Ads
related to: gas furnace not turning onlocationwiz.com has been visited by 10K+ users in the past month
doconsumer.com has been visited by 10K+ users in the past month
Search results
Results from the WOW.Com Content Network
Steel mill with two arc furnaces. Steelmaking is the process of producing steel from iron ore and/or scrap.In steelmaking, impurities such as nitrogen, silicon, phosphorus, sulfur, and excess carbon (the most important impurity) are removed from the sourced iron, and alloying elements such as manganese, nickel, chromium, carbon, and vanadium are added to produce different grades of steel.
Gas-fired forced-air furnaces have a burner in the furnace fueled by natural gas. A blower forces cold air through a heat exchanger and then through duct-work that distributes the hot air through the building. [2] Each room has an outlet from the duct system, often mounted in the floor or low on the wall – some rooms will also have an opening ...
Coke is a grey, hard, and porous coal-based fuel with a high carbon content. It is made by heating coal or oil in the absence of air. Coke is an important industrial product, used mainly in iron ore smelting, but also as a fuel in stoves and forges. The unqualified term "coke" usually refers to the product derived from low-ash and low-sulphur ...
Bessemer process. The Bessemer process was the first inexpensive industrial process for the mass production of steel from molten pig iron before the development of the open hearth furnace. The key principle is removal of impurities from the iron by oxidation with air being blown through the molten iron. The oxidation also raises the temperature ...
The distribution network is more costly to build than for gas or electric heating, and so is only found in densely populated areas or compact communities. Not all central heating systems require purchased energy. A few buildings are served by local geothermal heat, using hot water or steam from a local well to provide building heat.
Furnace (central heating) An oil furnace. A furnace (American English), referred to as a heater or boiler in British English, is an appliance used to generate heat for all or part of a building. Furnaces are mostly used as a major component of a central heating system. Furnaces are permanently installed to provide heat to an interior space ...
A pilot light is a small gas flame, usually natural gas or liquefied petroleum gas, which serves as an ignition source for a more powerful gas burner. Originally a pilot light was kept permanently alight, but this wastes gas. Now it is more common to light a burner electrically, but gas pilot lights are still used when a high energy ignition ...
Recuperator. A recuperator is a special purpose counter-flow energy recovery heat exchanger positioned within the supply and exhaust air streams of an air handling system, or in the exhaust gases of an industrial process, in order to recover the waste heat. Generally, they are used to extract heat from the exhaust and use it to preheat air ...
Ads
related to: gas furnace not turning onlocationwiz.com has been visited by 10K+ users in the past month
doconsumer.com has been visited by 10K+ users in the past month