes used in various countries for direct dialing of international telephone calls.These prefixes are typically required only when dialling from a landline, while in GSM-compliant mobile phone (cell phone) systems, only the symbol + before the country code may be used [citation needed] irrespective of where the telephone is used at that moment; the ...