Ad
related to: rack unit calculator
Search results
Results from the WOW.Com Content Network
Rack with sample component sizes including an A/V half-rack unit. A rack unit (abbreviated U or RU) is a unit of measure defined as 1 + 3 ⁄ 4 inches (44.45 mm). [1] [2] It is most frequently used as a measurement of the overall height of 19-inch and 23-inch rack frames, as well as the height of equipment that mounts in these frames, whereby the height of the frame or equipment is expressed ...
The 19-inch (482.6 mm) standard rack arrangement is widely used throughout the telecommunications, computing, audio, video, entertainment and other industries, though the Western Electric 23-inch standard, with holes on 1-inch (25.4 mm) centers, is still used in legacy ILEC / CLEC facilities. Nineteen-inch racks in two-post or four-post form ...
Horizontal pitch (HP) is a unit of length defined by the Eurocard printed circuit board standard used to measure the horizontal width of rack mounted electronic equipment, similar to the rack unit (U) used to measure vertical heights of rack mounted equipment. One HP is 0.2 inches (1/5") or 5.08 millimetres wide.
List of gear nomenclature. This page lists the standard US nomenclature used in the description of mechanical gear construction and function, together with definitions of the terms. The terminology was established by the American Gear Manufacturers Association (AGMA), under accreditation from the American National Standards Institute (ANSI).
Horizontal pitch (HP) is a unit of length defined by the Eurocard printed circuit board standard used to measure the horizontal width of rack mounted electronic equipment, similar to the rack unit (U) used to measure vertical heights of rack mounted equipment. One HP is 0.2 inches (5.08 mm) wide. [1][2] A standard 19-inch rack is 95 HP wide of ...
Uninterruptible power supply. An uninterruptible power supply (UPS) or uninterruptible power source is a type of continual power system that provides automated backup electric power to a load when the input power source or mains power fails. A UPS differs from a traditional auxiliary / emergency power system or standby generator in that it will ...
The height of rack rail is determined by the number of rack units required for mounting the equipment. The design of racks and rack rails is specified in ECIA - EIA/ECA-310. Each rack unit (U) is equivalent to 1 + 3 ⁄ 4 in (44 mm). Most rack rail is in sizes from 2 units high (3 + 1 ⁄ 2 in or 89 mm) to 54 units high (78 + 3 ⁄ 4 in or ...
The steering ratio is the ratio of the number of degrees of turn of the steering wheel to the number of degrees the wheel (s) turn as a result. In motorcycles, delta tricycles and bicycles, the steering ratio is always 1:1, because the steering wheel is fixed to the front wheel. A steering ratio of x:y means that a turn of the steering wheel x ...
Ad
related to: rack unit calculator