Ads
related to: equipment rack unit size chart
Search results
Results from the WOW.Com Content Network
Rack with sample component sizes including an A/V half-rack unit. A rack unit (abbreviated U or RU) is a unit of measure defined as 1 + 3 ⁄ 4 inches (44.45 mm). [1] [2] It is most frequently used as a measurement of the overall height of 19-inch and 23-inch rack frames, as well as the height of equipment that mounts in these frames, whereby the height of the frame or equipment is expressed ...
A 23-inch (580 mm) rack is used for housing telephone (primarily), computer, audio, and other equipment though is less common than the 19-inch rack. The size denotes the width of the faceplate for the installed equipment. The rack unit is a measure of vertical spacing and is common to both the 19 and 23-inch racks.
The width of devices that are mounted on a 35 mm "top hat" DIN rail generally use "modules" as a width unit, one module being 18 mm wide. For example, a small device (e.g. a circuit breaker) may have a width of 1 module (18 mm wide), while a larger device may have a width of 4 modules (4 × 18 mm = 72 mm).
The height of rack rail is determined by the number of rack units required for mounting the equipment. The design of racks and rack rails is specified in ECIA - EIA/ECA-310. Each rack unit (U) is equivalent to 1 + 3 ⁄ 4 in (44 mm). Most rack rail is in sizes from 2 units high (3 + 1 ⁄ 2 in or 89 mm) to 54 units high (78 + 3 ⁄ 4 in or ...
Horizontal pitch (HP) is a unit of length defined by the Eurocard printed circuit board standard used to measure the horizontal width of rack mounted electronic equipment, similar to the rack unit (U) used to measure vertical heights of rack mounted equipment. One HP is 0.2 inches (1/5") or 5.08 millimetres wide.
EIA/ECA-310 Cabinets, Racks, Panels, and Associated Equipment, maintained by the ECIA (includes 19-inch racks, rack units) [2] EIA/TIA-329-B Minimum Standards for Communication Antennas Part I - Base Station Antennas; EIA/TIA-329-B-1 Minimum Standards for Communication Antennas Part II - Vehicular Antennas; EIA-343 Formerly RS-343. Signal ...
Pallet rack is a material handling storage aid system designed to store materials on pallets (or “skids”). Although there are many varieties of pallet racking, all types allow for the storage of palletized materials in horizontal rows with multiple levels. Forklift trucks are usually required to place the loaded pallets onto the racks for ...
3U (5.06 inches or 128.5 mm), where height "U" is measured in rack units, rounded for a lip (nb: 3U in standard rack units would be 5.25 inches or 133.3 mm). 1HP (0.2 inches or 5.08 mm), where width "HP" is measured in horizontal pitch units. A card width is generally integer multiples of 1HP, although some manufactures work in multiples of 0.5HP.
Ads
related to: equipment rack unit size chart