Search results
Results from the WOW.Com Content Network
Mobile phones. Within Australia, mobile phone numbers begin with 04 or 05 – the Australian national trunk code 0, plus the mobile indicator 4 or 5 – followed by eight digits. This is generally written as 04XX XXX XXX within Australia, or as +61 4XX XXX XXX for an international audience.
Zone 5 uses eight 2-digit codes (51–58) and two sets of 3-digit codes (50x, 59x) to serve South and Central America. Zone 6 uses seven 2-digit codes (60–66) and three sets of 3-digit codes (67x–69x) to serve Southeast Asia and Oceania. Zone 7 uses an integrated numbering plan; two digits (7x) determine the area served: Russia or Kazakhstan.
By 1994, there were six area codes of two digits covering Sydney (02), Melbourne (03), Canberra (06), Brisbane (07), Adelaide (08) and Perth (09), 48 area codes of three digits, from (002) covering Hobart to (099) covering mid-west Western Australia, and one area code of four digits, Kangaroo Island (0848), which was not incorporated into a larger area code before 1994.
001. Guyana. Hong Kong (also 002 – circuit switched connection for fax/data transmission) Mongolia. 0011. Australia (including Australian External Territories) 009. Nigeria. 00x, where x is a mandatory carrier selection code consisting of one or more digits.
Country Code: +61 International Call Prefix: 0011 Trunk Prefix: 0. Telephone numbers in Australia consist of a single-digit area code (prefixed with a '0' when dialing within Australia) and eight-digit local numbers, the first four, five or six of which specify the exchange, and the remaining four, three or two a line at that exchange.
List of FIPS country codes. This is a list of FIPS 10-4 country codes for Countries, Dependencies, Areas of Special Sovereignty, and Their Principal Administrative Divisions. The two-letter country codes were used by the US government for geographical data processing in many publications, such as the CIA World Factbook.
The sortable table below contains the three sets of ISO 3166-1 country codes for each of its 249 countries, links to the ISO 3166-2 country subdivision codes, and the Internet country code top-level domains (ccTLD) which are based on the ISO 3166-1 alpha-2 standard with the few exceptions noted. See the ISO 3166-3 standard for former country codes.
All telephone numbers in Iran have 11 digits (initial 0 and ten digits). The first two or three digits after the zero are the area code. The possibilities are: (0xx) xxxx xxxx (for landlines), 09xx xxx xxxx (for cellphones) and 099xx xxx xxx (for MVNO). When making a call within the same landline area code, initial 0 plus the area code must be ...