Search results
Results from the WOW.Com Content Network
Geographic coordinate conversion has applications in cartography, surveying, navigation and geographic information systems . In geodesy, geographic coordinate conversion is defined as translation among different coordinate formats or map projections all referenced to the same geodetic datum. [1] A geographic coordinate transformation is a ...
Conversion of units is the conversion of the unit of measurement in which a quantity is expressed, typically through a multiplicative conversion factor that changes the unit without changing the quantity. This is also often loosely taken to include replacement of a quantity with a corresponding quantity that describes the same physical property ...
Hanyu Pinyin. shìyòngzhì. Wade–Giles. shih-yung-chih. Chinese units of measurement, known in Chinese as the shìzhì ("market system"), are the traditional units of measurement of the Han Chinese. Although Chinese numerals have been decimal (base-10) since the Shang, several Chinese measures use hexadecimal (base-16). [citation needed]
From these figures for the size of a Biblical ell, that of the basic unit — the finger-breadth ( Etzba) — can be calculated to be either 2.1 or 2.2 cm (0.83 or 0.87 in); Rav Avraham Chaim Naeh approximates at 2 cm (0.79 in); Talmudic scholar Chazon Ish at 2.38 cm (0.94 in). The mile ( Mil) is thus about 963 or 1146 meters (3160 or 3760 ft ...
The centimetre ( SI symbol: cm) is a unit of length in the metric system equal to 10−2 metres ( 1 100 m = 0.01 m ). To help compare different orders of magnitude, this section lists lengths between 10 −2 m and 10 −1 m (1 cm and 1 dm). 1 cm – 10 millimetres. 1 cm – 0.39 inches. 1 cm – edge of a square of area 1 cm 2.
Different lengths as in respect to the electromagnetic spectrum, measured by the metre and its derived scales.The microwave is between 1 meter to 1 millimeter.. The millimetre (international spelling; SI unit symbol mm) or millimeter (American spelling) is a unit of length in the International System of Units (SI), equal to one thousandth of a metre, which is the SI base unit of length.
An input unit can be converted to any number of output units—the outputs are specified as a "combination" by separating unit codes with a space (" ") or a plus (" + "). Using a space as a separator does not work if any of the unit codes contains a space. For example, each of the following converts 1.2 km 2 to acres, square yards, and hectares.
A geoid is needed to convert the 3D position to sea-level elevation. Pressure altimeter measuring atmospheric pressure, which decreases as altitude increases. Since atmospheric pressure varies with the weather, too, a recent local measure of the pressure at a known altitude is needed to calibrate the altimeter. Stereoscopy in aerial photography.