Search results
Results from the WOW.Com Content Network
In a home or small office environment, the default gateway is a device, ... If router1 routing table does not have any route to 192.168.1.0/24, and PC3 tries to ...
The STM-1 frame is transmitted in exactly 125 μs, therefore, there are 8,000 frames per second on a 155.52 Mbit/s OC-3 fiber-optic circuit. [nb 1] The STM-1 frame consists of overhead and pointers plus information payload. The first nine columns of each frame make up the section overhead and administrative unit pointers, and the last 261 ...
DOCSIS 3.1 uses channel bandwidths of up to 192 MHz in the downstream. [13] Upstream: DOCSIS 1.0/1.1 specifies channel widths between 200 kHz and 3.2 MHz. DOCSIS 2.0 & 3.0 specify 6.4 MHz, but can use the earlier, narrower channel widths for backward compatibility. DOCSIS 3.1 uses channel bandwidths of up to 96 MHz in the upstream. Modulation:
Wi-Fi (/ ˈ w aɪ f aɪ /) [1] [a] is a family of wireless network protocols based on the IEEE 802.11 family of standards, which are commonly used for local area networking of devices and Internet access, allowing nearby digital devices to exchange data by radio waves.
This Linksys WRT54GS, a combined router and Wi‑Fi access point, operates using the 802.11g standard in the 2.4 GHz ISM band using signalling rates up to 54 Mbit/s. IEEE 802.11 Wi-fi networks are the most widely used wireless networks in the world, connecting devices like laptops (left) to the internet through a wireless router (right)
A bundle of optical fibers A TOSLINK fiber optic audio cable with red light shone in one end. An optical fiber, or optical fibre, is a flexible glass or plastic fiber that can transmit light [a] from one end to the other.
Bluetooth Low Energy (Bluetooth LE, colloquially BLE, formerly marketed as Bluetooth Smart [1]) is a wireless personal area network technology designed and marketed by the Bluetooth Special Interest Group (Bluetooth SIG) [2] aimed at novel applications in the healthcare, fitness, beacons, [3] security, and home entertainment industries. [4]
Generally, layers are named by their specifications: [9] 10, 100, 1000, 10G, ... – the nominal, usable speed at the top of the physical layer (no suffix = megabit/s, G = gigabit/s), excluding line codes but including other physical layer overhead (preamble, SFD, IPG); some WAN PHYs (W) run at slightly reduced bitrates for compatibility reasons; encoded PHY sublayers usually run at higher ...