Ad
related to: apa itu access point wifi range map
Search results
Results from the WOW.Com Content Network
The traffic indication map information element is covered under section 7.3.2.6 of 802.11-1999 standard. [1] The IEEE 802.11 standards use a bitmap to indicate to any sleeping listening stations that the access point (AP) has buffered data waiting for it. Because stations should listen to at least one beacon during the listen interval, the AP ...
Dynamic Frequency Selection (DFS) is a channel allocation scheme specified for wireless LANs, commonly known as Wi-Fi. It is designed to prevent electromagnetic interference by avoiding co-channel operation with systems that predated Wi-Fi, such as military radar , satellite communication , and weather radar , and also to provide on aggregate a ...
Wireless ad hoc network. A wireless ad hoc network[1] (WANET) or mobile ad hoc network (MANET) is a decentralized type of wireless network. The network is ad hoc because it does not rely on a pre-existing infrastructure, such as routers or wireless access points. Instead, each node participates in routing by forwarding data for other nodes.
IEEE 802.11g-2003 or 802.11g is an amendment to the IEEE 802.11 specification that operates in the 2.4 GHz microwave band. The standard has extended link rate to up to 54 Mbit/s using the same 20 MHz bandwidth as 802.11b uses to achieve 11 Mbit/s. This specification, under the marketing name of Wi‑Fi, has been implemented all over the world.
CAPWAP. The Control And Provisioning of Wireless Access Points (CAPWAP) protocol is a standard, interoperable networking protocol that enables a central wireless LAN Access Controller (AC) to manage a collection of Wireless Termination Points (WTPs), more commonly known as wireless access points. The protocol specification is described in RFC 5415.
Wireless access point. In computer networking, a wireless access point (WAP) (also just access point (AP)) is a networking hardware device that allows other Wi-Fi devices to connect to a wired network or wireless network. As a standalone device, the AP may have a wired or wireless connection to a switch or router, but in a wireless router it ...
TamoGraph is used for measuring and visualizing such WLAN characteristics [5] as signal strength, signal-to-noise ratio, signal-to-interference ratio, TCP and UDP throughput rates, access point vendor, encryption type, [citation needed] etc. [6] Visualizations are overlaid on floor plans [7] or, in case of outdoor surveys, on site maps that can be imported from one of the online map services.
A mesh basic service set (MBSS) is a self-contained network of mesh stations that share a mesh profile, defined in 802.11s. [9] Each node may also be an access point hosting its own basic service set, for example using the mesh BSS to provide Internet access for local users. In such a system, the BSS created by the access point is distinct from ...
Ad
related to: apa itu access point wifi range map