Search results
Results from the WOW.Com Content Network
Power factor. In electrical engineering, the power factor of an AC power system is defined as the ratio of the real power absorbed by the load to the apparent power flowing in the circuit. Real power is the average of the instantaneous product of voltage and current and represents the capacity of the electricity for performing work.
For instance, a power factor of 0.68 means that only 68 percent of the total current supplied (in magnitude) is actually doing work; the remaining current does no work at the load. Power Factor is very important in Power sector substations. Form the national grid the sub sectors are required to have minimum amount of power factor.
The Q factor is a measure of its efficiency: the higher the Q factor of the capacitor, the closer it approaches the behavior of an ideal capacitor. Dissipation factor is its reciprocal. Ripple current. Ripple current is the AC component of an applied source (often a switched-mode power supply) whose frequency may be constant or varying. Ripple ...
Hardness. In materials science, hardness (antonym: softness) is a measure of the resistance to localized plastic deformation, such as an indentation (over an area) or a scratch (linear), induced mechanically either by pressing or abrasion. In general, different materials differ in their hardness; for example hard metals such as titanium and ...
Pseudocapacitors were named for their ability to store electric energy electro-chemically with reversible faradaic charge-transfer. Hybrid capacitors combine double-layer and pseudocapacitors to increase power density. Silver mica, glass, silicon, air-gap and vacuum capacitors are named for their dielectric.
Thermoelectric materials [1] [2] show the thermoelectric effect in a strong or convenient form. The thermoelectric effect refers to phenomena by which either a temperature difference creates an electric potential or an electric current creates a temperature difference. These phenomena are known more specifically as the Seebeck effect (creating ...
Capacity factor. US EIA monthly capacity factors 2011-2013. The net capacity factor is the unitless ratio of actual electrical energy output over a given period of time to the theoretical maximum electrical energy output over that period. [1] The theoretical maximum energy output of a given installation is defined as that due to its continuous ...
Voltage optimisation. Voltage optimisation is a term given to the systematic controlled reduction in the voltages received by an energy consumer to reduce energy use, power demand and reactive power demand. While some voltage 'optimisation' devices have a fixed voltage adjustment, others electronically regulate the voltage automatically.