Ads
related to: equipment rack unit size guidetoolots.com has been visited by 10K+ users in the past month
apluswhs.com has been visited by 10K+ users in the past month
Search results
Results from the WOW.Com Content Network
Rack with sample component sizes including an A/V half-rack unit. A rack unit (abbreviated U or RU) is a unit of measure defined as 1 + 3 ⁄ 4 inches (44.45 mm). [1] [2] It is most frequently used as a measurement of the overall height of 19-inch and 23-inch rack frames, as well as the height of equipment that mounts in these frames, whereby the height of the frame or equipment is expressed ...
A 23-inch (580 mm) rack is used for housing telephone (primarily), computer, audio, and other equipment though is less common than the 19-inch rack. The size denotes the width of the faceplate for the installed equipment. The rack unit is a measure of vertical spacing and is common to both the 19 and 23-inch racks.
The width of devices that are mounted on a 35 mm "top hat" DIN rail generally use "modules" as a width unit, one module being 18 mm wide. For example, a small device (e.g. a circuit breaker) may have a width of 1 module (18 mm wide), while a larger device may have a width of 4 modules (4 × 18 mm = 72 mm).
The height of rack rail is determined by the number of rack units required for mounting the equipment. The design of racks and rack rails is specified in ECIA - EIA/ECA-310. Each rack unit (U) is equivalent to 1 + 3 ⁄ 4 in (44 mm). Most rack rail is in sizes from 2 units high (3 + 1 ⁄ 2 in or 89 mm) to 54 units high (78 + 3 ⁄ 4 in or ...
Material-handling equipment. Material handling equipment (MHE) is mechanical equipment used for the movement, storage, control, and protection of materials, goods and products throughout the process of manufacturing, distribution, consumption, and disposal. [1] The different types of equipment can be classified into four major categories: [2 ...
Eurocard (printed circuit board) Eurocard is an IEEE standard format for printed circuit board (PCB) cards that can be plugged together into a standard chassis which, in turn, can be mounted in a 19-inch rack. The chassis consists of a series of slotted card guides on the top and bottom, into which the cards are slid so they stand on end, like ...
Ads
related to: equipment rack unit size guidetoolots.com has been visited by 10K+ users in the past month
apluswhs.com has been visited by 10K+ users in the past month