Search results
Results from the WOW.Com Content Network
The common-emitter circuit is the most widely used of junction transistor amplifiers. As compared with the common-base connection, it has higher input impedance and lower output impedance. A single power supply is easily used for biasing. In addition, higher voltage and power gains are usually obtained for common-emitter (CE) operation.
In electronics, a common collector amplifier (also known as an emitter follower) is one of three basic single-stage bipolar junction transistor (BJT) amplifier topologies, typically used as a voltage buffer. In this circuit the base terminal of the transistor serves as the input, the emitter is the output, and the collector is common to both ...
Terminal 3 (common), emitter; giving x to be e; i i, base current (i b) i o, collector current (i c) V in, base-to-emitter voltage (V BE) V o, collector-to-emitter voltage (V CE) and the h-parameters are given by: h ix = h ie for the common-emitter configuration, the input impedance of the transistor (corresponding to the base resistance r pi).
Common base. In electronics, a common-base (also known as grounded-base) amplifier is one of three basic single-stage bipolar junction transistor (BJT) amplifier topologies, typically used as a current buffer or voltage amplifier. In this circuit the emitter terminal of the transistor serves as the input, the collector as the output, and the ...
The narrowing of the collector does not have a significant effect as the collector is much longer than the base. The emitter–base junction is unchanged because the emitter–base voltage is the same. Base-narrowing has two consequences that affect the current: There is a lesser chance for recombination within the "smaller" base region.
In graphical analysis of nonlinear electronic circuits, a load line is a line drawn on the current–voltage characteristic graph for a nonlinear device like a diode or transistor. It represents the constraint put on the voltage and current in the nonlinear device by the external circuit. The load line, usually a straight line, represents the ...
Low-voltage positive emitter-coupled logic (LVPECL) is a power-optimized version of PECL, using a positive 3.3 V instead of 5 V supply. PECL and LVPECL are differential-signaling systems and are mainly used in high-speed and clock-distribution circuits. A common misconception is that PECL devices are slightly different from ECL devices.
Fig. 1 shows the common-base Colpitts circuit. The inductor L and the series combination of C 1 and C 2 form the resonant tank circuit, which determines the frequency of the oscillator. The voltage across C 2 is applied to the base-emitter junction of the transistor, as feedback to create oscillations. Fig. 2 shows the common-collector version.